Oil persistence on beaches in Prince William Sound - a review of SCAT surveys conducted from 1989 to 2002

In 2002, 13 years after the Exxon Valdez oil spill (EVOS), 39 selected sites in Prince William Sound (PWS) were re-surveyed following established shoreline cleanup assessment team (SCAT) field observation procedures to document surface and sub-surface oiling conditions in shoreline sediments and to compare results with those from previous Shoreline Cleanup Assessment Team (SCAT) surveys and other surveys in PWS. The selected sites are locations where EVOS oil persisted in 1992, at the time the Federal and State On-Scene Coordinators determined that the cleanup was complete and that further cleanup activities would provide no net environmental benefit. These sites had been included in a 2001 NOAA survey of shoreline oiling conditions and account for 88% of the sub-surface oil residues (SSO) oil documented by that study. The 2002 field survey found isolated occurrences of residual EVOS surface oil residues (SO) in the form of weathered asphalt pavement at 15 of the 39 sites. This residual SO typically consisted of asphalt in mixed sand/gravel substrate, located within a wave shadow effect created by boulders or bedrock in the upper intertidal to supratidal zone. Residual SO, expressed as a continuous oil cover, was less than 200 m(2) within the approximately 111,120 m(2) surveyed. A total of 1182 pits were dug at locations where SSO residues were present in 1992. Six of the 39 sites and 815 (68%) of the pits contained no residual SSO. Eighty-three percent of pits with SSO residues were found primarily in middle to upper intertidal locations. SSO residues commonly occurred in a discontinuous approximately 3 cm thick band 5-10 cm below the boulder/cobble or pebble/gravel veneer. The SO and SSO occurrences in the 2002 survey closely match the locations where they were found in 1992 and earlier surveys; however, in 2002 residual SSO patches are more discontinuous and thinner than they were in the earlier surveys. These sites are biased toward SSO persistence; those that have SSO residues represent less than 0.5% of the originally oiled shorelines in PWS. Despite evidence of continued oil weathering, both at the surface and in the sub-surface, it is clear that the natural cleaning processes at these particular locations are slow. The slow weathering rates are a consequence of the oil residue being incorporated in finer sediments (fine sand, silt, mix) and isolated from active weathering processes as boulders and outcrops, shallow bedrock asperities, or boulder-armoring create wave shadows and limit effective physical action on shorelines.     

Vertical seismic profiling using distributed acoustic sensing with scatter-enhanced fibre-optic cable at the Cu–Au New Afton porphyry deposit,British Columbia,Canada

Wireline logs and vertical seismic profile data were acquired in two boreholes intersecting the main mineralized zone at the Cu–Au New Afton porphyry deposit, Canada, with the objectives of imaging lithological contacts, fault zones that may have acted as conduits that channelled the mineralization, and alteration zones. Log data provide physical rock properties for the main lithologies and alteration zones. Calliper logs reveal many faults and caved-in zones generally indicating rocks with low integrity at the borehole wall. The preponderance of these zones, as indicated by the logs, suggests that their response may dominate the seismic-reflection wavefield. Outside fault zones, compressional and shear-wave velocities exhibit significant variability due to porosity, the heterogeneity of volcanic fragmental rocks and alteration. Distributed acoustic sensing was used to acquire vertical seismic profiling data in the two boreholes surveyed with wireline logs. Straight and helically wound fibre-optic cables housed standard fibres and a fibre engineered to increase the intensity of backscattering at the distributed acoustic sensing interrogator. Standard and engineered optical fibres placed in the two boreholes were daisy-chained together to form two 5-km-long continuous fibres that were interrogated at once with two interrogators. A new generation of interrogator connected to the engineered fibres provided field data with lower noise level and higher signal-to-noise ratio. These data with higher signal-to-noise ratio from straight fibre-optic cable were processed and used for depth imaging. Depth images benefitted from new migration weights that account for the directional sensitivity of the straight fibre-optic cable and limit the extent of migration artefacts. Migration results show several reflectors with shallow dips to the northwest, some explained by faults intersecting the surveyed boreholes. The main sub-vertical lithological and alteration contacts at New Afton generated downgoing reflections that were not considered in the migration.     

