Geophysical interpretation of a high-resolution seismic refraction profile in the Northern Apennines

A combined seismic and gravimetric interpretation in the Northern Apennines area (Italy) is presented. To the knowledge of the authors, this is one of the few attempts to apply tomographic methodology to a seismic refraction profile. This procedure, together with the classical interpretation for defining lower reflectors, led to the formulation of quite an accurate model of the upper crust. A gravity analysis was performed concurrently taking into account the seismic results at different depths which correspond to different frequency domains in the gravity signal. While the medium- and high-frequency patterns have been solved by trial-and-error, the regional trend has been modelled applying the collocation procedure to the gravity data.     

3D geoelectric tomography and archaeological applications1

Following a previous paper in which the principles of a 3D ground-surface tomographic processing of self-potential data were established, we extend the method to active source geoelectric surveying. The main purpose of the new tomographic approach is to obtain a physical image reconstruction of the induced electric charges distributed over buried resistivity discontinuities. The information is produced in a probabilistic sense, as the mathematical formulation underlying the method treats only the intrinsic physical nature of the generated electric field underground and the method of its ground-surface detection, independently of the geometry of the unknown structures. In practice, a 3D tomography is realized by cross-correlating a set of distributed electric-field ground-surface data with a scanning function, representing a unit positive point charge located anywhere in the lower half-space. The resolution of the method is tested on the synthetic response of a 3D structural simulation of an archaeological target, consisting of an infinitely resistive prismatic body immersed in a half-space, including surface inhomogeneities and layering. Finally, the field response of a 3D structure consisting of a hypogeal dromos-chamber tomb inside the Sabine Necropolis at Colle del Forno, close to Rome, is presented and discussed.     

Towards a Flux-Partitioning Procedure Based on the Direct Use of High-Frequency Eddy-Covariance Data

Scanlon and Sahu (Water Resour Res 44(10):W10418, 2008) proposed an interesting method to estimate assimilation, respiration, evaporation and transpiration directly using high-frequency eddy-covariance measurements. In this note we critically revise this method and, in particular, using the Descartes’ rule of sign, we show that one branch of solutions can be directly neglected reducing the analytical complexity of the procedure. We also discuss the stability of the results of the method with respect to the input parameters, especially to the water-use efficiency.     

L'angle de chute au sol de la grêle

Résumé

Cette étude présente des résultats expérimentaux sur les effets du vent et de l'échantillonnage sur la mesure de l'intensité des chutes de grêle, et suggère des thèmes de discus non pour l'Atelier.

L'angle moyen de chute des grêlons, mesuré à partir de la verticale, est un indice significatif de l'augmentation de l'énergie cinétique due à la vitesse du vent au sol. En Italie, au cours des années 1972–1975, 61% des observations révèlent un effet important des vents. Au cours d'un été de Grossversuch IV en Suisse, 41% des observations révèlent aussi de tels effets. Ces observations ont été faites à l’ aide de grêlimètres à cinq faces (hailcubes). On propose un plus grand effort pour rendre possible une estimation des effets du vent à l'aide de grélimètres horizontaux, peut être en utilisant, comme mesure principale, le rapport de la longueur sur la largeur des empreintes faites par les grêlons de la classe centrale de dimensions qui a touché les grêlimètres.

Des résultats sur des mesures juxtaposées du nombre de grêlons, par intervalle donnée de diamètres, et d'énergie cinétique sont aussi présentées. Ces mesures soulignent les erreurs dues à l'échantillonnage qui peuvent être considérables, spécialement pour les gros grêlons naturellement moins nombreux.     

