Recent rapid salinity rise in three East Antarctic lakes

Research in East Antarctica has shown several recent environmental changes that may be linked to human impacts on climate. In order to detect the influence and context of these changes on coastal aquatic ecosystems we examined lake sediment cores from three lakes in the Windmill Islands, East Antarctica; Beall Lake, Holl Lake and ȁ8Lake Mȁ9. Cores were sectioned at␣2.5 mm intervals. Their diatom species composition was examined to detect changes in lake salinity using a diatom-salinity transfer function, and their algal pigment content was examined to detect photoautotrophic community responses to environmental change. Results showed that Holl Lake originated in a depression exposed by Holocene recession of the continental ice sheet and that Beall Lake and Lake M originated as isolated marine basins formed by changes in relative sea level. A general late Holocene trend of declining lake salinity was evident in all three lakes, interrupted by one short-term high salinity event in Beall Lake. This is consistent with a long-term positive moisture balance. This general decline in salinity has been followed by a remarkable recent rapid increase in salinity in all three lakes in the last few decades. We speculate that this rapid increase in salinity might be linked to changes taking place in the region including feedbacks resulting from decreasing sea ice extent as recorded in the nearby Law Dome ice core, and positive feedbacks in the catchments whereby reduced snow cover has led to decreased albedo, which in turn has caused increased evaporation and sublimation. Collectively these changes have shifted the lakes across a threshold from positive to negative moisture balance. A minor, but not rapid shift in the abundance of diatom pigments relative to pigments from green algae and cyanobacteria was also detected suggesting that some changes in photoautotrophic community composition have occurred. Measurements of modern nutrient levels are also higher than would be expected in Beall Lake and Holl Lake, given the extremely low sediment accumulation rates. This may be associated with a c. 300% increase in the population of Adélie penguins in the Windmill Islands recorded since the 1950s, or may a first signs of a rapid increase in catchment development and associated lake productivity as experienced in Antarctic and Arctic lakes subject to recent rapid regional warming. The most marked feature of the records is the rapid increase in salinity in all three lakes in␣the last few decades, which has occurred in lakes both with and without resident penguin populations.Dominic A. Hodgson and Donna Roberts contributed equally to this work     

Spatial–temporal patterns of cloud-to-ground lightning over the northwest Iberian Peninsula during the period 2010–2015

The spatial–temporal patterns of cloud-to-ground (CG) lightning covering the period 2010–2015 over the northwest Iberian Peninsula were investigated. The analysis conducted employed three main methods: the circulation weather types developed by Jenkinson and Collison, the fit of a generalized additive model (GAM) for geographic variables, and the use of a concentration index for the ratio of lightning strikes and thunderstorm days. The main activity in the summer months can be attributed to situations with eastern or anticyclonic flow due to convection by insolation. In winter, lightning proves to have a frontal origin and is mainly associated with western or cyclonic flow situations which occur with advections of air masses of maritime origin. The largest number of CG discharges occurs under eastern flow and their hybrids with anticyclonic situations. Thunderstorms with greater CG lightning activity, highlighted by a higher concentration index, are located in areas with a higher density of lightning strikes, above all in mountainous areas away from the sea. The modeling of lightning density with geographic variables shows the positive influence of altitude and, particularly, distance to the sea, with nonlinear relationships due to the complex orography of the region. Likewise, areas with convex topography receive more lightning strikes than concave ones, a relation which has been demonstrated for the first time from a GAM.     

The Kozeny‐Carman Equation with a Percolation Threshold

A procedure has been developed for calculating permeability (k) from the Kozeny‐Carman equation, a procedure that links ideas from percolation theory with the ideas of Koltermann and Gorelick (1995) and Esselburn et al. (2011) . The approach focuses on the proportion of coarser pores that are occupied by finer sediments relative to a percolation threshold proportion (ω_c). If the proportion occupied is below ω_c, then the unoccupied coarser pores percolate. Otherwise they do not percolate. Following the ideas of Koltermann and Gorelick (1995) , the effective grain‐size term in the Kozeny‐Carman equation is calculated using the geometric mean if the unoccupied coarse pores percolate, and using the harmonic mean if otherwise. Following ideas of Esselburn et al. (2011) , this approach is implemented by evaluating the potential for grains in each size category to occupy pores among sediment of each larger‐size category. Application of these ideas to physical sediment models for sands and gravels, which have known k, indicates that a threshold does indeed exist. Results also suggest that the Kozeny‐Carman equation is robust and gives representative values for k, even though ω_c is not precisely known.     

