Ship hull drag reduction using bottom air injection

The idea of bottom air injection to reduce ship hull resistance is not new. Early patents envisioned planing hull applications. Recent planing hull tests speed realized an increase of 7–12 knots. River barges and ship fitted with an air injection system results are presented to show a 10–15% reduction in the frictional resistance. Graphs for making initial estimates for displacement hulls with bottom air injection are presented. It is clear from these results that improvements in high speed planing catamarans and full form hull resistance can be realized by using bottom air injection.     

Effects of water on strength and failure mode of coarse-grained granites at 300°C

Summary Deformation experiments have been performed in a triaxial compression cell at a temperature of 300°C and confining pressures up to 65 MPa using samples of homogeneous, fresh two-mica-granite (RM) and monzogranite (CM). The cylindrical specimens (d=70 mm, h=140 mm, V=540 cm³) were tested undrained under dry (105°C), as received, and water saturated conditions at deformation rates between and . The mechanical behaviour of the two types of coarse-grained, crystalloblastic granites is critically influenced by mineralogical composition, porosity, and the amount of intergranular water present in the samples. The failure stress of the CM granite is at about 65% of that of the RM granite; in both rocks strength decreases with increasing porosity and water content.The presence of interstitial water causes a failure mode of non-localized, homogeneously distributed microcracking in the central parts of the samples, whereas, in runs with dry granites, strain localization along a single shear fracture was observed. When aqueous fluids are present, the macroscopic style of deformation of granites appears to be ductile even at lowP andT conditions. Strength and angle of internal friction are reduced to very low values. The style of deformation, as well as the reduction of strength of the water-saturated rock samples, is due to mechanical and chemical effects of intergranular water at elevated temperatures.The maximum differential stresses measured for these coarse-grained granites are much lower than the strength commonly reported for other granites, e. g. Westerly and Charcoal granites. Our data suggest that the strength of the granitic crust under differential stress is lower than currently deduced from laboratory experiments.     

Synthetic zeolites formed from expanded perlite: Type,formation conditions and properties

Summary The starting material used was expanded perlite with a grain size < 40 m (74.5 wt.% SiO₂; 12.5 wt.% Al₂O₃). This material is a waste product obtained during the production of expanded perlite. The experiments were carried out with KOH solutions, mixtures of KOH and NaOH solutions (1:1) as well as NaOH solutions in the concentration range 0.5 N to 6.0 N at temperatures of between 100° and 140°C and with reaction periods of 2 hours to 13 days in closed system. In the experiments with KOH containing solutions zeolite ZK-19 (phillipsite), W (merlinoite), G (chabazite) and F (edingtonite) formed. Without addition of aluminium high percentages of zeolite ZK-19 (80–100 wt.%) and zeolite W (90–100 wt.%) were obtained. The addition of aluminium rendered possibly the formation of 90 to 100 wt.% of zeolite G and 85 to 100 wt.% of zeolite F, respectively. In the experiments with NaOH solutions analcime, zeolite Na-Pc (gismondine), zeolite HS (sodalite hydrate) and zeolite A formed. High percentages of zeolite Na-Pc (90–100 wt.%), zeolite HS (up to 100 wt.%) and analcime (up to 100 wt.%) were synthesized without addition of aluminium. The formation of high percentages of zeolite A (95–100 wt.%), however, needs the addition of aluminium, NaCI and seed crystals. The temperature stability of the zeolites decreases in the following sequence: K-F > K-W K-ZK-19 (Na), K-W Na, K-F G_si-rich (Na), K-ZK-19 >> Na-Pc G_si-poor. Zeolite A has a very good temperature stability up to temperatures of } 550 °C similar to that of zeolite K-W. At higher temperatures, however, its stability is very poor. The NH₄ ⁺-exchange capacities (meq/g) of the different zeolites amount to the following values: ZK-19:2.8 - 3.2; W:3.0 - 3.2; G:2.3 - 3.6; A:3.1 - 3.2; Na-Pc:3.5 - 3.6; F : 3.9 - 4.8.

