Mercury speciation in surface and deep waters of the Mediterranean Sea

Mercury speciation and its distribution in surface and deep waters of the Mediterranean Sea were studied during two oceanographic cruises on board the Italian research vessel URANIA in summer 2003 and spring 2004 as part of the Med Oceaneor and MERCYMS projects. The study included deep water profiles of dissolved gaseous Hg (DGM), reactive Hg (RHg), total Hg (THg), monomethyl Hg (MeHg) and dimethyl Hg (DMeHg) in open ocean waters. Average concentrations of measured Hg species were characterized by seasonal and spatial variations. Overall average THg concentrations ranged between 0.41 and 2.65 pM (1.32 ± 0.48 pM) and were comparable to those obtained in previous studies of the Mediterranean Sea. A significant fraction of Hg was present as “reactive” Hg (average 0.33 ± 0.32 pM). Dissolved gaseous Hg (DGM), which consists mainly of Hg⁰, represents a considerable proportion of THg (average 20%, 0.23 ± 0.11 pM). The portion of DGM typically increased towards the bottom, especially in areas with strong tectonic activity (Alboran Sea, Strait of Sicily, Tyrrhenian Sea), indicating its geotectonic origin. No dimethyl Hg was found in surface waters down to the depth of 40 m. Below this depth, its average concentration was 2.67 ± 2.9 fM. Dissolved fractions of total Hg and MeHg were measured in filtered water samples and were 0.68 ± 0.43 pM and 0.29 ± 0.17 pM for THg and MeHg respectively. The fraction of Hg as MeHg was in average 43%, which is relatively high compared to other ocean environments. The concentrations reported in this study are among the lowest found in marine environments and the quality of analytical methods are of key importance. Speciation of Hg in sea water is of crucial importance as THg concentrations alone do not give adequate data for understanding Hg sources and cycling in marine environments. For example, photoinduced transformations are important for the presence of reactive and elemental mercury in the surface layers, biologically mediated reactions are important for the production/degradation of MeHg and DGM in the photic zones of the water column, and the data for DGM in deep sea indicate the natural sources of Hg in geotectonicaly active areas of the Mediterranean Sea.     

A comparison of Hα and soft X-ray characteristics of spotless and spot group flares

A comparative analysis of spotless and spot group flares recorded at Hvar and Kanzelhöhe Observatories during the 21st cycle of solar activity is presented. The rate of occurrence of two-ribbon flares was found to be significantly higher for the spotless flares. In comparison with spot group flares of corresponding H importance, the soft X-ray peak values have been systematically lower for the spotless flares. The highest peak values and the energy released in soft X-rays was found for flares with a H ribbon protruding over a major spot umbra. It was found that the effective plasma temperatures in spotless flares have been considerably lower than the temperatures in spot group flares.     

Tunneling and interference of Alfvén waves

The propagation and interference of Alfvén waves in magnetic regions is studied. A multilayer approximation of the standard models of the solar atmosphere is used. In each layer, there is a linear law of temperature variation and a power law of Alfvén velocity variation. The analytical solutions of a wave equation are stitched at the layer boundaries. The low-frequency Alfvén waves (P > 1 s) are able to transfer the energy from sunspots into the corona by tunneling only. The chromosphere is not a resonance filter for the Alfvén waves. The interference and resonance of Alfvén waves are found to be important to wave propagation through the magnetic coronal arches. The transmission coefficient of Alfvén waves into the corona increases sharply on the resonance frequences. To take into account the wave absorption in the corona, a method of equivalent schemes is developed. The heating of a coronal arch by Alfvén waves is discussed.     

Damage risk assessment of breakwaters under tsunami attack

Turkey was struck by two major events on 17 August and 12 November 1999, named Izmit (M _w = 7.4) and Düzce (M _w = 7.2) earthquakes, respectively. Rubble mound breakwaters in Izmit Bay experienced little damage, as forecasted by the new risk assessment model in which tsunami occurrence risk was included in the damage estimations. In order to determine the occurrence probability of structural damage under design conditions, including the environmental loading parameters of tsunami and storm waves, tidal range and storm surge, the Conditional Expections Monte Carlo simulation was applied in the risk assessment model developed in this study for the Esenköy Fishery Harbour, Turkey. A tsunami was not the key design parameter when compared to storm waves for the main breakwater of the harbour, however, in places with great seismic activity, the tsunami risk should be important depending on the occurrence probability and magnitude of the tsunami.     

