Evidence for slope instability and current-induced sediment transport,the RMSTitanic wreck search area,Newfoundland rise

The first map of the sea bed morphology and sedimentary features within the RMSTitanic search area is proposed from the interpretation of SAR side-scan sonar images. Downslope sedimentary features such as erosional furrows and crown scarps constitute a 7 km wide instability corridor. A large field (15 km²) of asymmetrical sediment waves indicating a downslope transport is identified. Current-induced features corresponding to associated sand ribbons and barchan dunes resulting from the Western Boundary Undercurrent action are mapped. The morphology of theTitanic Canyon is also precised from the SAR images. Finally, the origin of the sea bed features is discussed in an attempt to link each bed form to a sedimentary process.     

Light Curve Modelling and Evolutionary Status of the Short Period Binary 1SWASP J092328.76+435044

Light curve modeling for the newly discovered super contact low-mass WUMa system 1SWASPJ092328.76+435044 was carried out by using a new BVR complete light curves. A spotted model was applied to treat the asymmetry of the light curves. The output model was obtained by means of Wilson–Devinney code, which reveals that the massive component is hotter than the less massive one with about ΔT ～ 40 K. A total of six new times of minima were estimated. The evolutionary state of the system components was investigated based on the estimated physical parameters.     

Production of krypton and xenon isotopes in thick stony and iron targets isotropically irradiated with 1600 MeV protons

Abstract— Two spherical targets made of gabbro with a radius of 25 cm and of steel with a radius of 10 cm were irradiated isotropically with 1600 MeV protons at the SATURNE synchrotron at Laboratoire National Saturne (LNS)/CEN Saclay, in order to simulate the production of nuclides in meteorites induced by galactic cosmic‐ray protons in space. These experiments supply depth‐dependent production rate data for a wide range of radioactive and stable isotopes in up to 28 target elements. In this paper, we report results for ⁷⁸Kr, ^80–86Kr isotopes in Rb, Sr, Y and Zr and for ¹²⁴Xe, ¹²⁶Xe, ^128–132Xe, ¹³⁴Xe, ¹³⁶Xe isotopes in Ba and La. Krypton and xenon concentrations have been measured at different depths in the spheres by using conventional mass spectrometry. Based on Monte‐Carlo techniques, theoretical production rates are calculated by folding depth‐dependent spectra of primary and secondary protons and secondary neutrons with the excitation functions of the relevant nuclear reactions. The comparison of the model calculation results with experimental data in the thick target experiments performed at LNS and previously at CERN have allowed adjustments of the poorly known excitation functions of neutron‐induced reactions. Thus, for the two experiments at SATURNE, excellent agreement is obtained between experimental and calculated production rates for most Kr and Xe isotopes in all investigated target elements. Only Xe production in Ba in the gabbro is underestimated by the calculations by ?25%. This work validates the approach of the thin‐target model calculations of cosmogenic nuclide production rates in the attempt of modeling the interaction of galactic cosmic‐ray protons with stony and iron meteorites in space as well as with lunar samples.     

Morphological similarities between DBM and a microeconomic model of sprawl

We present a model that simulates the growth of a metropolitan area on a 2D lattice. The model is dynamic and based on microeconomics. Households show preferences for nearby open spaces and neighbourhood density. They compete on the land market. They travel along a road network to access the CBD. A planner ensures the connectedness and maintenance of the road network. The spatial pattern of houses, green spaces and road network self-organises, emerging from agents individualistic decisions. We perform several simulations and vary residential preferences. Our results show morphologies and transition phases that are similar to Dieletric Breakdown Models (DBM). Such similarities were observed earlier by other authors, but we show here that it can be deducted from the functioning of the land market and thus explicitly connected to urban economic theory.     

Low-degree partial melting trends recorded in upper mantle minerals

The study of glass inclusions inside mantle minerals provides direct information about the chemistry of naturally occurring mantle-derived melts and the fine-scale complexity of the melting process responsible for their genesis. Minerals in a spinel lherzolite nodule from Grande Comore island contain glass inclusions which, after homogenization by heating, exhibit a continuous suite of chemical compositions clearly distinct from that of the host basanitic lava. The compositions range from silicic, with nepheline–olivine normative, 64 wt% SiO₂ and 11 wt% alkali oxides, to almost basaltic, with quartz normative, 50 wt% SiO₂ and 1–2 wt% alkali oxides. Within a single mineral phase, olivine, the inferred primary melt composition varies from 54 to 64 wt% SiO₂ for MgO content ranging from 8 to 0.8 wt%. An experimental study of the glass and fluid inclusions indicates that trapped melts represent liquids that are in equilibrium with their host phases at moderate temperature and pressure (T≈1230°C and P≈1.0 Gpa for melts trapped in olivine). Quantitative modelling of the compositional trends defined in the suite shows that all of the glasses are part of a cogenetic set of melts formed by fractional melting of spinel lherzolite, with F varying between 0.2 and 5%. The initial highly silicic, alkali-rich melts preserved in Mg-rich olivine become richer in FeO, MgO, CaO and Cr₂O₃ and poorer in SiO₂, K₂O, Na₂O, Al₂O₃ and Cl with increasing melt fractions, evolving toward the basaltic melts found in clinopyroxene. These results confirm the connection between glass inclusions inside mantle minerals and partial mantle melts, and indicate that primary melts with SiO₂ >60 wt%, alkali oxides >11%, FeO <1 wt% and MgO <1 wt% are generated during incipient melting of spinel peridotite. The composition of the primary melts is inferred to be dependent on pressure, and to reflect both the speciation of dissolved CO₂ and the effect of alkali oxides on the silica activity coefficient in the melt. At pressures around 1 GPa, low-degree melts are characterized by alkali and silica-rich compositions, with a limited effect of dissolved CO₂ and a decreased silica activity coefficient caused by the presence of alkali oxides, whereas at higher pressures alkali oxides form complexes with carbonates and, consequently, alkali-rich silica-poor melts will be generated.     