---

Zeolithsynthese aus Blähperlit—Art, Bildungsbedingungen und Eigenschaften

Zusammenfassung Ausgangsmaterial der experimentellen Untersuchungen war Blähperlit mit einer Korngröße < 40 ,m (74,5 Gew.-% SiO₂; 12,5 Gew.-% Al₂O₃). Dieses Material ist ein Abfallprodukt, das bei der Produktion von Blähperlit anfällt. Die Experimente wurden mit KOH-Lösungen, Lösungsgemischen aus KOH und NaOH (1:1) sowie mit NaOH-Losungen im Konzentrationsbereich 0,5 n-6,0 n bei Temperaturen von 100° – 140°C und über Reaktionszeiten von 2 Stunden bis zu 13 Tagen im geschlossenen System durchgeführt. In den Experimenten mit KOH-hältigen Lösungen bildeten sich die Zeolithe ZK-19 (Phillipsit), W (Merlinoit), G (Chabasit) und F (Edingtonit). Hohe Prozentgehalte an Zeolith ZK-19 (80 – 100 Gew.-%) und Zeolith W (90–100 Gew.-%) entstehen nur ohne Zugabe von Aluminium. Die Bildung von 90–100 Gew.-% Zeolith G bzw. 85–100 Gew. % Zeolith F ist dagegen durch die Zugabe von Aluminium möglich. In den Experimenten mit NaOH-Lösungen bildeten sich die Zeolithe Analcim, Na-Pc (Gismondin), HS (Sodalithhydrat) und Zeolith A. Hohe Prozentanteile an Zeolith Na-Pc (90–100 Gew.-%), HS (bis zu 100 Gew. %) und Analcim (bis zu 100 Gew.-%) wurden ohne Aluminium-Zugabe synthetisiert. Die Bildung von hohen Gehalten an Zeolith A (95–100 Gew. %) ist jedoch nur unter Zugabe von Aluminium, NaCl und Kristallkeimen möglich.Die Temperaturbeständigkeit der Zeolithe nimmt in der folgenden Reihenfolge ab: K-F > K-W - K-ZK-19 (Na), K-W Na, K-F G_si-reich (Na), K-ZK-19 >> Na-Pc G_si-am. Zeolith A weist bis zu Temperaturen von etwa 550°C eine gute Temperaturbeständigkeit auf, die in etwa der von Zeolith K-W entspricht. Bei höheren Temperaturen ist die Beständigkeit jedoch sehr gering.Die NH⁴⁺-Austauschkapazitäten (mÄqu/g) der verschiedenen Zeolithe erreichen folgende Werte: ZK-19:2,8 - 3,2; W:3,0 - 3,2; G:2,3 - 3,6; A:3,1 - 3,2; Na-Pc:3,5 -3,6; F:3,9 - 4,8.

---

---

With 2 Figures     

Crystal chemistry of a highly disordered Mg-Al natural spinel

Summary A Mg-Al spinel from a xenolith found in the Sacrofano volcanic area (Latium, Italy) was investigated by X-ray single crystal diffraction and electron microprobe. Its main structural parameters were: a₀ = 8.0922(3) Å and the oxygen coordinate u = 0.26213(4), which gave to tetrahedral and octahedral bond distances of 1.9220(6) Å and 1.9299(3) Å respectively. Cation distribution, obtained from structural and chemical data, showed a very high Mg-Al disorder, with an Al(T) content of 0.205 and an inversion parameter, i, of about 0.23. Comparison with the cation distribution of a spinel with similar chemical composition but occurring in chlorite schists (Shishimsk Mountains, Urals, Russia) with a₀ = 8.1003(3) Å and u=0.26330(3), and with data from the literature concerning spinels from metamorphosed limestones (Kalkbro, Sweden) and websteritic dikes (Balmuccia, Italy), all characterized by much lower Mg-Al disorder (i about 0.13–0.12), suggests a completely different thermal history, with rapid cooling rates and consequent high closure temperature of intracrystalline exchange, consistent with the Sacrofano geological environment.