Tectonics,sea-level changes and palaeoenvironments in the early Pleistocene of Rome (Italy)

The historical site of the Monte Mario lower Pleistocene succession (Rome, Italy) is an important marker of the Pliocene/Pleistocene boundary. Recently, the Monte Mario site was excavated and restudied. A spectacular angular unconformity characterizes the contact between the Monte Vaticano and the Monte Mario formations, which marks the Pliocene/Pleistocene boundary. Biostratigraphical analyses carried out on ostracod, foraminifer, and calcareous nannofossil assemblages indicate an Early Pliocene age (topmost Zanclean, 3.81–3.70 Ma) for the underlying Monte Vaticano Formation, whereas the Monte Mario Formation has been dated as early Pleistocene (Santernian, 1.66–1.59 Ma). Palaeomagnetic analyses point to C2Ar and C1r2r polarity chrons for the Monte Vaticano and the Monte Mario formations, respectively. The Monte Mario Formation consists of two obliquity-forced depositional sequences (MM1 and MM2) characterized by transgressive systems tracts of littoral marine environments at depths, respectively, of 40–80 m and 15–20 m. The data obtained from foraminifer and ostracod assemblages allow us to reconstruct early Pleistocene relative sea-level changes near Rome. At the Plio/Pleistocene transition, a relative sea-level drop of at least 260 m occurred, as a result of both tectonic uplift of the central Tyrrhenian margin and glacio-eustatic changes linked to early Pleistocene glaciation (Marine Isotope Stage 58).     

An analysis of debris-flow events in the Sardinia Island (Thyrrenian Sea, Italy)

On 6 December 2004, the Villagrande Strisaili area (middle-east Sardinia), was struck by debris flows; 330 mm of rainfall took place within 3 h with an hourly intensity of 120 mm, which is far more above than normal for the study area. In the urban center stony and driftwood deposits accounted for a total volume estimated as 10,000 m³. The event claimed huge amount of infrastructural loss and two human lives. According to the chronicle reports, the area experienced two debris-flow events in the last century. The present paper is the outcome of an intensive study of such debris-flow events including their physical processes and geomorphological effects through both field survey and laboratory analysis.     

Surface flow boundary conditions in modeling land subsidence due to fluid withdrawal

Land subsidence due to subsurface fluid (water, gas, oil) withdrawal is often predicted by either finite element or finite difference numerical models based on coupled poroelastic theory, where the soil is represented as a semi-infinite medium bounded by the traction-free (ground) surface. One of the variables playing a most important role on the final outcome is the flow condition used on the traction-free boundary, which may be assumed as either permeable or impermeable. Although occasionally justified, the assumption of no-flow surface seems to be in general rather unrealistic. A permeable boundary where the fluid pressure is fixed to the external atmospheric pressure appears to be more appropriate. This paper addresses the response, in terms of land subsidence, obtained with a coupled poroelastic finite element model that simulates a distributed pumping from a horizontal aquifer confined between two relatively impervious layers, and takes either a permeable boundary surface, i.e., constant hydraulic potential, or an impermeable boundary, i.e., a zero Neumann flow condition. The analysis reveals that land subsidence is rather sensitive to the flow condition implemented on the traction-free boundary. In general, the no-flow condition leads to an overestimate of the predicted ground surface settlement, which could even be 1 order of magnitude larger than that obtained with the permeable boundary.     

Preface

Preface

Preface     

The biodegradation efficiency on diesel oil by two psychrotrophic Antarctic marine bacteria during a two-month-long experiment

Two psychrotrophic bacterial strains isolated from Antarctic seawaters were investigated for their capability to degrade commercial diesel oil. The efficiency of hydrocarbon utilization was studied at 4 and 20 degrees C over a period of two-months. Strains were cultured in a mineral liquid medium supplemented with diesel oil as the sole source of carbon and energy. The viable counts for the bacterial abundance estimation and the culture extractions for the subsequent gas-chromatographic analysis were carried out simultaneously. The biodegradation efficiency was higher at 20 degrees C than at 4 degrees C for both strains and the decrease in hydrocarbon concentrations reached more than 85% after 60 days of incubation at 20 degrees C. Our results suggest the possible exploitation of these two bacterial strains in future biotechnological processes, directly as field-released micro-organisms both in cold and temperate contaminated marine environments.