3D gravity modelling for Anyongbok Seamount in the East Sea

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.     

Experimental studies on the slowly varying drift motion of a berthed container ship model

The effects of free-surface waves on the floating structures are of great importance in the offshore industry. Among the six degrees of motions of a surface ship the absence of restoring forces in surge, sway and yaw led to critical situations for moored ships in the recent times. The order of forces in horizontal plane and their exciting frequencies are matters of interest. The resonance with the presence of moored chains led to many accidents in the recent past. The lines in dry conditions may not give good damping and in wet condition they may trigger the system to chaotic motions and jumps. Two different loading conditions of a container ship model are tested with waves in laboratory conditions in two different drafts. The mooring lines are chosen as per scale law and the energy under the response spectrum is determined from the plots. The results give new insights into the movement of a berthed ships subjected to waves. Response of the moored ship to different loading conditions in different water depths are discussed in this paper. The paper gives the order of energy due to first-order and slowly varying movement of a berthed container model in a towing tank.     

Jellyfish patch formation investigated by aerial photography and drifter experiment

Jellyfish patch formation is investigated by conducting a drifter experiment combined with aerial photography of a sustained patch of the moon jellyfish in Hokezu Bay, Japan. Jellyfish patches are aggregations of individuals that are caused by a combination of swimming (active influence) and advection by currents (passive influence). The drifter experiment involved the injection of 49 drifters around a distinct surface patch of jellyfish within an area of approximately 300 m × 300 m. The drifters’ motion, caused only by the passive influence, was recorded in a series of 38 aerial photographs taken over approximately 1 h. The ambient uniform current field larger than the patch scale was estimated from the movement of the centroid position of drifters, while the distribution of horizontal divergence and relative vorticity around the patch was estimated from the time-derivative in areas of triangles formed by the drifters. The centroid positions of both drifters and patches moved stably toward the bay head at different speeds. The difference vector between the patch and drifter centroids was directed to the sun, and was opposite to the ambient current. The distributions of vorticity and divergence around patches exhibited inhomogeneity within the patch scale, and the drifters in this nonuniform current field aggregated near the convergence area within 1 h. The results suggest that horizontal patch formation is predominantly influenced by passive factors at the surface of Hokezu Bay. Furthermore, the upward swimming against downwelling may make sustained patch in surface layer.     

Chronic sublethal effects of the water soluble fractions of no. 2 fuel oils on the marine isopod, Sphaeroma quadridentatum

Two series of experiments were carried out to assess the long-term effects of the water soluble fractions (WSF) of fuel oils on the marine isopod, Sphaeroma quadridentatum. In one experiment, juvenile isopods (one month old) were exposed to sublethal concentrations (0·1% to 15% WSF) of a fuel oil (Baytown, Exxon) at room temperatures of 24 ± 1–6°C for nine months. These isopods survived to maturity and reproduced. However, growth rate was adversely affected at concentration ≥ 3% WSF and fecundity was depressed at concentrations ≥ 1% WSF. Survival of offspring in clean seawater was dependent to a large extent on the history of the previous generation. Offspring from groups exposed to ≥ 1% WSF experienced high mortality (> 70% within five weeks) even in clean seawater. This may imply that a population of Sphaeroma exposed to WSF as low as 0·2 ppm may eventually disappear, although animals can grow to maturity and reproduce at concentrations < 3 ppm.In another experiment, adult Sphaeroma (three months old) were subjected to the WSFs of four fuel oils (Baton Rouge, Baytown, Montana and New Jersey) for one month. Fecundity was depressed at a concentration > 15% WSF, regardless of the kind of fuel oil. On the other hand, the number of young produced bythe surviving females varied with the type of fuel oil for the same level of WSF. This may be attributed to different relative amounts of toxic components present in the WSF.     