---

Kristallchemie eines stark ungeordneten, natürlichen Mg-Al-Spinells

Zusammenfassung Ein Mg-Al-Spinell aus einem Xenolith des Vulkangebiets von Sacrifano (Latium, Italien) wurde mit Röngten-Einkristallmethoden und der Elektronenmikrosonde untersucht. Die wichtigsten Strukturparameter sind a_o = 8,0922(3) Å und die Sauerstoffkoordinate u = 0,26213(4), was zu den tetraedrischen und oktaedrischen Bindungsabständen von 1,9220(6) Å bzw. 1,9299(3) Å führt. Die aus den strukturellen und chemischen Daten erhaltene Kationenverteilung zeigt eine sehr starke Unordnung Mg-Al mit einem Al (T)-Gehalt von 0,205 und einem Inversionsparameteri von ca. 0,23. Der Vergleich mit der Kationenverteilung eines Spinells ähnlicher chemischer Zusammensetzung, aber aus Chloritschiefern (Schischimsk-Berge, Ural, Rußland) mit a₀ = 8,1003(3) Å und u=0,26330(3), sowie mit Literaturdaten über Spinelle aus metamorphen Kalken (Kalkbro, Schweden) und websteritischen Gängen (Balmuccia, Italien), die alle durch eine viel geringere Mg-Al-Unordnung charakterisiert sind (i etwa 0,13–0,12), weist auf eine völlig andere thermische Geschichte hin, und zwar mit rascher Abkühlungsgeschwindigkeit und hoher Schließungstemperatur des intrakristallinen Austausches, was mit den geologischen Verhältnissen von Sacrofino in Übereinstimmung steht.

     

Optical anisotropy of zoned magnetites due to form birefringence

Summary Five polished samples of zoned magnetites from skarn deposits showed optical anisotropy effects under the ore microscope, though X-ray powder diffraction investigations indicated cubic magnetite. Using high magnification ore microscopy (oil immersion lenses, monochromatic light), extremely fine zones with slightly different reflectivity were observed. Scanning electron microscopy (SEM) of etched samples confirmed zones with a thickness between a few m and 100 nm. EDX analyses showed differences in the composition of these zones, ranging from almost pure magnetite to contents of CaO, MgO, A1₂O₃, SiO₂ up to 4 wt.% in total. Thus, the extremely thin, parallel zones of magnetite, with slightly different compositions and different optical constants (reflectivity, absorption, refraction), obviously lead to optical anisotropy due to form birefringence.

---

Optische anisotropie zonarer Magnetite aufgrund von formdoppelbrechung

Zusammenfassung Fünf Anschliffe von zonar gebauten Magnetiten aus Skarn-Lagerstätten zeigten unter dem Erzmikroskop optische Anisotropie-Erscheinungen, obwohl Röntgen-Pulverauf-nahmen kubischen Magnetit ergaben. Mittels hochauflösender Erzmikroskopie (Öl-Immersion, monochromatisches Licht) wurden extrem feine Zonierungen mit etwas unterschiedlichem Reflexionsvermögen beobachtet. Rasterelektronenmikroskopie (SEM) von angeätzten Proben bestätigte eine Zonendicke zwischen einigen Yin und 100 nm. EDX Analysen zeigten Unterschiede in der Zusammensetzung dieser Zonen, die von fast reinem Magnetit bis zu CaO-, MgO-, A1₂O_3-, SiO₂-Gehalten von insgesamt 4 Gew.% reichen. Offensichtlich fiihren die extrem diinnen, parallelen Zonierungen mit unterschiedlicher Zusammensetzung, und folglich unterschiedlichen optischen Konstanten (Reflexion, Absorption, Lichtbrechung) zu optischer Anisotropie durch Formdoppelbrechung.

