The study of fluorescence characteristics and biochemical composition of a marine diatom Thalassiosira pseudonana 3H in light and dark cycles Ⅰ. The effects of nutrients

The effects of nutrients on the fluorescence characteristics and biochemical composition of marine diatom Thalassiosira pseudonana 3H in light and dark cycles were investigated with continuous culture. The results show that with the increase of nutrient deficiency, the ratio of enhanced fluorescence to fluorescence (Fd/F), cellular chloropyll-a and protein content of the algae decline, but the fluorescence yield (F/Chl), DCMU enhanced fluorescence yield (Fd/Chl), cellular carbohydrate content, carbohydrate/Chl, protein/Chl, carbohydrate/protein increase. The changing amplitude of each parameter is different at different nutrition status, sampling time and different light intensity.     

Vadose Zone Monitoring: Experiences and Trends in the United States

The vadose zone is the portion of the geologic profile above a perennial aquifer. Inclusion of mandatory vadose zone monitoring techniques as an approach to aquifer protect ion was first proposed under the Resource Conservation and Recovery Act in the United States in 1978 and has since received increasing acceptance at federal and stale levels. The goals of a vadose zone characterization and monitoring effort are to establish background conditions, identify contaminant transport pathways, identify the extent and degree of existing contamination, establish the basis for monitoring network design, measure the parameters needed in a risk assessment, and provide detection of contaminant migration toward ground water resources. The benefits of vadose zone monitoring include early warning of contaminant migration, potential reduction of ground water monitoring efforts, reduction of contaminant spreading and volume, and reduced time and cost of remediation once a contaminant release occurs. Vadose zone characterization and monitoring techniques should be considered as critical hydrologic tools in the prevention of ground water resource degradation.     

Ecological implications of possible enteropneust faecal casts in tertiary deposits near castlepoint,New Zealand

Unusual “spiral” faecal casts from mid‐Tertiary beds of the Castlepoint area of North Island, New Zealand, are described and compared with modern enteropneust casts photographed at abyssal depths in the south‐west Pacific. Evidence suggests that the fossil casts originated in relatively shallow depths, and this discrepancy emphasises the caution required in the use of trace fossils for palaeoecological interpretations.     

Oil persistence on beaches in Prince William Sound - a review of SCAT surveys conducted from 1989 to 2002

In 2002, 13 years after the Exxon Valdez oil spill (EVOS), 39 selected sites in Prince William Sound (PWS) were re-surveyed following established shoreline cleanup assessment team (SCAT) field observation procedures to document surface and sub-surface oiling conditions in shoreline sediments and to compare results with those from previous Shoreline Cleanup Assessment Team (SCAT) surveys and other surveys in PWS. The selected sites are locations where EVOS oil persisted in 1992, at the time the Federal and State On-Scene Coordinators determined that the cleanup was complete and that further cleanup activities would provide no net environmental benefit. These sites had been included in a 2001 NOAA survey of shoreline oiling conditions and account for 88% of the sub-surface oil residues (SSO) oil documented by that study. The 2002 field survey found isolated occurrences of residual EVOS surface oil residues (SO) in the form of weathered asphalt pavement at 15 of the 39 sites. This residual SO typically consisted of asphalt in mixed sand/gravel substrate, located within a wave shadow effect created by boulders or bedrock in the upper intertidal to supratidal zone. Residual SO, expressed as a continuous oil cover, was less than 200 m(2) within the approximately 111,120 m(2) surveyed. A total of 1182 pits were dug at locations where SSO residues were present in 1992. Six of the 39 sites and 815 (68%) of the pits contained no residual SSO. Eighty-three percent of pits with SSO residues were found primarily in middle to upper intertidal locations. SSO residues commonly occurred in a discontinuous approximately 3 cm thick band 5-10 cm below the boulder/cobble or pebble/gravel veneer. The SO and SSO occurrences in the 2002 survey closely match the locations where they were found in 1992 and earlier surveys; however, in 2002 residual SSO patches are more discontinuous and thinner than they were in the earlier surveys. These sites are biased toward SSO persistence; those that have SSO residues represent less than 0.5% of the originally oiled shorelines in PWS. Despite evidence of continued oil weathering, both at the surface and in the sub-surface, it is clear that the natural cleaning processes at these particular locations are slow. The slow weathering rates are a consequence of the oil residue being incorporated in finer sediments (fine sand, silt, mix) and isolated from active weathering processes as boulders and outcrops, shallow bedrock asperities, or boulder-armoring create wave shadows and limit effective physical action on shorelines.     

