Seismic Ground Motion Expected for the Eastern District of Naples

The seismic ground motion of a test area in the eastern district of Naples is computed with a hybrid technique based on the mode summation and the finite difference methods. This technique allows us the realistic modelling of source and propagation effects, including local soil conditions. In the modelling, we consider the 1980 Irpinia earthquake, a good example of strong shaking for the area of Naples, which is located about 90 km from the epicenter.The detailed geological setting is reconstructed from a large number of drillings. The sub-soil is mainly formed by alluvial (ash, stratified sand and peat) and pyroclastic materials overlying a pyroclastic rock (yellow neapolitan tuff), representing the neapolitan bedrock. The detailed information available on mechanical properties of the sub-soil and its geometry warrants the application of the sophisticated hybrid technique.As expected, the sedimentary cover causes an increase of the signal's amplitudes and duration. If thin peat layers are present, the amplification effects are reduced, and the peak ground accelerations are similar to those observed for the bedrock model. This can be explained by the backscattering of wave energy at such layers, that tend to seismically decouple the upper from the lower part of the structure.For SH-waves, the influence of the variations of the S-wave velocities on the spectral amplification is studied, by considering locally measured velocities and values determined from near-by down-hole measurements. The comparison between the computed spectral amplifications confirms the key role of an accurate determination of the seismic velocities of the different layers.The comparison performed between a realistic 2-D seismic response and a standard 1-D response, based on the vertical propagation of waves in a plane layered structure, shows considerable difference, from which it is evident that serious caution must be taken in the modelling of expected ground motion at a specific site.     

Mafic microgranular enclaves from the Xanthi pluton (Northern Greece): An example of mafic-felsic magma interaction

Summary Petrographic, geochemical and isotopic data are reported for the mafic microgranular enclaves occurring in a calc-alkaline Oligocene pluton outcropping near Xanthi town in northern Greece. The intrusion is composed of dominant granodiorites with minor tonalites and quartz diorites. Mafic enclaves occur in large swarms concentrated near the margins of the pluton. They have fine-grained porphyritic textures and contain the same minerals as their granodioritic and tonalitic host rocks (Pl, Qtz, Bt, Hb1, Kfs ± Ap, Zrn, Mt, Spn) but in totally different modal proportions. Chemical compositions range from mafic to intermediate and are characterized by higher abundance of Na₂O) and lower contents of CaO and Sr with respect to an average basaltic magma with a similar SiO₂ content. The initial Sr isotopic ratios, ranging from 0.7061 to 0.7063, are similar to those of the enclosing rocks (0.7062-0.7063). Field evidence, as well as petrographic and geochemical data, suggests that the analyzed enclaves derived from disruption of synplutonic intrusions of cogenetic mafic magma. The Xanthi pluton could represent ascent of a zoned magma body, with a silicic cap (granodiorite, tonalite, quartz diorite) having intruded first followed by the deeper more mafic levels as syn-intrusive dikes.

---

Mafische mikrogranulare Enklaven aus dem Xanthi Pluton, Nord-Griechenland: Ein Beispiel von mafisch-felsischer Magma-Wechselwirkung

Zusammenfassung Petrographische, geochemische und Isotopen-Daten für mafische mikrogranulare Enklaven in einem kalk-alkalischen oligozänen Pluton, der in der Nähe der Stadt Xanthi in Nord-Griechenland aufgeschlossen ist, werden präsentiert. Die Intrusion besteht hauptsächlich aus Granodioriten mit untergeordneten Tonaliten und QuarzDioriten. Mafische Enklaven kommen in großen Schwärmen, besonders an den Rändern des Plutons vor. Sie zeigen feinkörnige prophyritische Texturen und enthalten diesselben Minerale wie ihre granodioritischen und tonalitischen Wirtsgesteine (P1, Qtz, Bt, Hb1, Kfs ± Zrn, Mt, Spn), aber in vollkommen verschiedenen modalen Verhältnissen. Chemische Zusammensetzungen schwanken von mafisch bis intermediär und werden durch höhere Gehalte an Na₂O und niedriger Gehalte von CaO und Sr, verglichen mit durchschnittlichem Basaltmagma mit ähnlichem SiO₂-Gehalt, gekennzeichnet. Die Strontium-Initiale schwanken von 0,7061 bis 0,7063, und sind denen der umgebenden Gesteine (0,7062-0,7063) ähnlich. Geländebefunde, wie auch petrographische und chemische Daten, zeigen, daß die analysierten Enklaven auf das Aufbrechen von synplutonischen Intrusionen cogenetischen mafischen Magmas zurückgehen. Der XanthiPluton könnte dem Aufstieg eines zonierten Magmenkörpers zuzuordnen sein, mit einem Si-reichen Dach (Granodiorite, Tonalite, Quarzdiorite), das zuerst intrudiert ist, gefolgt von den tiefer angesiedelten, mehr mafischen Gesteinen als syn-intrusive G:ange.