Nocdap results: On the relationship of extreme waves and currents for design of offshore structures

Simultaneous wind, wave, and current data during 21 storms spanning four winters at Tromsøflaket (230 m depth) were analysed to determine joint probabilities of occurrence. Waves were measured with a Waverider Buoy, winds with a recording anemometer onboard a vessel and currents at up to five depths with Aandera RCM-4 current meters. Measured currents were filtered to separate tidal currents from residual currents. In most of the statistical analyses, the actual current profiles were replaced with a simplified “equivalent” profile (constant above 50 m depth) whose magnitude was chosen to give the same drag load on a single pile as the actual profile when both profiles were combined with wave orbital velocities. The data suggest that the equivalent current is weakly correlated with the wave height. Within the range of the data analysed, an in-line equivalent residual current of 30 cm sec⁻¹ is adequate for design drag force calculations.The data presented here are used to illustrate a procedure for data analysis and are not suitable for use as design criteria.     

Baroclinic Buoyancy-Inertia Joint Stability Parameter

At present, the barotropic buoyant stability parameter has been derived from a vertical virtual displacement of a water parcel. The barotropic inertial stability parameter in the eccentrically cyclogeostrophic, basic current field was derived in 2003 from a horizontal cross-stream virtual displacement of a parcel. By expressing acceleration of a parcel due to a virtual displacement, which is arbitrarily sloping within a vertical section across the basic current, in terms of natural coordinates, we derived the vertical component of baroclinic buoyant stability parameter B ₂ ², the horizontal component of baroclinic inertial stability parameter I ₂ ², the baroclinic joint stability parameter J ², its buoyant component B ² and its inertial component I ². B ² is far greater than I ₂ ², and when neglecting relative vorticity except for vertical shear, a downward convex curve of J ² plotted against the slope of a virtual displacement follows a trend of B ² curve. If a parcel displaces along a horizontal surface or an isopycnal surface, however, B ² vanishes, and J ² becomes equal to I ². Actual parcel is apt to displace not only along the bottom slope, but also along the sea surface and an isopycnal interfacial surface, which is approximately equivalent to an isentropic surface, preferred by lateral mixing and exchange of momentum. Such actual displacement makes B ² vanishing, and grants I ² an important role. The present analysis of I ² examining effects due to curvature and horizontal and vertical shear vorticities are useful in deepening our understanding of baroclinic instability in actual oceanic streams.     

Summer distribution and geochemical composition of suspended-particulate matter in the east china sea

The distribution and geochemical composition of suspended-particulate matter (SPM) in the East China Sea (ECS) were investigated during the summer period of high continental runoff to elucidate SPM sources, distribution and cross-shelf transport. The spatial variability of SPM distribution (0.3–6.5 mg l⁻¹) and geochemical composition (POC, Al, Si, Fe, Mn, Ca, Mg and K) in the ECS was pronounced during summer when the continental fluxes of freshwater and terrestrial materials were highest during the year. Under the influences of Changjiang runoff, Kuroshio intrusion, surface production and bottom resuspension, the distribution generally showed strong gradients decreasing seaward for both biogenic and lithogenic materials. Particulate organic carbon was enriched in surface water (mean ∼18%) due to the influence of biological productivity, and was diluted by resuspended and/or laterally-transported materials in bottom water (mean 9.4%). The abundance of lithogenic elements (Al, Si, Fe, Mn) increased toward the bottom, and the distribution correlations were highly significant. Particulate CaCO₃ distribution provided evidence that the SPM of the bottom water in the northern part of the study area was likely mixed with sediments originally derived from Huanghe. A distinct benthic nepheloid layer (BNL) was present in all seaward transects of the ECS shelf. Sediment resuspension may be caused by tidal fluctuation and other forcing and be regarded as the principal agent in the formation of BNL. This BNL was likely responsible for the transport of biogenic and lithogenic particles across or along the ECS shelf. Total inventories of SPM, POC and PN are 46, 2.8 and 0.4 Tg, respectively, measured over the total area of 0.45 × 10⁶ km² of the ECS shelf. Their mean residence times are about 27, 13 and 11 days, respectively. The inventory of SPM in the water column was higher in the northernmost and southernmost transects and lower in the middle transects, reflecting the influences of terrestrial inputs from Changjiang and/or resuspended materials from Huanghe deposits in the north and perhaps from Minjiang and/or Taiwan’s rivers in the south. The distribution and transport patterns of SPM and geochemical elements strongly indicate that continental sources and cross-shelf transport modulate ECS particulate matter in summer.     