     

Mountain restoration: Soil and surface wildlife habitat

Much wildlife habitat is being destroyed by extractive resource industries in mountain environments. This article illustrates how mountain wildlife habitat was restored in a devastated area. A strip mine for coal on the east slopes of the Alberta Rockies, occupied during its operations by Rocky Mountain bighorn sheep (Ovis canadensis canadensis, Shaw 1803), was reclaimed as bighorn habitat. By considering the behaviour and habitat requirements of bighorns in conjunction with an operating coal mine and reclamation process, a large coal mining company has been able to reconstruct the mine site restoration to benefit mountain sheep. Although bighorn habitat requirements are well known, it was not until the animal and its requirements were studied against the backdrop of an operating coal mine that obvious recommendations regarding the maintenance and placement of high steep excavated rock faces were made and accepted by the government regulatory agencies. An open pit mine is a devastated landscape; trees, soil and overburden are removed to retrieve coal that may be up to 215 m underground. Overburden and soil are returned, but the disturbance compares to the barren landscapes left behind by glaciers. Contouring of the land, grading of overburden and soil, seeding with grass and legume mixtures and extensive fertilization are designed to speed plant colonization and soil development. By examining the bighorn's biological needs with respect to specific mining operations, a unique opportunity arose to employ McHarg's design with nature concept. This approach incorporates environmental and societal values into every aspect of development, and promotes the evaluation of the constraints and opportunities arising. The sheep numbered about 200. Their seasonal movements were similar to those found on native ranges. They used the reclaimed areas as winter range and for the mineral licks exposed during mining; in summer, the sheep moved to nearby alpine areas. Two thirds of all sightings were confined to 1.3 km² of reclaimed grassland; its average productivity (4190 kg/ha) exceeded native ranges (1700 kg/ha). The body mass of female sheep in autumn equalled that of the largest in Alberta, but the skull dimensions were not larger than those of adjacent ranges. Infestation with lungworms was moderate. Lamb production and survival were high. Design criteria should be: feeding areas should be dry and lie within 300 m of escape terrain, which should have a slope of 40% and contain at least three benches. Rock piles should be placed on grazing areas. Mineral licks, a vital welfare factor, already existed within the high walls created by strip mining.     

The character of the fine fractions of the bottom sediments of the Bohemian part of the Labe (Elbe) river

The amounts of fractions with size 63 m in the bottom sediments of the Bohemian part of the Labe (Elbe) river is variable. The grain-size distribution is poorly to very poorly sorted with a mean particle size from 5.1 to 12.2 m.The crystalline phase of recent sediments of the Labe river draining various types of parent rocks has a simple mineral composition, with predominant mica/illite, quartz, kaolinite and chlorite (±vermiculite ±smectite). There are also very small amounts of interstratification of 10 Å and 14 Å sheet silicates (11–13.6 Å). Small amounts of Na-rich plagioclase, K-feldspar and calcite have also been found; accessory amounts of amphibole, authigenic gypsum and pyrite are also present. Opal in diatomic tests is an omnipresent constituent. In the amorphic inorganic phase, hydrated oxides predominate, where Si >Al >Fe >Mn in a ratio of 64:28:22:1. The greatest amount of amorphous inorganic and organic phases were found in the 4 m fraction.A considerable part of the detrital material originates from soils formed on various igneous, metamorphic and sedimentary rocks, transported to the Labe by other rivers or directly by erosion in the immediate vicinity of the Labe river.     

Water in India with reference to agriculture and population: some issues and patterns —dynamic approaches needed for development

In this paper an attempt is made to present some facets of status of water for agriculture and population in India. The issues are basic in nature which have been focused by scholars all over time and again. The materials are gathered from various sources to highlight and to consider a plea in the context of population-hydrological regions of the country to develop water potentials. Some characteristic mapping has also been conducted showing the main parameters of water utilization, need and spatial issues regarding consumptive use of water during agricultural operations as per the seasons prevalent in India. A relation is also established with the drought areas leading to assess the need for water. The human problems specially in relation to the safe drinking water is also projected in relation to distributional qualities with reference to natural regions by districts. The study does not claim a full assessment of the water issue due to paucity of statistics on water use, generation and potentials but it does indicate in many ways the geographical problems as an important study for further research by all concerned.     