Seasonal Forecasts of the Summer 2016 Yangtze River Basin Rainfall

The Yangtze River has been subject to heavy flooding throughout history,and in recent times severe floods such as those in 1998 have resulted in heavy loss of life and livelihoods.Dams along the river help to manage flood waters,and are important sources of electricity for the region.Being able to forecast high-impact events at long lead times therefore has enormous potential benefit.Recent improvements in seasonal forecasting mean that dynamical climate models can start to be used directly for operational services.The teleconnection from El Ni ?no to Yangtze River basin rainfall meant that the strong El Ni ?no in winter 2015/16 provided a valuable opportunity to test the application of a dynamical forecast system.This paper therefore presents a case study of a real-time seasonal forecast for the Yangtze River basin,building on previous work demonstrating the retrospective skill of such a forecast.A simple forecasting methodology is presented,in which the forecast probabilities are derived from the historical relationship between hindcast and observations.Its performance for2016 is discussed.The heavy rainfall in the May–June–July period was correctly forecast well in advance.August saw anomalously low rainfall,and the forecasts for the June–July–August period correctly showed closer to average levels.The forecasts contributed to the confidence of decision-makers across the Yangtze River basin.Trials of climate services such as this help to promote appropriate use of seasonal forecasts,and highlight areas for future improvements.     

Single-Well Injection-Drift Test to Estimate Groundwater Velocity

A simple algebraic equation is presented here to estimate the magnitude of groundwater velocity based on data from a single-well injection-drift test thereby eliminating the time-consuming and costly extraction phase. A volume of tracer-amended water was injected by forced-gradient into a single well followed by monitoring of the conservative solute tracers under natural-gradient conditions as their upgradient portions drifted back through the well. The breakthrough curve data from the single well during the drift phase was analyzed to determine the mean travel times of the tracers. The estimated mean upgradient travel distance back through the single well and the mean travel times of the tracers were used in a simple algebraic equation to estimate groundwater velocity. The groundwater velocity based on the single-well injection-drift test was estimated to be approximately 0.64 ft per day. Two transects of observation wells were used to monitor the natural-gradient tracer transport downgradient of the injection well. The one-dimensional, or dual-well, transport of the tracer from the injection well to the nearest downgradient observation well indicated that the groundwater velocity was 0.55 ft per day. The two-dimensional, or multi-well, transport of the center of mass of the tracers indicated that the groundwater velocity was 0.60 ft per day; the dual- and multi-well results were in excellent agreement with those from the single-well and validated the simple algebraic equation. The new single-well method presented here is relatively simple, rapid, and does not require an extraction phase.     