---

---

With 7 Figures     

Argillite debris converted to bauxite during karst weathering: evidence from immobile element geochemistry at the Olmedo Deposit, Sardinia

The Olmedo bauxite deposit occurs in the Nurra district of northwest Sardinia. It forms a stratiform horizon in Cretaceous limestone and marl. Uplift in mid-Cretaceous had exposed recently deposited limestone to karst weathering, and a layer of argillaceous debris accumulated on its surface and was partly converted to bauxite. Intermediate products were desiccated marl, bauxitic argillite and argillaceous bauxite. Subsidence followed, and the bauxite was preserved by the deposition of late Cretaceous limestone and other sediments. Uplift in Oligocene-Miocene time, with ensuing erosion, exposed the bauxite horizon to its present configuration. Concentrations of normative minerals illustrate chemical processes and the build-up of Al in the bauxite horizon. Plots of chemical data and correlation coefficients show that Al, Ti, Zr, Nb, Th, Cr and V were immobile during the bauxitization process. Mass changes point to large net removal of Si, Mg and K from the system, although some of this material and slightly mobile Al were reprecipitated in the underlying argillite and altered marl. Immobile element ratios trace the source of the bauxite to the underlying argillaceous limestone. Al in the bauxite was accumulated from the degradation of 25 to 50 m of the argillaceous limestone. Received: 10 June 1996 / Accepted: 15 April 1997     

Attenuation differences in layer 2A in intermediate- and slow-spreading oceanic crust

In situ seismic attenuationQ⁻¹logs are derived from borehole velocity profiles and reveal sharp boundaries between morphologies of the extrusive volcanic layers in intermediate- and slow-spreading oceanic crust.Q⁻¹logs are calculated from the scattering attenuation associated with vertical velocity heterogeneity in Ocean Drilling Program Holes 504B and 896A and in Hole 395A, located in 5.9–7.3 Ma crust on the Pacific and Atlantic plates, respectively. Our results strongly tie crustal properties to seismic measurables and observed geological structures: we find that the scattering attenuation can be used to identify the extrusive volcanic sequence because it is closely related to changes in the degree of vertical heterogeneity. We interpret a distinct decrease in the Q⁻¹log at the transition below the extrusive volcanic layer to correspond with the seismic layer 2A/2B boundary. The boundary is located at 465 m depth below the sea floor in both Hole 395A and 504B, although this is likely to be a coincidence of the sediment thickness at these sites. Layer 2A is estimated to be approximately 150 m thick in Hole 504B and > 300 m thick in Hole 395A. Cyclic sequences of high-porosity pillows and low-porosity massive units in the uppermost 100 m of volcanics in Hole 395A result in large velocity heterogeneities which cause > 5 times more attenuation in this layer than in Hole 504B. In Hole 896A, by contrast, fewer pillows, more massive flows, and a greater volume of carbonate veins decrease the velocity heterogeneity and attenuation significantly over only 1 km distance from Hole 504B. We conclude that the attenuation in the extrusive volcanics of the ocean crust is largely controlled by variation in local heterogeneity and morphology as well as by subsequent hydrothermal alteration. The observed differences inQ⁻¹profiles and layer 2A thickness at these sites may be attributed to variations in the volume and duration of volcanic activity at mid-ocean spreading centers for these Pacific and Atlantic ridge segments.     