Crustal structure of the Rhenish Massif: results of deep seismic reflection lines Dekorp 2-North and 2-North-Q

The reflection seismic line DEKORP 2-N reveals an almost complete cross section through the Rhenohercynian Zone, the most external part of the Variscan orogen in Europe.The northern part of DEKORP 2-N and a NE-directed branch (2-N-Q) reveal the Cretaceous of the Münsterland basin and the underlying folded Palaeozoic rocks. The northward decreasing intensity of folding is depicted in great detail by the highly reflective Late Carboniferous coal-measures and deeper reflections down to the level of the Givetian/Frasnian shallow-water carbonates.In the Devonian and older rocks of the Rhenish Massif, bedding is only represented by relatively weak, short and irregular reflections. These are truncated by stronger, southward dipping reflections, which exhibit the listric curvature and flat/ramp geometry characteristic of faults. In the northern part of the section, the thrusts appear to be blind. From the Ebbe Anticline southwards, prominent reflections can be correlated with important thrust faults known from the surface, such as the Ebbe-, Siegen-, Müsen- and Sackpfeife- Thrusts, as well as further important thrust faults in the Lahn- and Dill Synclines. The basal thrust of the extremely thin-skinned Giessen Nappe is only recognizable for a very short distance.At depth, the thrusts flatten out in a relatively transparent zone between 3–5 s TWT, with strongly reflective bands at its bottom and top. The transparent zone might correlate with a high-conductivity layer detected in a magnetotelluric survey; it represents either graphitic metapelites or a zone with an interconnected, brine-filled pore space. The seismic record relates either to lithological differences, or to rheological boundaries.The lower crust in the north is characterized by a relatively transparent zone, which wedges out towards south under the northern margin of the Siegen Anticline. Comparisons with a similar feature in the ECORS profile »Nord de la France« suggest that the transparent zones in both sections correspond to a pre-Palaeozoic basement, such as it underlies the Brabant Massif. Further south, the lower crust is increasingly reflective.The curvilinear, thrust-related reflections are cut by a conjugate set of much weaker, N- and S-dipping reflectors indicating a later deformation with pure shear. Displacement of some marker reflections suggests late- or post-Variscan compression.In an alternative interpretation, these straight and weak reflections represent the only thrust faults, while the curvilinear elements might relate to bedding.A southward rise of the Moho from approx. 11 to 8.5 s TWT is probably due to Tertiary rifting.