Cation substitution in synthetic meridianiite (MgSO4·11H2O) II: variation in unit-cell parameters determined from X-ray powder diffraction data

We have prepared aqueous MgSO₄ solutions doped with various divalent metal cations (Ni²⁺, Zn²⁺, Mn²⁺, Cu²⁺, Fe²⁺, and Co²⁺) in proportions up to and including the pure end-members. These liquids have been solidified into fine-grained polycrystalline blocks of metal sulfate hydrate + ice by rapid quenching in liquid nitrogen. In a companion paper (Fortes et al., in Phys Chem Min 39) we reported the identification of various phases using X-ray powder diffraction, including meridianiite-structured undecahydrates, melanterite- and epsomite-structured heptahydrates, novel enneahydrates and a new octahydrate. In this work we report the changes in unit-cell parameters of these crystalline products where they exist over sufficient dopant concentrations. We find that there is a linear relationship between the rate of change in unit-cell volume as a function of dopant concentration and the ionic radius of the dopant cation; large ions such as Mn²⁺ produce a substantial inflation of the hydrates’ unit-cell volume, whereas smaller ions such as Ni²⁺ produce a modest reduction in unit-cell volume. Indeed, when the data for all hydrates are normalised (i.e., divided by the number of formula units per unit-cell, Z, and the hydration number, n), we find a quantitatively similar relationship for different values of n. Conversely, there is no relationship between the degree of unit-cell inflation or deflation and the limit to which a given cation will substitute into a certain hydrate structure; for example, Co²⁺ and Zn²⁺ affect the unit-cell volume of MgSO₄·11H₂O to a very similar degree, yet the solubility limits inferred in our companion paper are >60 mol. % Co²⁺ and <30 mol. % Zn²⁺.     

Assessment of Offshore New Jersey Sources of Beach Replenishment Sand by Diversified Application of Geologic and Geophysical Methods

Beach replenishment serves the dual purpose of maintaining a source of tourism and recreation while protecting life and property. For New Jersey, sources for beach sand supply are increasingly found offshore. To meet present and future needs, geologic and geophysical techniques can be used to improve the identification, volume estimation, and determination of suitability, thereby making the mining and manag ing of this resource more effective. Current research has improved both data collection and interpretation of seismic surveys and vibracore analysis for projects investigating sand ridges offshore of New Jersey. The New Jersey Geological Survey in cooperation with Rutgers University is evaluating the capabilities of digital seismic data (in addition to analog data) to analyze sand ridges. The printing density of analog systems limits the dynamic range to about 24 dB. Digital acquisition systems with dynamic ranges above 100 dB can permit enhanced seismic profiles by trace static correction, deconvolution, automatic gain scaling, horizontal stacking and digital filtering. Problems common to analog data, such as wave-motion effects of surface sources, water-bottom reverberation, and bubble-pulse-width can be addressed by processing. More than 160 line miles of digital high-resolution continuous profiling seismic data have been collected at sand ridges off Avalon, Beach Haven, and Barnegat Inlet. Digital multichannel data collection has recently been employed to map sand resources within the Port of New York New Jersey expanded dredge-spoil site located 3 mi offshore of Sandy Hook, New Jersey. Multichannel data processing can reduce multiples, improve signal-to-noise calculations, enable source deconvolution, and generate sediment acoustic velocities and acoustic impedance analysis. Synthetic seismograms based on empirical relationships among grain size distribution, density, and velocity from vibracores are used to calculate proxy values for density and velocity. The seismograms are then correlated to the digital seismic profile to confirm reflected events. They are particularly useful where individual reflection events cannot be detected but a waveform generated by several thin lithologic units can be recognized. Progress in application of geologic and geophysical methods provides advan tages in detailed sediment analysis and volumetric estimation of offshore sand ridges. New techniques for current and ongoing beach replenishment projects not only expand our knowledge of the geologic processes involved in sand ridge origin and development, but also improve our assessment of these valuable resources. These reconnaissance studies provide extensive data to the engineer regarding the suitability and quantity of sand and can optimize placement and analysis of vibracore samples.