Response of upper ocean currents to typhoons at two ADCP moorings west of the Luzon Strait

We deployed two ADCP mooring systems west of the Luzon Strait in August 2008, and measured the upper ocean currents at high frequency. Two typhoons passed over the moorings during approximately one-month observation period. Using ADCP observations, satellite wind and heat flux measurements, and high-resolution model assimilation products, we studied the response of the upper ocean to typhoons. The first typhoon, Nuri, passed over one of the moorings, resulting in strong Ekman divergence and significant surface cooling. The cooling of surface water lagged the typhoon wind forcing about one day and lasted about five days. The second typhoon, Sinlaku, moved northward east of the Luzon Strait, and did not directly impact currents near the observation regions. Sinlaku increased anomalous surface water transport exchange across the Luzon Strait, which modulated the surface layer current of the Kuroshio.     

黄河源地区草地退化空间特征

利用黄河源地区1985年和2000年1：100000土地利用／覆被数据,结合1：250000DEM、道路和居民点数据与野外调查资料,分析草地退化与坡向、海拔及距道路和居民点距离之间的关系．探讨黄河源区15年间土地覆被变化特征与规律。结果表明,退化草地占源区总面积的8．24％,冬春季牧场退化率显著高于夏季牧场：草地退化是黄河源区研究时段内土地利用／覆被变化最主要的特征。草地退化表现为：①阳坡退化率高于阴坡;②受人口密度影响,草地退化率与海拔高度成反比,相关系数为．0．925;③距离居民点越近。退化率越高。尤其当与居民点距离≤12km时,草地退化率与其相关系数高达-0．996;④在距道路4km以内．草地退化率与道路距离成反比．相关系数高达-0．978。1985年以来,源区的草地退化有自然因素的影响．但人类活动的影响仍起主导作用。科学地减少当地居民对草地的过分依赖是解决脆弱的江河源区环境退化的根本。     

地震电磁卫星精密定轨方法研究

高精度卫星轨道是提高卫星应用水平的基础,卫星精密定轨方法主要基于卫星轨道动力学理论．通过跟踪卫星轨迹的测轨技术,将几何和动力学信息进行融合。地震电磁卫星拟采用星载GPS和综合轨道求解方法进行精密定轨．并辅之以人卫激光测距,其定轨的精度可达厘米级。     

微塑料添加对小麦苗期生长及干物质分配的影响

土壤环境中微塑料污染已成为全球关注的环境问题。关于微塑料对于植物生长的直接影响和由于土壤理化性状改变的间接影响研究已逐步开展,但针对小麦的研究鲜见报道。试验选择两个旱地小麦品种(甘春27和禾尚头)作为研究对象,选取高密度聚乙烯作为微塑料添加,设置3种质量浓度(0、1、4 g·kg^-1)开展盆栽试验,对不同微塑料组合处理下小麦的出苗率、株高、全株生物量和地上/地下干物质分配进行了分析。结果表明：(1)微塑料添加对两个品种出苗率没有影响。(2)禾尚头在添加1 g·kg^-1微塑料时比添加0、4 g·kg^-1时全株生物量分别高46.7%、8.5%,甘春27在添加1 g·kg^-1微塑料时比添加0、4 g·kg^-1时全株生物量分别高28.7%、17.2%;甘春27整体比禾尚头在3种浓度处理下全株生物量分别高24.9%、9.6%、1.5%。(3)不同试验处理条件下,甘春27将更多的干物质分配在地上植株的构建,其在地下(根系)和地上(茎叶)部分的分配比例整体小于禾尚头。整体上,适度微塑料添加可...     

青藏高原高寒草地净初级生产力(NPP)时空分异

基于1982-2009 年间的遥感数据和野外台站生态实测数据,利用遥感生产力模型(CASA模型) 估算青藏高原高寒草地植被净初级生产力(NPP),分别从地带属性(自然地带、海拔高程、经纬度)、流域、行政区域(县级) 等方面对其时空变化过程进行分析,阐述了1982 年以来青藏高原高寒草地植被NPP的时空格局与变化特征。结果表明:① 青藏高原高寒草地NPP多年均值的空间分布表现为由东南向西北逐渐递减;1982-2009 年间,青藏高原高寒草地的年均总NPP为177.2×10¹² gC·yr^-1,单位面积年均植被NPP为120.8 gC·m^-2yr^-1;② 研究时段内,青藏高原高寒草地年均NPP 在112.6~129.9 gC·m^-2yr^-1 间,呈波动上升的趋势,增幅为13.3%;NPP 增加的草地占草地总面积的32.56%、减少的占5.55%;③ 青藏高原多数自然地带内的NPP呈增加趋势,仅阿里山地半荒漠、荒漠地带NPP呈轻微减低趋势,其中高寒灌丛草甸地带和草原地带的NPP增长幅度明显大于高寒荒漠地带;年均NPP增加面积比随着海拔升高呈现"升高—稳定—降低"的特点,而降低面积比则呈现"降低—稳定—升高"的特征;④ 各主要流域草地年均植被NPP均呈现增长趋势,其中黄河流域增长趋势显著且增幅最大。植被NPP和盖度及生长季时空变化显示,青藏高原高寒草地生态系统健康状况总体改善局部恶化。     