---

Zusammenfassung Das reflexionsseismische Profil DEKORP 2-N stellt einen fast vollständigen Querschnitt durch das Rhenohercynikum dar.Der nördliche Teil des Profiles 2-N sowie ein SW/NE-verlaufender Abzweig (2-N-Q) zeigen die Transgression der Münsterländer Kreide und das unterlagernde gefaltete Paläozoikum. Schichtgebundene Reflektoren (flözführendes Karbon, devonischer Massenkalk) bilden das Ausklingen der variscischen Faltung nach NW detailliert ab.In den devonischen und vordevonischen Sedimenten des rechtsrheinischen Schiefergebirges erzeugt die Schichtung nur relativ schwache, kurze und unregelmäßige Reflexionen. Diese werden von stärkeren, südfallenden Reflektoren abgeschnitten, die aufgrund ihrer listrischen Krümmung und flat/ramp-Geometrie wahrscheinlich als Überschiebungen zu interpretieren sind. Im Nordteil des Schiefergebirges sind diese Überschiebungen offenbar blind, werden also nahe der Oberfläche durch Faltung kompensiert. Im Ebbe-Sattel und weiter südlich lassen sich die meisten der starken, südfallenden Reflektoren zweifelsfrei mit bekannten Großüberschiebungen korrelieren (Ebbe-, Siegen-, Müsen-, Sackpfeife-Ü, sowie weitere Überschiebungen in der Lahn- u. Dill-Mulde). Die Basisüberschiebung der Giessen-Decke wird nur teilweise abgebildet.Zur Tiefe hin zeigen die Überschiebungen ein zunehmend flacheres Einfallen, und verschwinden in einer relativ transparenten Zone zwischen 3 und 5 s TWT, die im Hangenden und Liegenden durch dünne, stark reflektive Zonen begrenzt ist. Diese transparente Zone entspricht möglicherweise einer Zone hoher integrierter Leitfähigkeit, die in einem begleitenden magnetotellurischen Experiment nachgewiesen worden ist; es handelt sich entweder um einen Graphit-führenden Phyllit-Horizont oder eine mächtigere permeable Zone mit Elektrolyt-gefülltem Porenraum. Die hochreflektiven Bänder über und unter der transparenten Zone entsprechen entweder lithologischen Kontrasten oder rheologischen Grenzen, die vermutlich von einer scherenden Verformung überprägt worden sind.Die Unterkruste im N-Teil des Profiles enthält einen relativ transparenten Bereich, der nach Süden hin unter dem Nordteil des Siegener Sattels keilförmig ausläuft. Ein ähnliches Bild zeigt der Nordteil des ECORS-Profiles »Nord de la France«. Die transparenten Bereiche beider Profile entsprechen wahrscheinlich einem prä-paläozoischen kristallinen Basement, das das Brabanter Massif unterlagert und sich rechtsrheinisch fortsetzt. Südlich des transparenten Keiles wird die Unterkruste zunehmend reflexionsreicher. Die listrisch gekrümmten, an Überschiebungen gebundenen Reflektoren werden von einem konjugierten System schwächerer, N- u. S-fallender Reflektoren abgeschnitten, die auf eine jüngere, bruchhafte Verformung durch reine Scherung hindeuten. Der Versatz einiger älterer Reflektoren deutet auf spät- oder postvariscische Kompression hin.In einer alternativen Interpretation werden nur diese jüngeren Reflektoren als Überschiebungen gedeutet; die älteren, gekrümmten Elemente müßten dann primären lithologischen Grenzen entsprechen.Die Moho steigt von ca. 11 s TWT im N auf 8.5 s TWT unter dem Taunus an. Die Krustenverdünnung im Süden geht wahrscheinlich auf Dehnung im Tertiär zurück.

---

Résumé Le profil sismique par réflexion DEKORP-2-N représente une transversale quasiment complète à travers la zone rhénohercynienne. La partie septentrionale du DEKORP-2-N ainsi qu'une branche de direction SW-NE (2-N-Q) mettent en évidence la transgression du Crétacé du Münsterland sur le Paléozoïque sous-jacent plissé. Des réflecteurs liés à la stratification (à savoir: le Houiller et les calcaires de plate-forme dévoniens) illustrent de façon détaillée la diminution vers le nord de l'intensité du plissement varisque.Dans les sédiments dévoniens et pré-dévoniens du Massif Rhénan à l'est du Rhin, la stratification ne fournit que que des réflexions relativement faibles, courtes et irrégulières. Elles sont tronquées par des réflecteurs plus intenses, à pendage sud qui, en raison de leur courbure listrique et de leur géométrie en «flat/ramp», doivent être interprétés comme des chevauchements. Dans la partie septentrionale du Massif, ces chevauchements sont apparemment aveugles, c'est-à-dire qu'ils sont compensés, près de la surface, par le plissement. Dans l'anticlinal d'Ebbe, ainsi que plus au sud, la plupart des réflecteurs intenses à plongement sud peuvent être corrélés avec des chevauchements majeurs connus, tels ceux de Ebbe, Siegen, Müsen, Sackpfeife et d'autres encore dans les synclinaux de la Lahn et de la Dill. Le chevauchement basai de la nappe de Giessen n'est que partiellement représenté.Les chevauchements deviennent de plus en plus plats en profondeur pour disparaître dans une zone relativement transparente qui se situe entre 3–5 sec TWT. Celle-ci est prise en sandwich par des zones minces à forte réflectivité. La zone transparente correspond probablement à une zone de conductivité intégrée élevée dont l'existence a par ailleurs été démontrée dans un essai magnétotellurique mené parallèlement. Il s'agit soit d'un horizon phyllitique graphiteux, soit d'une zone perméable plus épaisse dont les pores sont remplis d'électrolyte. Les bandes à haute réflectivité au-dessus et en-dessous de la zone transparente correspondent soit à des contrastes lithologiques, soit à des limites rhéologiques probablement accentuées par la déformation cisaillante.La croûte inférieure dans la partie septentrionale du profil comporte un domaine relativement transparent qui s'amincit vers le S et se termine, en dessous de la partie nord de l'anticlinal de Siegen, en forme de coin. La partie nord du profil ECORS «Nord de la France» montre une image semblable.Les domaines transparents des deux profils correspondent vraisemblablement à un soubassement cristallin pré-paléozoïque qui est sousjacent au Paléozoïque du Massif du Brabant et se prolonge vers l'est au-delà du Rhin. Au sud du coin transparent, la réflectivité de la croûte inférieure va en augmentant. Les réflecteurs listriques liés à des chevauchements sont recoupés par un système conjugué de réflecteurs plus faibles à plongement nord et sud qui indiquent des failles plus récentes. Le déplacement de quelques réflecteurs plus anciens suggère l'effet d'une compression tardiou post-varisque.Dans une interprétation alternative, seuls ces réflecteurs plus récents sont considérés comme correspondant à des chevauchements. Dans ce cas, les éléments courbes plus anciens devraient représenter des limites lithologiques primaires.Le Moho s'élève à partir de 11 sec TWT environ au nord jusqu'à 8.5 sec TWT en-dessous du Taunus. L'amincissement crustal au sud résulterait du régime de distension survenu au Tertiaire.

