The international at-sea intercomparison of fCO2 systems during the R/V Meteor Cruise 36/1 in the North Atlantic Ocean

The ‘International Intercomparison Exercise of fCO₂ Systems’ was carried out in 1996 during the R/V Meteor Cruise 36/1 from Bermuda/UK to Gran Canaria/Spain. Nine groups from six countries (Australia, Denmark, France, Germany, Japan, USA) participated in this exercise, bringing together 15 participants with seven underway fugacity of carbon dioxide (fCO₂) systems, one discrete fCO₂ system, and two underway pH systems, as well as systems for discrete measurement of total alkalinity and total dissolved inorganic carbon. Here, we compare surface seawater fCO₂ measured synchronously by all participating instruments. A common infrastructure (seawater and calibration gas supply), different quality checks (performance of calibration procedures for CO₂, temperature measurements) and a common procedure for calculation of final fCO₂ were provided to reduce the largest possible amount of controllable sources of error. The results show that under such conditions underway measurements of the fCO₂ in surface seawater and overlying air can be made to a high degree of agreement (±1 μatm) with a variety of possible equilibrator and system designs. Also, discrete fCO₂ measurements can be made in good agreement (±3 μatm) with underway fCO₂ data sets. However, even well-designed systems, which are operated without any obvious sign of malfunction, can show significant differences of the order of 10 μatm. Based on our results, no “best choice” for the type of the equilibrator nor specifics on its dimensions and flow rates of seawater and air can be made in regard to the achievable accuracy of the fCO₂ system. Measurements of equilibrator temperature do not seem to be made with the required accuracy resulting in significant errors in fCO₂ results. Calculation of fCO₂ from high-quality total dissolved inorganic carbon (C_T) and total alkalinity (A_T) measurements does not yield results comparable in accuracy and precision to fCO₂ measurements.     

Submersible mountedin situ geotechnical instrumentation

A series of new miniaturizedin situ geotechnical instruments were developed and subsequently field tested with the Deep Sea Research Vessel (DSRV)Alvin during October of 1980 in various sedimentary features on the U.S. East Coast continental slope and upper rise within the Wilmington Geotechnical Corridor. These instruments are herein described and include a cone penetrometer, resistivity/conductivity probe, miniature piezometer, an inclinometer and a small diameter coring system. The various drive systems, controls and data recording systems are also briefly discussed.     

Manganese accumulation by the antennule of the Norway lobster Nephrops norvegicus (L.) as a biomarker of hypoxic events

In laboratory tests, manganese accumulation by the appendages of the sediment burrowing Norway lobster. Nephrops norvegicus (L.) (including the lateral antennules) was approximately three times greater [600 microg Mn g(-1) (dry weight) after 5 days in 20 mg Mn l(-1)] than that by the carapace. The accumulation was linearly dose-dependent (10-40 mg Mn l(-1)) and duration-dependent (2-30 days). and showed no decrease after 3 weeks in undosed seawater. A high manganese uptakc to the lateral antennules during hypoxia in the field was verified from the SE Kattegat, Sweden. These results indicate that accumulation of Mn on the mobile appendages of the Norway lobster fulfils most of the criteria for a biomarker of exposure to hypoxia. Using these measurements in conjunction with Mn concentrations in the internal tissues, it may be possible to resolve both the timing and the extent of the Mn exposure and the underlying hypoxic event.     

Variations in the type and distribution of organic matter in some Carboniferous sediments from northern England

The organic content of a number of sediments from the Carboniferous of northern England have been examined as a function of their depositional environment. Extraction of the sediments yielded the soluble organic matter whilst microscopic examination of polished blocks of shales enabled the detection of particles of organic detritus. A relationship between the amount of extract and the quantity of terrestrial plant material in the sediments has been established. However, the yield of extract (mg/g org. C) is higher in the more marine environment than the nonmarine environment. The proportion of saturated hydrocarbons in the extract appears to be related to the amount of identifiable organic matter (coal macerals) in the sediment. The n-alkane distribution patterns have been compared with these obtained from coal macerals. The suggestion that the pristane to phytane ratios may reflect the source material of the organic matter has been examined.     

