March 1990 Hailstorm Damage in Sydney,Australia

On 18 March 1990, an intense hailstorm in Sydney, New South Wales, Australia caused insured damage valued at A$million – the third most expensive loss event in Australian insurance history.While damage was widespread with claims for buildings spread across more than 130 postcodes, 20% of the claims came from just two postcodes. The proportion of dwellings of brick construction that made a claim was significantly less than the proportion of policies for this type of construction. Fibro (fibre-cement), timber and aluminium-clad dwellings are more likely to sustain damage than brick buildings in this type of storm.Hail caused the majority of damage to exterior building items while water damage more commonly affected interior building items and contents. While the repair of Interior building items such as ceilings and walls cost more than contents damage on average, the repair/replacement costs of contents contributed more to the total costs. Damage to window glass and roofs together made up more than 50% of the total claim.     

Study of sporadic-E clouds by backscatter radar

It is shown that swept-frequency backscatter ionograms covering a range of azimuths can be used to study the dynamics of sporadic-E clouds. A simple technique based on analytic ray tracing can be used to simulate the observed narrow traces associated with E_s patches. This enables the location and extent of the sporadic-E clouds to be determined. The motion of clouds can then be determined from a time sequence of records. In order to demonstrate the method, results are presented from an initial study of 5 days of backscatter ionograms from the Jindalee Stage B data base obtained during March-April 1990. Usually 2–3 clouds were observed each day, mainly during the evening and up to midnight. The clouds lasted from 1–4 h and extended between 30°–80° in azimuth and 150–800 km in range. The clouds were mostly stationary or drifted generally westward with velocities of up to 80 ms^–1. Only one cloud was observed moving eastward.     

Arrays of Unpumped Wells for Plume Migration Control by Semi-Passive In Situ Remediation

Arrays of unpumped wells can be used as discontinuous permeable walls in which each well serves both as a means to focus ground water flow into the well for treatment and as a container either for permeable reactive media which directly destroy dissolved ground water contaminants or for devices or materials which release amendments that support in situ degradation of contaminants within the aquifer downgradient of the wells. This paper addresses the use of wells for amendment delivery, recognizing the potential utility of amendments such as electron acceptors (e.g., oxygen nitrate), electron donors (primary substrates), and microbial nutrients for stimulating bioremediation, and the potential utility of oxidizers, reducers, etc., for controlled abiotic degradation. Depending on its rate and constraints, the remedial reaction may occur within the well and/or downgradient. For complete remediation of ground water passing through the well array, the total flux of amendment released must meet or exceed the total flux demand imposed by the plume. When there are constraints on the released concentration of amendment (relative to the demand), close spacing of the wells may be required. If the flux balance allows wider spacing, it is likely that limited downgradient spreading of the released amendment will then be the primary constraint on interwell spacing. Divergent flow from the wells, roughly two times the well diameter, provides the bulk of downgradient spreading and constrains maximum well spacing in the absence of significant lateral dispersion. Stronger lateral dispersion enhances the spreading of amendment, thereby increasing the lateral impact of each well, which allows for wider well spacing.     

Cold anticyclonic eddies formed from cold pool water in the southern Middle Atlantic Bight

AVHRR satellite imagery of the southern Mid-Atlantic Bight during May 1993 revealed a large area of cold water over the shelf break and slope that appeared to spin up into a series of southward propagating anticyclonic eddies. The eddies had diameters of 35–45 km at the surface and moved southward at about 20 cm/sec. A radial TOYO CTD (to 50m) and ADCP velocity (to 400m) transect was conducted across the southern-most of these eddies. The upper 50 meters had minimum temperatures of less than 7°C and salinities of about 33 pss, characteristics similar to cold pool waters usually found over the continental shelf. ADCP velocity data from one of the eddies revealed anticyclonic flow extending to a depth of about 250m. The transport of cold pool water by the eddies was estimated to be 0.1 to 0.2 Sv which is of the same order as the annual mean alongshore transport of shelf water in this region. The origin of the deeper water within the eddy is unlikely to be the continental shelf because the shelf break is less than 100 m. The depth and velocity profiles along the TOYO transect were consistent with the constant potential vorticity eddy model of Flierl (1979) although the source of the eddy kinetic energy is uncertain. The cause for the exodus of cold pool water from the shelf, which extended northward to at least 38°N, is unclear but must involve the establishment of an alongshore baroclinic pressure gradient against the usual southwestward shelf flow. It is possible that the intrusion of Gulf Stream waters onto the shelf near Cape Hatteras was a precursor of this off shelf transport. The southern-most eddy was marked by high biological productivity and very high oxygen supersaturation. The phytoplankton bloom detected within the exported cold pool water, located over the continental slope, suggests a mechanism whereby production fueled by nutrients derived from the shelf can be locally exported into deep water.     