The Zymoetz River landslide, British Columbia, Canada: description and dynamic analysis of a rock slide–debris flow

The Zymoetz River landslide is a recent example of an extremely mobile type of landslide known as a rock slide–debris flow. It began as a failure of 900,000 m³ of bedrock, which mobilized an additional 500,000 m³ of surficial material in its path, transforming into a large debris flow that traveled over 4 km from its source. Seasonal snow and meltwater in the proximal part of the path were important factors. A recently developed dynamic model that accounts for material entrainment, DAN3D, was used to back-analyze this event. The two distinct phases of motion were modeled using different basal rheologies: a frictional model in the proximal path and a Voellmy model in the distal path, following the initiation of significant entrainment. Very good agreement between the observed and simulated results was achieved, suggesting that entrainment capabilities are essential for the successful simulation of this type of landslide.     

Anomalous cosmogenic 3He production and elevation scaling in the high Himalaya

The production rate of cosmogenic ³He in apatite, zircon, kyanite and garnet was obtained by cross-calibration against ¹⁰Be in co-existing quartz in glacial moraine boulders from the Nepalese Himalaya. The boulders have ¹⁰Be ages between 6 and 16 kyr and span elevations from 3200 to 4800 m. In all of these minerals ³He correlates with ¹⁰Be and is dominantly cosmogenic in origin. After modest correction for non-cosmogenic components, ³He/¹⁰Be systematics imply apparent sea-level high-latitude (SLHL) apparent production rates for ³He of 226 atoms g^? 1 yr^? 1 in zircon, 254 atoms g^? 1 yr^? 1 in apatite, 177 atoms g^? 1 yr^? 1 in kyanite, and 153 atoms g^? 1 yr^? 1 in garnet. These production rates are unexpectedly high compared with rates measured elsewhere in the world, and also compared with proposed element-specific production rates. For apatite and zircon, the data are sufficient to conclude that the ³He/¹⁰Be ratio increases with elevation. If this reflects different altitudinal scaling between production rates for the two isotopes then the SLHL production rates estimated by our approach are overestimates. We consider several hypotheses to explain these observations, including production of ³He via thermal neutron capture on ⁶Li, altitudinal variations in the energy spectrum of cosmic-ray neutrons, and the effects of snow cover. Because all of these effects are small, we conclude that the altitudinal variations in production rates of cosmogenic ³He and ¹⁰Be are distinct from each other at least at this location over the last ～ 10 kyr. This conclusion calls into question commonly adopted geographic scaling laws for at least some cosmogenic nuclides. If confirmed, this distinction may provide a mechanism by which to obtain paleoelevation estimates.     

Seasonal Forecasts of the Summer 2016 Yangtze River Basin Rainfall

The Yangtze River has been subject to heavy flooding throughout history,and in recent times severe floods such as those in 1998 have resulted in heavy loss of life and livelihoods.Dams along the river help to manage flood waters,and are important sources of electricity for the region.Being able to forecast high-impact events at long lead times therefore has enormous potential benefit.Recent improvements in seasonal forecasting mean that dynamical climate models can start to be used directly for operational services.The teleconnection from El Ni ?no to Yangtze River basin rainfall meant that the strong El Ni ?no in winter 2015/16 provided a valuable opportunity to test the application of a dynamical forecast system.This paper therefore presents a case study of a real-time seasonal forecast for the Yangtze River basin,building on previous work demonstrating the retrospective skill of such a forecast.A simple forecasting methodology is presented,in which the forecast probabilities are derived from the historical relationship between hindcast and observations.Its performance for2016 is discussed.The heavy rainfall in the May–June–July period was correctly forecast well in advance.August saw anomalously low rainfall,and the forecasts for the June–July–August period correctly showed closer to average levels.The forecasts contributed to the confidence of decision-makers across the Yangtze River basin.Trials of climate services such as this help to promote appropriate use of seasonal forecasts,and highlight areas for future improvements.     

Sedimentary sequences, seismofacies and evolution of depositional systems of the Oligo/Miocene Lower Freshwater Molasse Group, Switzerland

