焦作矿区电法探测导,含水构造的效果

应用直流电法仪在井下进行了工作面巷道底板电测深和掘进头超前探测，查清了工作面底板水层的富水性和掘进头前头的地质构造及含水情况。目前，大部分探测结果已得到生产实践的证实。     

沉降量约束下的黄骅裂谷形成的地球的动力学模式

在计算覆盖整个黄晔裂谷２００口人工井（包括少部分探井）沉降量的基础上，总结本区二种基本沉降曲线模式。统计出热沉降（Ｓｔ）与初始沉降（Ｓｉ）之比为０．６，依此为约束条件与大陆岩石圈伸展的地球动力学正演模式进行对比，与简单剪切模式预测的热沉降与初始沉降之比值及几何效应更接近。进一步证实黄骅裂谷以简单剪切机制形成的地球动力学模式更合理，这与著名的以纯剪模式形成的北海伸展盆地不同     

煤层倾角与覆岩变形破裂分带

地下采煤中三带(冒落带、裂隙带、弯曲带)高度的判断是预测采空引起地表变形破坏程度的依据。在诸多的影响因素中, 煤层倾角是控制三带高度的最主要因素。建立在实测统计基础上的经验范围值用于三带高度的判断带有一定的人为性。急倾斜煤层中冒落带和裂隙带高度随煤层倾角变化的规律已被褐示[7].通过弹塑性岩石材料的非线性有限元模拟, 本文提出了利用应力重分布图判断中、缓倾角煤层采空区覆岩三带高度的方法, 并应用于实际工程。     

川滇地区活动地块现今地壳形变特征

位于青藏高原东南缘的川滇菱形块体的地壳运动主要以鲜水河、安宁河、则木河、小江、红河、澜沧江、龙门山等深大断裂的强烈构造活动为特征,新生代以来受青藏高原物质向东侧流动及阿萨姆顶点楔入的作用,使该地区构造活动复杂,地震活动强烈而频繁,是研究地壳形变与地震的有利地区之一.但由于形变观测资料时空分布的制约,以前很多学者对川滇地区活动断裂的GPS形变研究主要以大尺度为主,主要反映川滇块体的整体运动特征,而对于利用GPS研究各个块体间的相互作用及其对边界带的活动构造的作用缺少深入的分析,本文正是基于1998～2002年间该地区200多GPS点位的三期GPS复测资料(网络工程和973项目),将川滇地区分为9个次级活动块体,计算了各个活动块体的欧拉旋转矢量和主要活动断裂的运动速度,并分析了该地区的应变场特征和地震危险性.结果表明川滇地区活动块体的运动有以下特点:     

中国南方海相含油气保存单元的层次划分与综合评价

以最近十年中国南方的海相新区油气勘探评价成果为依托 ,以油气成藏和整体封闭保存体系评价为核心 ,在渝东—湘鄂西、中下扬子和滇黔桂三大区域划分出 9个有利区块 5 1个含油气保存单元 ,并将其归纳为四个层次。综合评价认为 ,方西和石柱保存单元具有较好的整体封存体系 ,属持续性含油气保存单元 ,为首选勘探目标 ;江汉盆地南部、句容—海安区块、南鄱阳坳陷、楚雄盆地东北部具备或基本具备整体封存条件 ,属于沉积重建型含油气保存单元 ,通过精细勘探可望获得商业性油气流 ;楚雄盆地西北部、南盘江坳陷、十万大山盆地和渝东—湘鄂西地区利川复向斜由于晚期强烈构造改造而仅存在部分封存体系 ,需要攻关探索 ;思茅、渝东—湘鄂西地区的花果坪和桑植—石门地区已失去整体封闭保存条件 ,仅局部存在封存体系 ,地质条件高度复杂 ,勘探风险甚高。     

鹤壁市雷暴短时监测和临近预报流程

利用卫星云图数字化资料、雷达探测和雷电定位探测资料对雷暴天气进行短时监测 ,并与多种短期预报方法集成 ,建立时效为 3～ 6小时的雷暴临近预报流程 ,从而达到预测强对流天气之目的。     