On the Incorporation of the Effect of Crustal Structure into Empirical Strong Ground Motion Estimation

This article has two purposes. Firstly, a validation exercise of the modal summation technique for the computation of synthetic strong-motion records is performed for two regions of Europe (Umbria-Marche and south Iceland), using a variety of region specific crustal structure models, by comparing the predicted ground motion amplitudes with observed motions. It is found that the rate of decay of ground motions is well predicted by the theoretical decay curves but that the absolute size of the ground motions is underpredicted by the synthetic time-histories. This is thought to be due to the presence of low-velocity surface layers that amplify the ground motions but are not included in the crustal structure models used to compute the synthetic time-histories. Secondly, a new distance metric based on the computed theoretical decay curves is introduced which should have the ability to model the complex decay of strong ground motions. The ability of this new distance metric to reduce the associated scatter in empirically derived equations for the estimation of strong ground motions is tested. It is found that it does not lead to a reduction in the scatter but this is thought to be due to the use of crustal structure models that are not accurate or detailed enough for the regions studied. This revised version was published online in July 2006 with corrections to the Cover Date.     

Oxygen isotopic compositions of IVA iron meteorites: implications for the thermal evolution derived from in situ ultraviolet laser microprobe analyses

Oxygen isotopic compositions of silicate inclusions in IVA iron meteorites have been measured with an in situ UV laser microprobe technique. The homogeneity of oxygen isotopic compositions within and among individual mineral grains has also been examined. Oxygen isotope fractionations between coexisting mineral pairs were utilized in oxygen isotope thermometry. Our measured Δ¹⁷O values, ranging from 0.97 to 1.25‰, are characteristic of a single reservoir and fully confirm the oxygen isotopic similarity between IVA irons and L/LL chondrites. Steinbach and São João Nepomuceno, containing inclusions of two silicate minerals in mutual contact, exhibit a mass-dependent fractionation of ¹⁸O/¹⁶O between tridymite and bronzite with apparent oxygen isotopic heterogeneity. The SiO₂-bearing member, Gibeon, gives homogeneous oxygen isotopic compositions without detectable fractionation of ¹⁸O/¹⁶O between tridymite and quartz. Oxygen isotope equilibrium temperatures are estimated for coexisting tridymite and bronzite in the same sample slabs or clusters in Steinbach and São João Nepomuceno. The fractionations of ¹⁸O/¹⁶O between bronzite and tridymite range from 1.6 to 2.3‰ in different sample slabs or clusters. On the basis of the closure temperature concept, cooling rates are estimated at approximately 20 to 1000°C/Myr between 800 and 1000°C, a range of temperatures not accessible to other cooling rate methods. Using the Fast Grain Boundary diffusion model, we have demonstrated that significant oxygen heterogeneity both in tridymite and bronzite is probably due to isotope exchange during cooling between minerals with various grain sizes and mineral abundances in different regions of the samples. The new estimates of cooling rate by oxygen isotope thermometry refine previous cooling curves of IVA irons and support the breakup-reassembly model for the IVA parent body.     

Rainfall thresholds for landsliding in the Himalayas of Nepal

Landsliding of the hillslope regolith is an important source of sediment to the fluvial network in the unglaciated portions of the Himalayas of Nepal. These landslides can produce abrupt increases of up to three orders of magnitude in the fluvial sediment load in less than a day. An analysis of 3 years of daily sediment load and daily rainfall data defines a relationship between monsoonal rainfall and the triggering of landslides in the Annapurna region of Nepal. Two distinct rainfall thresholds, a seasonal accumulation and a daily total, must be overcome before landslides are initiated. To explore the geomorphological controls on these thresholds, we develop a slope stability model, driven by daily rainfall data, which accounts for changes in regolith moisture. The pattern of rainfall thresholds predicted by the model is similar to the field data, including the decrease in the daily rainfall threshold as the seasonal rainfall accumulation increases. Results from the model suggest that, for a given hillslope, regolith thickness determines the seasonal rainfall necessary for failure, whereas slope angle controls the daily rainfall required for failure.     

Construction of detrital mineral populations: insights from mixing of U–Pb zircon ages in Himalayan rivers

Fission‐track, U–Pb and Pb–Pb analyses of detrital heavy mineral populations in depositional basins and modern river sediments are widely used to infer the exhumational history of mountain belts. However, relatively few studies address the underlying assumption that detrital mineral populations provide an accurate representation of their entire source region. Implicit in this assumption is the idea that all units have equal potential to contribute heavy minerals in proportion to their exposure area in the source region. In reality, the detrital mineral population may be biased by variable concentrations of minerals in bedrock and differential erosion rates within the source region. This study evaluates the relative importance of these two variables by using mixing of U–Pb zircon ages to trace zircon populations from source units, through the fluvial system, and into the foreland. The first part of the study focuses on the Marsyandi drainage in central Nepal, using tributaries that drain single formations to define the U–Pb age distributions of individual units and using trunk river samples to evaluate the relative contributions from each lithology. Observed mixing proportions are compared with proportions predicted by a simple model incorporating lithologic exposure area and zircon concentration. The relative erosion rates that account for the discrepancy between the observed and predicted mixing proportions are then modelled and compared with independent erosional proxies. The study also compares U–Pb age distributions from four adjacent drainages spanning ～250 km along the Himalayan front using the Kolmogorov–Smirnov statistic and statistical estimates of the proportion of zircon derived from each upstream lithology. Results show that, along this broad swath of rugged mountains, the U–Pb age distributions are remarkably similar, thereby allowing data from more localized sources to be extrapolated along strike.