Experiments in reconstructing twentieth-century sea levels

One approach to reconstructing historical sea level from the relatively sparse tide-gauge network is to employ Empirical Orthogonal Functions (EOFs) as interpolatory spatial basis functions. The EOFs are determined from independent global data, generally sea-surface heights from either satellite altimetry or a numerical ocean model. The problem is revisited here for sea level since 1900. A new approach to handling the tide-gauge datum problem by direct solution offers possible advantages over the method of integrating sea-level differences, with the potential of eventually adjusting datums into the global terrestrial reference frame. The resulting time series of global mean sea levels appears fairly insensitive to the adopted set of EOFs. In contrast, charts of regional sea level anomalies and trends are very sensitive to the adopted set of EOFs, especially for the sparser network of gauges in the early 20th century. The reconstructions appear especially suspect before 1950 in the tropical Pacific. While this limits some applications of the sea-level reconstructions, the sensitivity does appear adequately captured by formal uncertainties. All our solutions show regional trends over the past five decades to be fairly uniform throughout the global ocean, in contrast to trends observed over the shorter altimeter era. Consistent with several previous estimates, the global sea-level rise since 1900 is 1.70 ± 0.26 mm yr⁻¹. The global trend since 1995 exceeds 3 mm yr⁻¹ which is consistent with altimeter measurements, but this large trend was possibly also reached between 1935 and 1950.     

State‐of‐the‐art sea level and meteorological monitoring systems in the intra‐Americas sea

State‐of‐the‐art technology is presently being used for the acquisition of water level and meteorological data in the Intra‐Americas Sea to support the Global Sea Level Observing System (GLOSS) network of sea‐level monitoring stations. GLOSS stations provide data for the investigation of regional relative sea level change in areas of complex tectonic motion, national geodetic vertical datums, near real‐time data for input to climatic diagnostic numerical models, calibration of satellite altimeter and scatterometer data, and the evaluation of the feasibility of producing synoptic mean sea level charts for the prediction of climatic trends, long‐range weather forecasts, and ocean processes.     

Field Placement and Evaluation of Stabilized Dredged Material (SDM) from the New York/New Jersey Harbor

Since the 1997 local ban on ocean dumping of dredged sediments, the States of New York and New Jersey have pursued a policy of environmentally sound solutions to the management of dredged material, including beneficial use of stabilized dredged material (SDM) in transportation applications. A pilot study was initiated in 1998 to evaluate the use of SDM in the construction of highway embankments. Utilizing 80,000 cubic yards of dredged material, two embankments were constructed from SDM on a commercial development area adjacent to the Harbor. Geotechnical properties and handling of SDM were evaluated both during and one year post ? construction. This article presents the evaluation of the embankments themselves, including constructability and performance. The results demonstrate that SDM satisfies most of the geotechnical criteria for fill construction, except those for durability, requiring proper coverage and protection similar to that provided for fills constructed on cohesive soils. This same characteristic precludes long term stockpiling of SDM prior to final placement, limiting applications to those that have schedules overlapping with dredging projects. Increased costs for the use of SDM can be as high as $8 per cubic yard over traditional fills; however, this cost may be recouped through management fees collected from dredging projects.     

A Portable Matched-Field Processing System Using Passive Acoustic Time Synchronization

A portable matched-field processing (MFP) system for tracking marine mammals is presented, constructed by attaching a set of autonomous flash-memory acoustic recorders to a rope to form a four-element vertical array, or "insta-array." The acoustic data are initially time-synchronized by performing a matched-field global inversion using acoustic data from an opportunistic source, and then by exploiting the spatial coherence of the ocean ambient noise background to measure and correct for the relative clock drift between the autonomous recorders. The technique is illustrated by using humpback whale song collected off the eastern Australian coast to synchronize the array, which is then used to track the dive profile of the whale using MFP methods. The ability to deploy autonomous instruments into arbitrary "insta-array" geometries with conventional fishing gear may permit nonintrusive array measurements in regions currently too isolated, expensive, or environmentally hostile for standard acoustic equipment