Clast abrasion of a rock shore platform on the Atlantic coast of Ireland

The abrasion of coastal rock platforms by individual or clusters of clasts during transport has not been quantitatively assessed. We present a study which identifies the types of abrasion and quantifies erosion due to the transport of clasts during three storms in February and March 2016. We explore relationships between platform roughness, determined by the fractal dimension (D) of the topographic profiles, geomorphic controls and the type and frequency of abrasion feature observed. Clast transport experiments were undertaken in conjunction with the measurement of wave energy to assess transport dynamics under summer and winter (non‐storm) conditions. Platform abrasion occurred extensively during the storms. We identify two types of clast abrasion trails: simple and complex. In addition, we find two forms of erosion occur on these trails: Scratch marks and Percussion marks. An estimated 13.6 m² of the platform surface was eroded by clast abrasion on simple abrasion trails during the three storms. We attribute approximately two thirds of this to scratch‐type abrasion. The total volume of material removed by abrasion was 67 808 cm³. Despite the larger surface area affected by scratch marks, we find that the volume of material removed through percussion impact was almost seven times greater. We also find that the type and frequency of abrasion features is strongly influenced by the effect of platform morphometry on transport mode, with impact‐type abrasion dominating areas of higher platform roughness. Results of the clast transport experiments indicate that abrasion occurs under non‐storm wave energy conditions with observable geomorphological effects. We suggest that abrasion by clasts is an important component of platform erosion on high energy Atlantic coastlines, particularly over longer timescales, and that the morphogenetic link between the cliff and the platform is important in this context as the sediment supplied by the cliff is used to abrade the platform. © 2018 John Wiley & Sons, Ltd.     

How do Stability Corrections Perform in the Stable Boundary Layer Over Snow?

We assess sensible heat-flux parametrizations in stable conditions over snow surfaces by testing and developing stability correction functions for two alpine and two polar test sites. Five turbulence datasets are analyzed with respect to, (a) the validity of the Monin–Obukhov similarity theory, (b) the model performance of well-established stability corrections, and (c) the development of new univariate and multivariate stability corrections. Using a wide range of stability corrections reveals an overestimation of the turbulent sensible heat flux for high wind speeds and a generally poor performance of all investigated functions for large temperature differences between snow and the atmosphere above (>10 K). Applying the Monin–Obukhov bulk formulation introduces a mean absolute error in the sensible heat flux of \(6\,\hbox {W m}^{-2}\) (compared with heat fluxes calculated directly from eddy covariance). The stability corrections produce an additional error between 1 and \(5\,\hbox {W m}^{-2}\), with the smallest error for published stability corrections found for the Holtslag scheme. We confirm from previous studies that stability corrections need improvements for large temperature differences and wind speeds, where sensible heat fluxes are distinctly overestimated. Under these atmospheric conditions our newly developed stability corrections slightly improve the model performance. However, the differences between stability corrections are typically small when compared to the residual error, which stems from the Monin–Obukhov bulk formulation.     

Vertical seismic profiling using distributed acoustic sensing with scatter-enhanced fibre-optic cable at the Cu–Au New Afton porphyry deposit,British Columbia,Canada

Wireline logs and vertical seismic profile data were acquired in two boreholes intersecting the main mineralized zone at the Cu–Au New Afton porphyry deposit, Canada, with the objectives of imaging lithological contacts, fault zones that may have acted as conduits that channelled the mineralization, and alteration zones. Log data provide physical rock properties for the main lithologies and alteration zones. Calliper logs reveal many faults and caved-in zones generally indicating rocks with low integrity at the borehole wall. The preponderance of these zones, as indicated by the logs, suggests that their response may dominate the seismic-reflection wavefield. Outside fault zones, compressional and shear-wave velocities exhibit significant variability due to porosity, the heterogeneity of volcanic fragmental rocks and alteration. Distributed acoustic sensing was used to acquire vertical seismic profiling data in the two boreholes surveyed with wireline logs. Straight and helically wound fibre-optic cables housed standard fibres and a fibre engineered to increase the intensity of backscattering at the distributed acoustic sensing interrogator. Standard and engineered optical fibres placed in the two boreholes were daisy-chained together to form two 5-km-long continuous fibres that were interrogated at once with two interrogators. A new generation of interrogator connected to the engineered fibres provided field data with lower noise level and higher signal-to-noise ratio. These data with higher signal-to-noise ratio from straight fibre-optic cable were processed and used for depth imaging. Depth images benefitted from new migration weights that account for the directional sensitivity of the straight fibre-optic cable and limit the extent of migration artefacts. Migration results show several reflectors with shallow dips to the northwest, some explained by faults intersecting the surveyed boreholes. The main sub-vertical lithological and alteration contacts at New Afton generated downgoing reflections that were not considered in the migration.