ABSTRACT Magnetostratigraphic chronologies, together with sedimentological, petrological, seismic and borehole data derived from the Oligo/Miocene Lower Freshwater Molasse Group of the North Alpine foreland basin enable a detailed reconstruction of alluvial architecture in relation to Alpine orogenic events. Six depositional systems are recorded in the Lower Freshwater Molasse Group. The bajada depositional system comprises 200–400-m-thick successions of ribbon channel conglomerates and overbank fines including mud- and debris-flows which were derived from the Alpine border chain. The alluvial megafan depositional system is made up of massive pebble-to-cobble conglomerates up to 3 km thick which reveal a fan-shaped geometry. This depositional environment grades downcurrent into the conglomerate channel belt depositional system, which comprises an ≈2-km-thick alternation of channel conglomerates and overbank fines. The sandstone channel belt depositional system is bordered by the 100–400-m-thick overbank fines assigned to the floodplain depositional system. At the feather edge of the basin, 50–400-m-thick lacustrine sediments in both clastic and carbonate facies represent the lacustrine depositional system. The spatial and temporal arrangement of these depositional systems was controlled by the geometrical evolution of the Molasse Basin. During periods of enhanced sediment supply and during phases of stable sliding of the entire wedge, >2000-m-thick coarsening-and thickening-upward megasequences comprising the conglomerate channel belt, alluvial megafan and bajada depositional systems were deposited in a narrow wedge-shaped basin. In the distal reaches of the basin, however, no sedimentary trend developed, and the basin fill comprises a <500-m-thick series of sandstone meander belt, floodplain and lacustrine depositional systems. During phases of accretion at the toe of the wedge, the basin widened, and prograding systems of multistorey channel sandstones extended from the thrust front to the distal reaches of the basin. The rearrangement of the depositional systems as a function of changing orogenic conditions created discordances, which are expressed seismically by onlap and erosion of beds delimiting sedimentary sequences. Whereas stable sliding of the wedge succeeded by accretion at the toe of the wedge is recorded in the proximal Lower Freshwater Molasse by a coarsening-and thickening-upward megasequence followed by erosion, the opposite trend developed in the distal reaches of the Molasse. Here, fine-grained sandstones and mudstones were deposited during periods of stable sliding, whereas phases of accretion caused a coarsening- and thickening-up megasequence to form.     

The Science and Policy of the Verified Carbon Standard Methodology for Tidal Wetland and Seagrass Restoration

The restoration of tidal wetland and seagrass systems has the potential for significant greenhouse gas benefits, but project-level accounting procedures have not been available at an international scale. In this paper, we describe the Verified Carbon Standard Methodology for Tidal Wetland and Seagrass Restoration, which provides greenhouse gas accounting procedures for marsh, mangrove, tidal forested wetland, and seagrasses systems across a diversity of geomorphic conditions and restoration techniques. We discuss and critique the essential science and policy elements of the methodology and underlying knowledge gaps. We developed a method for estimating mineral-protected (recalcitrant) allochthonous carbon in tidal wetland systems using field-collected soils data and literature-derived default values of the recalcitrant carbon that accompanies mineral deposition. We provided default values for methane emissions from polyhaline soils but did not provide default values for freshwater, oligohaline, and mesohaline soils due to high variability of emissions in these systems. Additional topics covered are soil carbon sequestration default values, soil carbon fate following erosion, avoided losses in organic and mineral soils, nitrous oxide emissions, soil profile sampling methods, sample size, prescribed fire, additionality, and leakage. Knowledge gaps that limit the application of the methodology include the estimation of CH₄ emissions from fresh and brackish tidal wetlands, lack of validation of our approach for the estimation of recalcitrant allochthonous carbon, understanding of carbon oxidation rates following drainage of mineral tidal wetland soils, estimation of the effects of prescribed fire on soil carbon stocks, and the analysis of additionality for projects outside of the USA.     

Chronology of glaciations in the Sierra Nevada,California, from 10Be surface exposure dating

We use ¹⁰Be surface exposure dating to construct a high-resolution chronology of glacial fluctuations in the Sierra Nevada, California. Most previous studies focused on individual glaciated valleys, whereas our study compares chronologies developed throughout the range to identify regional patterns in the timing of glacier response to major climate changes. Sites throughout the range indicate Last Glacial Maximum retreat at 18.8 ± 1.9 ka (2σ) that suggests rather consistent changes in atmospheric variables, e.g., temperature and precipitation, throughout the range. The penultimate glacial retreat occurred at ca 145 ka. Our data suggest that the Sierra Nevada landscape is dominated by glacial features deposited during marine isotope stage (MIS) 2 and MIS 6. Deposits of previously recognized glaciations between circa 25 and 140 ka, e.g., MIS 4, Tenaya, early Tahoe, cannot be unequivocally identified. The timing of Sierra Nevada glacial retreat correlates well with other regional paleoclimate proxies in the Sierra Nevada, but differs significantly from paleoclimate proxies in other regions. Our dating results indicate that the onset of LGM retreat occurred several thousand years earlier in the Sierra Nevada than some glacial records in the western US.