Fundamental study for morphodynamic modelling: Sand mounds in oscillatory flows

Experiments on sand mounds in oscillatory flow, undertaken in controlled, large-scale laboratory conditions, have produced well-defined data sets for model comparison. Three bathymetries with different levels of submergence, including a surface-piercing case, were tested. The maximum slope was about 1:5.5. Sediment transport is due to bed load with ripple formation. The principal time-dependent bulk parameters are the vertical distance of the centre of gravity above the base and the volume of the mound. A semi-implicit finite-volume depth-averaged hydrodynamic model is used to drive morphodynamics, using van Rijn's sediment flux model generalized to take account of bed slope, and some justification is given for depth-averaged modeling in these conditions. Starting the model runs with the conditions at the end of the first cycle avoided initial atypical physical behaviour. In general good predictions were obtained with an angle of repose reduced from the standard value of about 30° for stationary beds to 15°. For these situations, morphodynamics was largely unaffected by a hydrodynamic roughness height in the range 2.5D₅₀ to 51D₅₀, with larger values accounting for ripple roughness. The reduced angle of repose may be physically expected with mobile beds but this specific value is only expected to be suited to this form of bed motion. In one case an exaggerated ripple formed near the top of the mound reducing agreement with experiment. For the submerged case with normal ripple structure excellent predictions were obtained. For the initially surface-piercing mound, the time of submergence was better predicted with a 30° angle of repose, presumably due to the prominent influence of the near stationary bed near the wet/dry interface, although long term predictions were better predicted with 15°. The occurrence of vortex shedding in the first cycle modeled was in agreement with experimental observation.     

Development of MSP430-based ultra-low power expandable underwater acoustic recorder

Reducing overall power consumption is core issue in low power, high sampling rate, large storage data loggers necessary for long-term underwater acoustics research and other applications. A low-power microprocessor MSP430 offers a solution for the development of long-term deployment remote systems. In this paper, we present a multi-MSP430, master-slave architecture to resolve the power limitation issue. The proposed design is scalable in nature. For every additional slave unit installed in the array, the data sampling and streaming rate can be increased proportionally. We demonstrate the advantages of this concept using a multi-channel underwater acoustic recorder with a 100 kHz sampling rate. The performance of the system is demonstrated by a field acoustic experiment in which the reflection coefficient of the seafloor is measured. The proposed architecture will be applicable to many underwater long-term deployment systems. With its flexibility in configuration and synchronization of multi-channel sampling, it also provides a simple architecture for the construction of hydrophone arrays.     

换道概率对交通系统动能的影响

基于跟车模型的特点,提出了跟车模型的动能变化公式,利用该公式研究换道概率对各车辆动能的影响.数值实验结果表明,换道概率和相对速度对各车辆动能产生较大影响,但换道概率和相对速度会分别降低其动能变化频率和幅度.此外,系统增加的平均动能会随着系统最大换道概率的增加而降低.     

Experimental Studies on Extraction of Modified Suction Caisson (MSC) in Sand by Reverse Pumping Water

A suction caisson can be extracted by applying reverse pumping water,which cannot be regarded as the reverse process of installation because of the dramatically different soil?structure interaction behavior.Model tests were first carried out in this study to investigate the extraction behavior of the modified suction caisson(MSC)and the regular suction caisson(RSC)in sand by reverse pumping water.The effects of the installation ways(suction-assisted or jacking installation)and the reverse pumping rate on the variations of the over-pressure resulting form reverse pumping water were investigated.It was found that neither the RSC nor the MSC can be fully extracted from sand.When the maximum extraction displacement is obtained,the hydraulic gradient of the sand in the suction caisson reaches the critical value,leading to seepage failure.In addition,the maximum extraction displacement decreases with the increasing reverse pumping rate.Under the same reverse pumping rate,the final extraction displacements for the RSC and MSC installed by suction are lower than those for the RSC and MSC installed by jacking.The final extraction displacement of MSC is almost equal to that of the RSC with the same internal compartment length.Based on the force equilibrium,a method of estimating the maximum extraction displacement is proposed.It has been proved that the proposed method can rationally predict the maximum extraction displacement and the corresponding over-pressure.     