Combining in situ isotopic, trace element and textural analyses of quartz from four magmatic-hydrothermal ore deposits

This study couples in situ ¹⁶O, ¹⁷O and ¹⁸O isotope and in situ trace element analyses to investigate and characterize the geochemical and textural complexity of magmatic-hydrothermal quartz crystals. Euhedral quartz crystals contemporaneous with mineralization were obtained from four magmatic-hydrothermal ore deposits: El Indio Au–Ag–Cu deposit; Summitville Au–Ag–Cu deposit; North Parkes Cu–Au deposit and Kingsgate quartz-Mo–Bi–W deposit. The internal features of the crystals were imaged using cathodoluminescence and qualitative electron microprobe maps. Quantitative isotopic data were collected in situ using 157 nm laser ablation inductively coupled plasma mass spectrometry (for 40 trace elements in quartz) and sensitive high-resolution ion microprobe (for 3 isotopes in quartz). Imaging revealed fine oscillatory zoning, sector zoning, complex “macromosaic” textures and hidden xenocrystic cores. In situ oxygen isotope analyses revealed a δ¹⁸O range of up to 12.4 ± 0.3 ‰ in a single crystal—the largest isotopic range ever ascribed to oscillatory zonation in quartz. Some of these crystals contain a heavier δ¹⁸O signature than expected by existing models. While sector-zoned crystals exhibited strong trace element variations between faces, no evidence for anisotropic isotope fractionation was found. We found: (1) isotopic heterogeneity in hydrothermal quartz crystals is common and precludes provenance analysis (e.g., δD–δ¹⁸O) using bulk analytical techniques, (2) the trace element signature of quartz is not an effective pathfinder toward noble metal mineralization and (3) in three of the four samples, both textural and isotopic data indicate non-equilibrium deposition of quartz.     

Accumulation,solid partitioning and remobilisation of 99Tc in subtidal and intertidal sediments in the Irish Sea

Recent studies have shown that accumulation of ⁹⁹Tc in seabed sediments labelled by authorised radioactive liquid discharges into the NE Irish Sea from the Sellafield reprocessing complex is greater than previously thought. In this paper, new data on ⁹⁹Tc concentration profiles in subtidal and intertidal sediments from the eastern and western Irish Sea are provided with a view to elucidating the processes responsible for the incorporation and retention of ⁹⁹Tc in the seabed. The data show that substantial amounts of ⁹⁹Tc have accumulated in the fine-grained subtidal sediments off the Cumbrian coast, particularly after increased releases from Sellafield following the commissioning of the Enhanced Actinide Removal Plant (EARP) in 1994. In all the cores taken in this area, ⁹⁹Tc has been found to be present to depths in excess of 30 cm. Analysis of ¹³⁷Cs and ²⁴¹Am profiles, together with other supporting geochemical data, show a high degree of homogenisation of the sediments down to these depths as a result of physical and biological processes, and confirm that incorporation of ⁹⁹Tc into the sediment compartment is actually the result of mixing and reworking, rather than active sediment accumulation. In contrast, active deposition of material transported from this mixed pool of sediment appears to be the dominant mechanism controlling ⁹⁹Tc profiles in intertidal areas close to the Sellafield discharge outfall.Data obtained from the analysis of subtidal sediment cores from the western Irish Sea mud basin suggest that similar mixing processes to those occurring in the subtidal sediments of the eastern Irish Sea are also active in this area. Time-series data on ⁹⁹Tc concentrations in surficial sediments from this basin, gathered in the period 1988–2004, inclusive, show a clear increase in concentrations, by a factor of ～2, between samples collected pre-EARP and post-EARP. The constancy of ⁹⁹Tc concentrations in surface sediments throughout the 1980s and the early-1990s suggests that little redissolution and export of ⁹⁹Tc occurred over this extended period. A similar observation applies to the post-EARP period, when concentrations remained relatively constant despite the reported steady decrease in ⁹⁹Tc concentrations in the overlying waters.This apparent lack of remobilisation is consistent with data from sequential extraction analyses, which indicate that the bulk of the ⁹⁹Tc is strongly bound to non-labile geochemical phases, with only a small proportion associated with exchangeable and acido-soluble phases. Further, these analyses show that ⁹⁹Tc is not associated with oxygen-sensitive and highly-reactive acid-volatile sulphides (AVS) to any significant extent.     

Polarimetry of Pluto

The polarization of Pluto has been measured for a range of solar phase angles from 0.8 to 1.8°. A mean linear polarization of 0.29 ± 0.01% (error of the mean) was found. No dependence of both the amount of polarization and position angles with rotational phase or solar phase angle could be detected. The positional angles of polarization agree with calculated position angles of the defect of illumination and are therefore parallel to the scattering plane. The observed polarization cannot be explained as resulting purely from a surface material which is similar to asteroidal surfaces. A hypothesis of polarization from a thin atmosphere, in addition to the surface polarization, is advanced.