Massive sedimentation of fine sediment with organic matter and enhanced benthic-pelagic coupling by an artificial dyke in semi-enclosed Chonsu Bay, Korea

To assess the impact of an artificial dyke in Chonsu Bay (CBD) on the organic carbon (C(org)) cycle, we measured excess (210)Pb activities, C(org) and nitrogen content in sediment cores. The C(org) oxidation rates (C(ox)) on the surface sediment and benthic nutrient fluxes were also quantified with an in situ benthic chamber. The higher excess (210)Pb inventory, C(org) and nitrogen in cores near the CBD indicated lateral transport and local, massive deposition of particulate matter due to tidal circulation altered by artificial dyke construction. The C(ox) in sediment near the CBD was about twice as high as that out of the bay, suggesting the importance of benthic remineralization of organic matter. The benthic fluxes of dissolved inorganic nitrogen and phosphate were four to six times higher than those outside the bay, corresponding to 141% and 131% respectively, of the requirements for primary production.     

Fragility analysis of low‐rise masonry in‐filled reinforced concrete buildings by a coefficient‐based spectral acceleration method

This study presents a seismic fragility analysis of low‐rise masonry in‐filled (MI) reinforced concrete (RC) buildings using a proposed coefficient‐based spectral acceleration method. The coefficient‐based method, without requiring any complicated finite element analysis, is a simplified procedure for assessing the spectral acceleration demand (or capacity) of buildings subjected to earthquakes. This paper begins with a calibration of the proposed coefficient‐based method for low‐rise MI RC buildings using published experimental results obtained from shaking table tests. Spectral acceleration‐based fragility curves for low‐rise MI RC buildings under various inter‐story drift limits are then constructed using the calibrated coefficient‐based method. A comparison of the experimental and estimated results indicates that the simplified coefficient‐based method can provide good approximations of the spectral accelerations at peak loads of low‐rise MI RC buildings, if a proper set of drift‐related factors and initial fundamental periods of structures are used. Moreover, the fragility curves constructed using the coefficient‐based method can provide a satisfactory vulnerability evaluation for low‐rise MI RC buildings under a given performance level. Copyright © 2011 John Wiley & Sons, Ltd.     

Spatial risk assessment of typhoon cumulated rainfall: a case study in Taipei area

Typhoon is one of the most destructive disasters in Taiwan, which usually causes many floods and mudslides and prevents the electrical and water supply. Prior to its arrival, how to accurately forecast the path and rainfall of typhoon are important issues. In the past, a regression-based model was the most applied statistical method to evaluate the associated problems. However, it generally ignored the spatial dependence in the data, resulting in less accurate estimation and prediction, and the importance of particular explanatory variables may not be apparent. Therefore, in this paper we focus on assessing the spatial risk variations regarding the typhoon cumulated rainfall at Taipei with respect to typhoon locations by using the spatial hierarchical Bayesian model combined with the spatial conditional autoregressive model, where the model parameters are estimated by designing a family of stochastic algorithms based on a Markov chain Monte Carlo technique. The proposed method is applied to a real data set of Taiwan for illustration. Also, some important explanatory variables regarding the typhoon cumulated rainfall at Taipei are indicated as well.     

Evolution of the shear wave velocity during shaking modeled in centrifuge shaking table tests

Two in-flight shear wave velocity measurement systems were developed to perform the subsurface exploration of shear wave velocity in a centrifuge model. The bender elements test and the pre-shaking test used in the study provided reliable and consistent shear wave velocity profiles along the model depth before and after shaking in the centrifuge shaking table tests. In addition, the use of the bender elements measurement system particularly developed here allowed continuous examination of the evolution of shear wave velocity not only during and after the shaking periods in the small shaking events but also during the dissipation period of excess pore water pressure after liquefaction in the large shaking events. The test results showed that the shear wave velocity at different values of excess pore water pressure ratio varied as the effective mean stress to the power of 0.27, to a first approximation. Consequently, a relationship between the shear wave velocity evolution ratio and the excess pore water pressure ratio is proposed to evaluate the changes in shear wave velocity due to excess pore water generation and dissipation during shaking events. This relation will assist engineers in determining the shear stiffness reduction ratio at various r_u levels when a sand deposit is subjected to different levels of earthquake shaking.     

Towards multiple hazard resilient bridges: a methodology for modeling frequent and infrequent time-varying loads Part I, Comprehensive reliability and partial failure probabilities

The current AASHTO load and resistance factor design (LRFD) guidelines are formulated based on bridge reliability,which interprets traditional design safety factors into more rigorously deduced factors based on the theory of probability.This is a major advancement in bridge design specifications.However,LRFD is only calibrated for dead and live loads.In cases when extreme loads are significant,they need to be individually assessed.Combining regular loads with extreme loads has been a major challenge,mainly because the extreme loads are time variables and cannot be directly combined with time invariant loads to formulate the probability of structural failure.To overcome these difficulties,this paper suggests a methodology of comprehensive reliability,by introducing the concept of partial failure probability to separate the loads so that each individual load combination under a certain condition can be approximated as time invariant.Based on these conditions,the extreme loads (also referred to as multiple hazard or MH loads) can be broken down into single effects.In Part Ⅱ of this paper,a further breakdown of these conditional occurrence probabilities into pure conditions is discussed by using a live truck and earthquake loads on a bridge as an example.There are three major steps in establishing load factors from MH load distributions:(1) formulate the failure probabilities;(2) normalize various load distributions;and (3) establish design limit state equations.This paper describes the formulation of the failure probabilities of single and combined loads.     