Petrology and geochemistry of orthoamphibolites from the Variscan metamorphic sequences of the South Tisia in Croatia – an overview with geodynamic implications

In the southern Pannonian Basin, the Variscan Barrovian- and overprinted Abukuma-type progressive metamorphic sequences of the South Tisia in Slavonian Mts. (SM) and Mt. Moslava)ka Gora (MG) are interlayered with orthoamphibolites. These sequences represent part of a disrupted Variscan belt that extends southeastwards of the Bohemian Massif through the Carpathians to the Caucasus. Orthoamphibolites contain hornblende (Mg-hornblende, tschermakite, pargasite, and edenite), plagioclase An_48-98 (MG) and An_26-35 (SM), biotite, grossular (MG) and almandine (SM) enriched garnet, diopside (MG), with accessory ilmenite, titanite, and clinozoisite. Based on major and trace element analyses and CIPW norms, these orthoamphibolites, which originally were olivine tholeiites to slightly alkalic basalts, can be correlated with tholeiites of consuming plate margins. '¹⁸O of orthoamphibolites varies from 5.8 to 7.1‰, the measured ⁸⁷Sr/⁸⁶Sr ratio from 0.70435 to 0.70665, which indicates slight continental crust contamination, and the calculated ratio from 0.70262 to 0.70535, indicating an upper mantle origin of the original basaltic melts. For associated penecontemporaneous I-type granitoids, the calculated initial ⁸⁷Sr/⁸⁶Sr ratio also have upper mantle values ranging between 0.70293 and 0.70368. Geochemical data for orthoamphibolites and the associated penecontemporaneous I-type granites, and the occurrence of alpine-type ultramafic bodies within the Barrovian sequence, indicate that they have many features in common with orogenic associations related to recent subduction-related settings. Some characteristic element ratios suggest back-arc basin environments and the Ce/K vs. Ce diagram suggests a pargasite-lherzolite source. Its partial melting gave primitive basaltic melts of olivine tholeiite to slight alkalic affinities that produced at first differentiated mafic rocks by olivine fractionation (future orthoamphibolites) and, afterwards, a strongly differentiated suite of I-type granitoids by amphibole fractionation. Magma emplacement and subsequent AFC processes took place in subduction environments preceding the main Variscan deformational metamorphic event during which orthoamphibolites were generated. This interpretation is compatible with geodynamic modeling of this part of the Paleotethys.     

β-环糊精包合态三氟氯氰杀虫剂的制备

为了进一步提高三氟氯氰菊酯农药的防治效果。寻找适宜的农药新剂型，我们用液相法制备了三氟氯氰菊酯－β－环糊精包合物，并以水为基质进行了稳定性观察，同时又以差热分析法和气相色谱法确认了包合物的形成，以旋光度法证明两者间的包合比。结果表明，三氟氯氰菊酯与β-环糊精可形成1：1型包合物，该包合物稳定性高，具有一定的水溶性，而且在水中稳定，所以有望通过环糊 包合作用将三氟氯氰菊酯帛成水剂；当以气相法测试包合态三氟氯氰菊酯含量时，必须将其解络，使之成为游离状态，然后按常规方法进行含量测定。     

1906年玛纳斯7.7级地震孕震过程的数值模拟研究

根据玛纳斯 7 7级强震区的构造格架 ,利用三维有限元方法对 190 6年玛纳斯 7 7级地震的强震区进行了应力模拟研究。结果表明 ,玛纳斯地震的震源区不仅位于应力集中的部位 ,而且该部位集中的应力还会随着时间的增长而增大。数值模拟较好地再现了 190 6年玛纳斯 7 7级地震震源区的应力积累过程     

Mechanical aspects of sedimentary basin formation: development of integrated models for lithospheric and surface processes

Different assumptions for the thermo-mechanical properties of the lithosphere strongly affect predictions inferred from quantitative sedimentary basin modeling. Examples from various basins, selected as natural laboratories, illustrate the importance of incorporating a finite strength of the extending lithosphere in forward stratigraphic modeling of large-scale basin stratigraphy. Current models can effectively couple erosion at uplifted rift shoulders of extensional basins with the basin fill architecture of the subsiding basin compartments. Modeling of the synrift strata integrates spatial scales characteristic for subbasins, such as the Oseberg field in the North Sea, with large-scale lithospheric properties characterizing the bulk strength of extending lithosphere. Modeling of compressional basins in foreland fold-and-thrust-belt settings can effectively link lithospheric flexure with surface processes. Scales pertinent to short-term spatial and temporal variations in basin fill and basin deformation can now be addressed, allowing the quantitative investigation of consequences of different modes of thrusting for basin fill geometry and facies characteristics.     

Croatia — a coastal and maritime country

Croatia, through its geographic position, is a Mediterranean/Adriatic and Central European/Danube state. As an Adriatic coastal state, it has a long maritime tradition, which is apparent in its well-developed shipping (2.4 million GT), the high-quality ship-building industry (among the top six in the world) and through its numerous sea ports, of which many were established in ancient times. The leading national port is Rijeka, which is at the same time an important transit port for Austria, Hungary, Slovakia and the Czech Republic.The exceptionally indented Croatian Adriatic coast with its attractive archipelagos and favorable climatic and oceanographic conditions in the coastal sea offers very advantageous conditions for comprehensive tourist utilization. This is particularly true of nautical tourism, which is complimented by a larger number of constructed and well-equipped yachting ports/marinas on the coast and islands.