Late Quaternary systematic stream offsets caused by repeated large seismic events along the Kunlun fault, northern Tibet

The Kunlun fault is one of the largest strike-slip faults in northern Tibet, China. In this paper, we focus upon the Kusai Lake–Kunlun Pass segment of the fault to understand the geomorphic development of offset streams caused by repeated large seismic events, based on tectono-geomorphic analysis of high-resolution satellite remote sensing images combined with field studies. The results indicate that systematic left-lateral stream offsets appear at various scales across the fault zone: Lateral offsets of small gullies caused by the 2001 M_w 7.8 Kunlun earthquake vary typically from 3 m to 6 m, meanwhile streams with cumulative offsets of 10 m, 25–30 m, 50–70 m, 250–300 m and 750–1400 m have resulted from repeated large seismic events during the late Quaternary. An average slip rate of 10 ± 1 mm/year has been estimated from the lateral stream offsets and ¹⁴C ages of alluvial fan surfaces incised by the streams. A three-dimensional model showing tectono-geomorphic features along a left-lateral strike-slip fault is also presented. The Kusai Lake–Kunlun Pass segment provides an opportunity to understand the relationship between geomorphic features produced by individual large seismic events and long-term geomorphic development caused by repeated large seismic events along a major strike-slip fault.     

Refined modeling and movement characteristics analyses of irregularly shaped particles

Irregularly shaped (IRS) particles widely exist in many engineering and industrial fields. The macro physical and mechanical properties of the particle system are governed by the interaction between the particles in the system. The interaction between IRS particles is more complicated because of their complex geometric shape with extremely irregular and co‐existed concave and convex surfaces. These particles may interlock each other, making the sliding and friction of IRS particles more complex than that of particles with regular shape. In order to study the interaction of IRS particles more efficiently, a refined method of constructing discrete element model based on computed tomography scanning of IRS particles is proposed. Three parameters were introduced to control the accuracy and the number of packing spheres. Subsequently, the inertia tensor of the IRS particle model was optimized. Finally, laboratory and numerical open bottom cylinder tests were carried out to verify the refined modeling method. The influence of particle shape, particle position, and mesoscopic friction coefficient on the interaction of particles was also simulated. It is noteworthy that with the increase of mesoscopic friction coefficient, the fluidity of IRS particle assembly decreases, and intermittent limit equilibrium state may appear. Copyright © 2014 John Wiley & Sons, Ltd.     

Development of a soil moisture‐based distributed hydrologic model for determining hydrologically based critical source areas

A simple grid cell‐based distributed hydrologic model was developed to provide spatial information on hydrologic components for determining hydrologically based critical source areas. The model represents the critical process (soil moisture variation) to run‐off generation accounting for both local and global water balance. In this way, it simulates both infiltration excess run‐off and saturation excess run‐off. The model was tested by multisite and multivariable evaluation on the 50‐km² Little River Experimental Watershed I in Georgia, U.S. and 2 smaller nested subwatersheds. Water balance, hydrograph, and soil moisture were simulated and compared to observed data. For streamflow calibration, the daily Nash‐Sutcliffe coefficient was 0.78 at the watershed outlet and 0.56 and 0.75 at the 2 nested subwatersheds. For the validation period, the Nash‐Sutcliffe coefficients were 0.79 at the watershed outlet and 0.85 and 0.83 at the 2 subwatersheds. The per cent bias was less than 15% for all sites. For soil moisture, the model also predicted the rising and declining trends at 4 of the 5 measurement sites. The spatial distribution of surface run‐off simulated by the model was mainly controlled by local characteristics (precipitation, soil properties, and land cover) on dry days and by global watershed characteristics (relative position within the watershed and hydrologic connectivity) on wet days when saturation excess run‐off was simulated. The spatial details of run‐off generation and travel time along flow paths provided by the model are helpful for watershed managers to further identify critical source areas of non‐point source pollution and develop best management practices.