Applicability of Individual Transferable Quotas (ITQs) in Japanese fisheries: A comparison of rights-based fisheries management in Iceland, Japan, and United States

ITQs have not yet been introduced by the Government of Japan. In coastal areas, fishery cooperative associations have traditionally played an important role in managing fisheries through self-imposed rules and peer-monitoring systems. Recently, however, the economic competitiveness of Japanese fisheries in the international market is being questioned. In this paper, a detailed examination of the pros and cons of the current system in Japan is compared to the current fishery management measures of Iceland and the United States, where attaining economically or biologically efficient outcomes may be prioritized in making fisheries management decisions. For many coastal fisheries in Japan, maintaining a management scheme in which stakeholders play an active role in determining fisheries measures seems more relevant if their priority is to maintain the stability of coastal communities and equity of stakeholders. Intensive dialog among stakeholders would be necessary to identify shared objectives of their fishery operations and to make decisions to establish specific steps toward the goal of increasing economic efficiency, environmental sustainability, or stability of communities and equity of stakeholders.     

The study on highly expressed proteins as a function of an elevated ultraviolet radiation in the copepod, Tigriopus japonicus

The objective of the study was to analyze constantlyhighly expressed proteins as a function of elevated midultraviolet (UVB, 280?C315 nm) radiation in Tigriopus japonicus sensu lato (T. japonicus s.l). We also analyzed associations between kinetics of radiation avoidance, measured as a covered distance per time unit, and highly expressed proteins. The obtained results indicate an increase in T. japonicus s.l. mobility between the control (no radiation) and mild UV radiation levels (15 kJ·m^?2). Two-dimensional gel electrophoresis combined with MALDI-MS-MS resulted in 2D protein map comprising of 686 protein spots, of which 19 were identified as highly expressed proteins across all experimental conditions. Obtained results indicate that calpain, vitellogenin, and collagenase are housekeeping protein that are expressed at a constant level independently of environmental changes and that adoption of a locomotive system for the avoidance of a UV source may be, at least partially, supported by hepatopancreas-driven metabolism.     

Influence of Environmental Variables on the Distribution of Macrobenthos in the Han River Estuary, Korea

We compared environmental effects on the macrobenthic community of the Han River Estuary in summer, when freshwater input from the Han River increased, and in spring, when freshwater input decreased. Field samples were taken from the upper region of the Shingok reservoir to the southern area of Ganghwado at 18 sampling sites after rainy (August 2006) and dry (March 2007) seasons. Macrobenthic fauna were collected using a Van Veen Grab (0.025 m² and 0.1 m²) and environmental factors were measured simultaneously. Dominant species of macrobenthic fauna and the macrobenthic community were divided into two areas, the area of the Han River with no salinity (< 0.1 psu) and the southern part of Ganghwado with salinity (> 20 psu). The dominant species Byblis japonicus appeared at Junruri in the dry season. The distributions of two polychaetes, Hediste japonica and Nephtys caeca, were divided into the lower and upper areas of the Singok submerged weir. BIO-ENV (the matching of biotic to environmental patterns) analysis revealed that salinity was the most important factor affecting macrobenthic communities in the Han River Estuary, with other factors such as sediment grain size, bottom dissolved oxygen, and total organic carbon of sediment being secondary.     

First retrieval of data regarding spatial distribution of Asian dust aerosol from the Geostationary Ocean Color Imager

Aerosol optical thickness (AOT) was retrieved from the Geostationary Ocean Color Imager (GOCI) on board the Communication, Ocean, and Meteorological Satellite (COMS) for the first time. AOT values were retrieved over the ocean at a spatial scale of 0.5 × 0.5 km² by using the look-up table (LUT)-based separation technique. The radiative transfer model (RTM) was used for different models of atmosphere-ocean environmental conditions, taking into account the realistic variability of scattering and absorption. Ocean surface properties affected by whitecaps and pigment content were also taken into account. The results show that the radiance observed by the GOCI amounts to only 5% of the radiation that penetrated the ocean and, consequently, 95% of the radiation is scattered in the atmosphere or reflected at the ocean surface in the visible wavelengths longer than 0.6 ìm. Within these wavelengths, radiance variations at the top of atmosphere (TOA) due to pigment variations are within 10%, while the radiance variation due to wind speed is considerably higher. For verification of GOCI-retrieved AOTs, comparison between GOCI and ground-based sunphotometer measurement at Gosan, Korea (126.10°E, 33.23°N)) showed good correlation (r = 0.99). The GOCI observations obtained by using the proposed technique showed promising results for the daily monitoring of atmospheric aerosol loading as well as being useful for environmental supervisory authorities.     

Impact of multiple satellite ocean color samplings in a day on assessing phytoplankton dynamics

Ocean-color imagers on conventional polar-orbiting satellites have a revisit time of ??2 days for most regions, which is further reduced if the area is frequently cloudy. The Geostationary Ocean Color Imager (GOCI), the first ocean-color imager on a geostationary satellite, provides measurements 8 times a day, thus significantly improving the frequency of measurements for studies of ocean environments. Here, we use results derived from GOCI measurements over Taihu Lake to demonstrate that the extra sampling can be used to improve the accuracy of statistically averaged longer-term (daily) measurements. Additionally, using numerical simulations, we demonstrate that the coupling of diurnal variations of both biomass and photosynthetic available radiation can improve the accuracy of daily primary production estimates. These results echo that higher sampling frequency can improve our estimates of longer-term dynamics of biogeochemical processes and highlights the value of ocean color measurements from geostationary satellites.