---

DEKORP 2 Nord. x-t- ray-tracing'a. 6,0 6,6 /, — 7,0 8,2 /. 6,25 /. 28 30 . , .

---

Abbreviations MORB Mid-Ocean Ridge Basalt - TWT two-way travel time, seconds (s) - CMP common mid-point - VP vibration point - SNR signal to noise ratio     

Equatorial disturbances,monsoons, and 1982–1983 ENSO

Summary Interannual modes are described in terms of three-month running mean anomaly winds (u,v), outgoing longwave radiation (OLR), and sea surface temperature (T _* ). Normal atmospheric monsoon circulations are defined by long-term average winds (u _n,v _n) computed every month from January to December. Daily winds are grouped into three frequency bands, i.e., 30–60 day filtered winds (u _L,v _L); 7–20 day filtered winds (u _M,v _M); and 2–6 day filtered winds (u _S,v _S). Three-month running mean anomaly kinetic energy (signified asK _L , K _M , andK _S , respectively) is then introduced as a measure of interannual variation of equatorial disturbance activity. Interestingly, all of theseK _L , K _M , andK _S perturbations propagate slowly eastward with same phase speed (0.3 ms^–1) as ENSO modes. Associated with this eastward propagation is a positive (negative) correlation between interannual disturbance activity (K _L , K _M , K _S ) and interannualu (OLR) modes. Namely, (K _L , K _M , K _S ) becomes more pronounced than usual nearly simultaneously with the arrival of westerlyu and negativeOLR (above normal convection) perturbutions. In these disturbed areas with (K _L , K _M , K _S >0), upper ocean mixing tends to increase, resulting in decreased sea surface temperature, i.e.T _* 0. Thus, groups (not individual) of equatorial disturbances appear to play an important role in determiningT _* variations on interannual time scales. HighestT _* occurs about 3 months prior to the lowestOLR (convection) due primarily to radiational effects. This favors the eastward propagation of ENSO modes. The interannualT _* variations are also controlled by the prevailing monsoonal zonal windsu _n, as well as the zonal advection of sea surface temperature on interannual time scales. Over the central Pacific, all of the above mentioned physical processes contribute to the intensification of eastward propagating ENSO modes. Over the Indian Ocean, on the other hand, some of the physical processes become insignificant, or even compensated for by other processes. This results in less pronounced ENSO modes over the Indian Ocean.With 10 FiguresContribution No. 89-6, Department of Meteorology, University of Hawaii, Honolulu, Hawaii.