Barotropic tidal mixing effects in a coupled climate model: Oceanic conditions in the Northern Atlantic

Impacts of mixing driven by barotropic tides in a coupled climate model are investigated by using an atmosphere–ocean–ice–land coupled climate model, the GFDL CM2.0. We focus on oceanic conditions of the Northern Atlantic. Barotropic tidal mixing effects increase the surface salinity and density in the Northern Atlantic and decrease the RMS error of the model surface salinity and temperature fields related to the observational data.     

Identification of Pb sources in Yellow Sea sediments using stable Pb isotope ratios

Rapid economic developments in East Asian countries have inevitably resulted in environmental degradation in the surrounding seas, and concern for both the environment and protection from pollutants is increasing. Identification of sources of contaminants is essential to environmental pollution management. In this study, the provenance of anthropogenic lead (Pb), a major pollutant of Yellow Sea sediments, was determined for river mouth sediments, including those of the Changjiang, Huanghe, Han, and Geum Rivers, and for age-determined shelf core sediments through the measurement of Pb isotope ratios in the HCl-leached fraction using multi-collector inductively coupled plasma-mass spectrometry (MC ICP/MS). Anthropogenic Pb has accumulated in shelf core sediments since 1910, and its isotope ratios were estimated as 0.863–0.866 and 2.119–2.125 for ²⁰⁷Pb/²⁰⁶Pb and ²⁰⁸Pb/²⁰⁶Pb, respectively, from the mixing relationships of the two endmembers. River mouth sediments exhibited enough distinction in anthropogenic Pb isotope ratios to be discriminated: 0.874 (2.144) in the Huanghe, 0.856 (2.129) in the Han, 0.857 (2.122) in the Geum, and 0.854 (2.101) in the Changjiang for ²⁰⁷Pb/²⁰⁶Pb (²⁰⁸Pb/²⁰⁶Pb), respectively. Although isotope ratios of geogenic Pb in sediments dating before 1910 showed narrow ranges (0.842–0.845 and 2.088–2.100 for ²⁰⁷Pb/²⁰⁶Pb and ²⁰⁸Pb/²⁰⁶Pb, respectively), distinct isotope ratios in each core permitted source identification of sediments in the Yellow Sea based on geographic locations and the geogenic Pb of each river. By comparing the isotope ratios of the estimated anthropogenic Pb to source-related materials, the provenances of anthropogenic Pb in Chinese river sediments were presumed to be Chinese coal or ore, which is also a major source of atmospheric particulate Pb. The anthropogenic Pb in the shelf core sediments in the northern Yellow Sea originated from northern Chinese cities such as Beijing and Tianjin through atmospheric pathways. Pb isotope ratios indicated that Pb in Korean river sediments was characteristic of local Korean ores.     

Instrumentation and Numerical Analysis of Cylindrical Diaphragm Wall Movement During Deep Excavation at Coastal Area

The lateral deflection of a cylindrical diaphragm wall and the associated ground movement induced by deep excavation are analyzed by performing site instrumentations and numerical analyses in the coastal area of Korea. Wall lateral deflection, rebar stress, and pore water pressure were measured and analyzed in eight directions. Variations of soil properties with the decrease of confining pressure are compared by performing various in situ tests before ad after excavation. To calculate the wall lateral deflection accurately, the effects of small strain nonlinearity, confining pressure, and the hysteresis loading/unloading loop developed during excavation are considered in the proposed numerical analysis. By comparing numerical results with measured ones, the importances of considering small strain nonlinearity and confining pressure reduction in the nonlinear (FEM) are emphasized. Also, the effects of wall stiffness on the performance of cylindrical diaphragm walls are studied for future similar excavation in the coastal area.