Variability of Extended Bipolar Regions

Using NSO/Kitt Peak synoptic charts from 1975 to 2003, we group the main solar magnetic fields into two categories: one for active regions (ARs) and the other for extended bipolar regions (EBRs). Comparing them, we find that there exist three typical characteristics in the variability of EBRs: First, there exists a correlation between ARs and EBRs. The phase of EBR flux has a delay nearly two CRs. Second, we find that the EBR flux has two prominent periods at 1.79 years and 3.21 years. The 1.79-year period seems to only belong to large-scale magnetic features. Lastly, the North – South asymmetry of EBR flux is not very significant on a time scale of one solar cycle. However, during solar maxima, its dominance is found to shift from one hemisphere to the other.     

Study of Ribbon Separation and Magnetic Reconnection Rates in a Two-Ribbon Flare

In this paper, we present a study of the correlation between the speed of flare ribbon separation and the magnetic flux density during the 10 April 2001 solar flare. The study includes the section of the neutral line containing the flare core and its peripheral area. This event shows clear two-ribbon structure and inhomogeneous magnetic fields along the ribbons, so the spatial correlation and distribution of the flare and magnetic parameters can be studied. A weak negative correlation is found between the ribbon separation speed (V _r) and the longitudinal magnetic flux density (B _z ). This correlation is the weakest around the peak of the flare. Spatially, the correlation is also weakest at the positions of the hard X-ray (HXR) sources. In addition, we estimate the magnetic reconnection rate (electric field strength in the reconnection region E _rec) by combining the speed of flare ribbons and the longitudinal magnetic flux density. During flare evolution, the time profiles of the magnetic reconnection rate are similar to that of the ribbon separation speed, and the speeds of ribbon separation are relatively slow in the strong magnetic fields (i.e., V _r is negatively correlated with B _z ). However, along the flare ribbons, E _rec fluctuates in a small range except near the HXR source. A localized enhancement of the reconnection rate corresponds to the position of the HXR source.     

The DynaMICCS perspective

The DynaMICCS mission is designed to probe and understand the dynamics of crucial regions of the Sun that determine solar variability, including the previously unexplored inner core, the radiative/convective zone interface layers, the photosphere/chromosphere layers and the low corona. The mission delivers data and knowledge that no other known mission provides for understanding space weather and space climate and for advancing stellar physics (internal dynamics) and fundamental physics (neutrino properties, atomic physics, gravitational moments...). The science objectives are achieved using Doppler and magnetic measurements of the solar surface, helioseismic and coronographic measurements, solar irradiance at different wavelengths and in-situ measurements of plasma/energetic particles/magnetic fields. The DynaMICCS payload uses an original concept studied by Thalès Alenia Space in the framework of the CNES call for formation flying missions: an external occultation of the solar light is obtained by putting an occulter spacecraft 150 m (or more) in front of a second spacecraft. The occulter spacecraft, a LEO platform of the mini sat class, e.g. PROTEUS, type carries the helioseismic and irradiance instruments and the formation flying technologies. The latter spacecraft of the same type carries a visible and infrared coronagraph for a unique observation of the solar corona and instrumentation for the study of the solar wind and imagers. This mission must guarantee long (one 11-year solar cycle) and continuous observations (duty cycle > 94%) of signals that can be very weak (the gravity mode detection supposes the measurement of velocity smaller than 1 mm/s). This assumes no interruption in observation and very stable thermal conditions. The preferred orbit therefore is the L1 orbit, which fits these requirements very well and is also an attractive environment for the spacecraft due to its low radiation and low perturbation (solar pressure) environment. This mission is secured by instrumental R and D activities during the present and coming years. Some prototypes of different instruments are already built (GOLFNG, SDM) and the performances will be checked before launch on the ground or in space through planned missions of CNES and PROBA ESA missions (PICARD, LYRA, maybe ASPIICS).     

The Number of Magnetic Null Points in the Quiet Sun Corona

The coronal magnetic field above a particular photospheric region will vanish at a certain number of points, called null points. These points can be found directly in a potential field extrapolation or their density can be estimated from the Fourier spectrum of the magnetogram. The spectral estimate, in which the extrapolated field is assumed to be random and homogeneous with Gaussian statistics, is found here to be relatively accurate for quiet Sun magnetograms from SOHO’s MDI. The majority of null points occur at low altitudes, and their distribution is dictated by high wavenumbers in the Fourier spectrum. This portion of the spectrum is affected by Poisson noise, and as many as five-sixths of null points identified from a direct extrapolation can be attributed to noise. The null distribution above 1500 km is found to depend on wavelengths that are reliably measured by MDI in either its low-resolution or high-resolution mode. After correcting the spectrum to remove white noise and compensate for the modulation transfer function we find that a potential field extrapolation contains, on average, one magnetic null point, with altitude greater than 1.5 Mm, above every 322 Mm² patch of quiet Sun. Analysis of 562 quiet Sun magnetograms spanning the two latest solar minima shows that the null point density is relatively constant with roughly 10% day-to-day variation. At heights above 1.5 Mm, the null point density decreases approximately as the inverse cube of height. The photospheric field in the quiet Sun is well approximated as that from discrete elements with mean flux 〈|φ|〉=1.0×10¹⁹ Mx distributed randomly with density n=0.007 Mm⁻².     