Geospatial Information Integration for Authoritative and Crowd Sourced Road Vector Data

This article describes results from a research project undertaken to explore the technical issues associated with integrating unstructured crowd sourced data with authoritative national mapping data. The ultimate objective is to develop methodologies to ensure the feature enrichment of authoritative data, using crowd sourced data. Users increasingly find that they wish to use data from both kinds of geographic data sources. Different techniques and methodologies can be developed to solve this problem. In our previous research, a position map matching algorithm was developed for integrating authoritative and crowd sourced road vector data, and showed promising results ( Anand et al. 2010 ). However, especially when integrating different forms of data at the feature level, these techniques are often time consuming and are more computationally intensive than other techniques available. To tackle these problems, this project aims at developing a methodology for automated conflict resolution, linking and merging of geographical information from disparate authoritative and crowd‐sourced data sources. This article describes research undertaken by the authors on the design, implementation, and evaluation of algorithms and procedures for producing a coherent ontology from disparate geospatial data sources. To integrate road vector data from disparate sources, the method presented in this article first converts input data sets to ontologies, and then merges these ontologies into a new ontology. This new ontology is then checked and modified to ensure that it is consistent. The developed methodology can deal with topological and geometry inconsistency and provide more flexibility for geospatial information merging.     

AutoCAD与ArcGIS数据转换研究与应用

结合珠海市空间数据自适应动态更新系统的建设实践,提出AutoCAD与ArcGIS空间数据转换技术路线。阐述了这一过程中数据标准建立、质量控制和数据转换等关键技术。在此基础上,编程实现AutoCAD与GIS空间数据的相互转换以及空间数据库中GIS数据与AutoCAD数据的直接转换。试验结果显示,AutoCAD空间数据在编码、规整、转换和质检等处理后,可生成符合标准的GIS数据。     

Multi‐Scale Qualitative Location: A Topology‐Based Model

Qualitative locations describe spatial objects by relating the spatial objects to a frame of reference (e.g. a regional partition in this study) with qualitative relations. Existing models only formalize spatial objects, frames of reference, and their relations at one scale, thus limiting their applicability in representing location changes of spatial objects across scales. A topology‐based, multi‐scale qualitative location model is proposed to represent the associations of multiple representations of the same objects with respect to the frames of reference at different levels. Multi‐scale regional partitions are first presented to be the frames of reference at multiple levels of scale. Multi‐scale locations are then formalized to relate multiple representations of the same objects to the multiple frames of reference by topological relations. Since spatial objects, frames of reference, and topological relations in qualitative locations are scale dependent, scale transformation approaches are presented to derive possible coarse locations from detailed locations by incorporating polygon merging, polygon‐to‐line and polygon‐to‐point operators.     

江苏省“十一五”省级基础测绘规划实施方案研究

在分析了江苏基础测绘状况的基础上,介绍了"十一五"基础测绘的原则、目标和任务,提出了组织实施方案和保障措施.     

三维城市模型的研究与实践(英文)

The way we interact with spatial data has been changed from 2D map to 3D Virtual Geographic Environment (VGE). Three-dimensional representations of geographic information on a computer are known as VGE, and in particular 3D city models provide an efficient way to integrate massive, heterogenous geospatial information and georeferenced information in urban areas. 3D city modeling (3DCM) is an active research and practice topic in distinct application areas. This paper introduces different modeling paradigms employed in 3D GIS, virtual environment, and AEC/FM. Up-to-date 3DCM technologies are evolving into a data integration and collaborative approach to represent the full spatial coverage of a city, to model both aboveground and underground, outdoor and indoor environments including man-made objects and natural features with 3D geometry, appearance, topology and semantics. Supported by the National Natural Science Foundation of China ( No. 40871212, No. 40671158), the Leading Academic Discipline Project of Shanghai Educational Committee( No.J50104).