Estimation of groundwater evaporation and salt flux from Owens Lake, California, USA

Groundwater evaporation and subsequent precipitation of soluble salts at Owens Lake in eastern California have created one of the single largest sources of airborne dust in the USA, yet the evaporation and salt flux have not been fully quantified. In this study, we compare eddy correlation, microlysimeters and solute profiling methods to determine their validity and sensitivity in playa environments. These techniques are often used to estimate evaporative losses, yet have not been critically compared at one field site to judge their relative effectiveness and accuracy. Results suggest that eddy correlation methods are the most widely applicable for the variety of conditions found on large playa lakes. Chloride profiling is shown to be highly sensitive to thermal and density-driven fluxes in the near surface and, as a result, appears to underestimate yearly groundwater evaporation. Yearly mean groundwater evaporation from the playa surface estimated from the three study areas was found to range from 88 to 104 mm year⁻¹, whereas mean evaporation from the brine-covered areas was 872 mm year⁻¹. Uncertainties on these mean rates were estimated to be ±25%, based on comparisons between eddy correlation and lysimeter estimates. On a yearly basis, evaporation accounts for approximately 47 × 10⁶ m³ of water loss from the playa surface and open-water areas of the lake. Over the playa area, as much as 7.5 × 10⁸ kg (7.5 × 10⁵ t) of salt are annually concentrated by evaporation at or near the playa surface, much of which appears to be lost during dust storms in area.     

The identifiability of parameters in a water quality model of the Biebrza River, Poland

The identifiability of model parameters of a steady state water quality model of the Biebrza River and the resulting variation in model results was examined by applying the Monte Carlo method which combines calibration, identifiability analysis, uncertainty analysis, and sensitivity analysis. The water quality model simulates the steady state concentration profiles of chloride, phosphate, ammonium, and nitrate as a function of distance along a river. The water quality model with the best combination of parameter values simulates the observed concentrations very well. However, the range of possible modelled concentrations obtained for other more or less equally eligible combinations of parameter values is rather wide. This range in model outcomes reflects possible errors in the model parameters. Discrepancies between the range in model outcomes and the validation data set are only caused by errors in model structure, or (measurement) errors in boundary conditions or input variables. In this sense the validation procedure is a test of model capability, where the effects of calibration errors are filtered out. It is concluded that, despite some slight deviations between model outcome and observations, the model is successful in simulating the spatial pattern of nutrient concentrations in the Biebrza River.     

The separation of the influence of nutrients and climate on the varve time-series of baldeggersee, Switzerland

The varve data-set from a freeze-core taken in the deepest part of Baldeggersee was subjected to different multivariate statistical analyses in order to estimate the amount of variance in the varve thickness measures explicable by past climate and by the trophic state of the lake. A comparison of two different time-periods (1902 to1992 versus 1920 to 1980) revealed that the lake restoration programme since 1982 has had a significant impact on the formation of the seasonal layers. Results of the partitioning of the variance in the varve thickness measures showed that about two thirds of the variance are unexplained by a climate and trophic state model and that trophic state explains 6%, whereas climate accounts for about 28% of the variance before the effect of lake restoration had a strong impact on the varves. Among the climate parameters the amount of annual precipitation is a strong predictor for explaining the thickness of both dark layer and total couplet thickness, whereas summer precipitation is important for the thickness of the light layer.     

Global modelling study (GSM TIP) of the ionospheric effects of excited N2, convection and heat fluxes by comparison with EISCAT and satellite data for 31 July 1990

Near-earth plasma parameters were calculated using a global numerical self-consistent and time-dependent model of the thermosphere, ionosphere and protonosphere (GSM TIP). The model results are compared with experimental data of different origin, mainly EISCAT measurements and simultaneous satellite data (N_e and ion composition). Model runs with varying inputs of auroral FAC distributions, temperature of vibrationally excited nitrogen and photoelectron energy escape fluxes are used to make adjustments to the observations. The satellite data are obtained onboard Active and its subsatellite Magion –2 when they passed nearby the EISCAT station around 0325 and 1540 UT on 31 July 1990 at a height of about 2000 and 2200 km, respectively. A strong geomagnetic disturbance was observed two days before the period under study. Numerical calculations were performed with consideration of vibrationally excited nitrogen molecules for high solar-activity conditions. The results show good agreement between the incoherent-scatter radar measurements (N_e, T_e, T_i) and model calculations, taking into account the excited molecular nitrogen reaction rates. The comparison of model results of the thermospheric neutral wind shows finally a good agreement with the HWM93 empirical wind model.