Baily’s Beads Atlas in 2005 – 2008 Eclipses

In the annular or total eclipses of 3 October 2005, 29 March 2006, 22 September 2006, and 1 August 2008, observational campaigns were organized to record the phenomenon of Baily’s beads. These campaigns were internationally coordinated through the International Occultation Timing Association (IOTA) at both its American and European sections. From the stations in the northern and southern zones of grazing eclipse, the eclipses have been recorded on video. Afterward, as many beads as possible have been identified by analyzing the video data of each observing station. The atlas presented in this paper includes 598 data points, obtained by 23 observers operating at 28 different observing stations. The atlas lists the geographic positions of the observing stations and the observed time instants of disappearance or reappearance of beads, identified by an angle measured relative to the Moon’s axis of rotation. The atlas will serve as a basis for determining the solar diameter. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.     

Time-dependent simulations of steady C-type shocks

Using a time-dependent multifluid, magnetohydrodynamic code, we calculated the structure of steady perpendicular and oblique C-type shocks in dusty plasmas. We included relevant processes to describe mass transfer between the different fluids, radiative cooling by emission lines and grain charging, and studied the effect of single- and multiple-sized grains on the shock structure. Our models are the first of oblique fast-mode molecular shocks in which such a rigorous treatment of the dust grain dynamics has been combined with a self-consistent calculation of the thermal and ionization structures including appropriate microphysics. At low densities, the grains do not play any significant rôle in the shock dynamics. At high densities, the ionization fraction is sufficiently low that dust grains are important charge and current carriers and, thus, determine the shock structure. We find that the magnetic field in the shock front has a significant rotation out of the initial upstream plane. This is most pronounced for single-sized grains and small angles of the shock normal with the magnetic field. Our results are similar to previous studies of steady C-type shocks showing that our method is efficient, rigorous and robust. Unlike the method employed in the previous most detailed treatment of dust in steady oblique fast-mode shocks, ours allow a reliable calculation even when chemical or other conditions deviate from local statistical equilibrium. We are also able to model transient phenomena.     

Structural evolution of the 40 km wide Araguainha impact structure,central Brazil

Abstract— The 40 km wide Araguainha structure in central Brazil is a shallowly eroded impact crater that presents unique insights into the final stages of complex crater formation. The dominant structural features preserved at Araguainha relate directly to the centripetal movement of the target rocks during the collapse of the transient cavity. Slumping of the transient cavity walls resulted in inward‐verging inclined folds and a km‐scale anticline in the outer ring of the structure. The folding stage was followed by radial and concentric faulting, with downward displacement of kilometer‐scale blocks around the crater rim. The central uplift records evidence for km‐scale upward movement of crystalline basement rocks from the transient cavity floor, and lateral moment of sedimentary target rocks detached from the cavity walls. Much of the structural grain in the central uplift relates to structural stacking of km‐scale thrust sheets of sedimentary strata onto the core of crystalline basement rocks. Outward‐plunging radial folds indicate tangential oblate shortening of the strata during the imbrication of the thrust sheets. Each individual sheet records an early stage of folding and thickening due to non‐coaxial strains, shortly before sheet imbrication. We attribute this folding and thickening phase to the kilometer‐scale inward movement of the target strata from the transient cavity walls to the central uplift. The outer parts of the central uplift record additional outward movement of the target rocks, possibly related to the collapse of the central uplift. An inner ring structure at 10–12 km from the crater center marks the extent of the deformation related to the outward movement of the target rocks.     

A modified peak‐bagging technique for fitting low‐𝓁 solar p‐modes

We introduce a modified version of a standard power spectrum ‘peak‐bagging’ technique which is designed to gain some of the advantages that fitting the entire low‐degree p‐mode power spectrum simultaneously would bring, but without the problems involved in fitting a model incorporating many hundreds of parameters. Employing Monte‐Carlo simulations we show that by using this modified fitting code it is possible to determine the true background level in the vicinity of the p‐mode peaks. In addition to this we show how small biases in other mode parameters, which are related to inaccurate estimates of the true background, are also consequently removed. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The visibility of low‐frequency solar acoustic modes

We make predictions of the detectability of low‐frequency p modes. Estimates of the powers and damping times of these low‐frequency modes are found by extrapolating the observed powers and widths of higher‐frequency modes with large observed signal‐to‐noise ratios. The extrapolations predict that the low‐frequency modes will have small signal‐to‐noise ratios and narrow widths in a frequency‐power spectrum. Monte Carlo simulations were then performed where timeseries containing mode signals and normally distributed Gaussian noise were produced. The mode signals were simulated to have the powers and damping times predicted by the extrapolations. Various statistical tests were then performed on the frequency‐amplitude spectra formed from these timeseries to investigate the fraction of spectra in which the modes could be detected. The results of these simulations were then compared to the number of p‐modes candidates observed in real Sun‐as‐a‐star data at low frequencies. The fraction of simulated spectra in which modes were detected decreases rapidly as the frequency of modes decreases and so the fraction of simulations in which the low‐frequency modes were detected was very small. However, increasing the signal‐to‐noise (S/N) ratio of the low‐frequency modes by a factor of 2 above the extrapolated values led to significantly more detections. Therefore efforts should continue to further improve the quality of solar data that is currently available. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)