Ultimate strength assessment of hull structural plate with pitting corrosion damnification under biaxial compression

It is well known that pitting corrosion occurring on surface of hull structural plate will surely result in a significant degradation of the ultimate strength of the hull structural plate. This report aims at development of an assessing formula for ultimate strength of hull plate with pitting corrosion damage under the biaxial in-plane compression loading. The ultimate strength assessment model that is in terms of the corroded volume loss was deduced in theory, and which was then completed through numerical experiment by employing nonlinear finite element analyses for series of corroded plate models. Meanwhile, pitting corrosion in actual ship hull was analyzed and simulated, which ensured that all the assumptions for the finite element model parameters were in accord with the actual hull plate with pitting corrosion damage. Furthermore, the effects of plate slenderness, the linear factors at the plate edges and the ratio between the transverse and the longitudinal in-plane stresses on the ultimate strength reduction related to the corroded volume loss were discussed. The ultimate strength assessment formula being in terms of corroded volume loss developed in this research is expected to be applicable to assess the ultimate strength of the hull structural plate with pitting corrosion damage.     

Diurnal variation of nitric oxide emission flux from a mangrove wetland in Zhangjiang River Estuary,China

The diurnal variation of nitric oxide (NO) emission fluxes from a Kandelia obovata and Avicennia marina mangrove wetland were studied in the Zhangjiang River Estuary Mangrove National Nature Reserve using a dynamic chamber-based technique and a chemiluminescent analyzer. Results from field experiments show that NO emission from K. obovata and A. marina sampling sites reached maximal values of 1.07 ng N m⁻² s⁻¹ and 1.23 ng N m⁻² s⁻¹, respectively after the night tide. Meanwhile NO emission maintained at a steady lower level in daytime for both wetland sites. In laboratory experiments, NO emission from the mangrove wetland soil samples treated with simulated tides in the darkness exhibited higher values than those in the light, therefore it seems that tides and darkness could increase NO emission from mangrove wetlands, while intensive light, high temperature, and dryness in the daytime decreased NO emission. Compared with K. obovata soil samples, the diurnal average NO emission rate of the A. marina site was significantly higher, which was closely related to relatively higher diurnal average CO₂ emission rate, soil available nitrogen content and soil net nitrification rate of the A. marina site. Moreover, soil samples of the A. marina site were more responsive to simulated tides and the addition of nitrogen than those of the K. obovata site.     

新一代区域海-气-浪耦合台风预报系统

依托国家重点基础研究（973）计划项目"上层海洋对台风的响应和调制机理研究",中国气象局上海台风研究所联合国家海洋局的相关单位,通过实施近海台风的外场观测科学试验、加强台风边界层（特别是海气相互作用）物理过程诊断分析及参数化方案等的研究,建立并改进了台风强度预报的海-气-浪耦合预报模式系统,并在此基础上发展了台风强度的集合预报技术,在历史典型台风个例和2016-2017年台汛期的业务化测试中表现出良好的预报性能。     

底栖有孔虫(Florilus decors)壳体微量元素/钙比值的LA-ICP-MS原位微区分析方法及应用——以长江口外海域为例

深海沉积物中有孔虫壳体的微量元素、同位素测试技术已较为成熟,而河口近海沉积物中有孔虫壳体元素微区测试却鲜有报道。本文报道了一种利用激光剥蚀电感耦合等离子体质谱（LA-ICP-MS）分析法测试取自长江口外沉积物中的有孔虫壳体元素/钙比值的技术,研究了氦气载气流量、能量密度、束斑大小、激光剥蚀频率等参数对测试结果的影响,优化了活体有孔虫原位分析方法。应用确定的测试条件对2016年7月取自长江口外的底栖有孔虫优美花朵虫样品（Florilus decors）进行测试,发现Mg、Sr等元素/钙比值在壳体不同位置上无显著差异,而Mn的数据较为离散,可能与有孔虫生长过程中经历的水环境及其变化有关。     

The application of cutting plus waterlogging to control Spartina alterniflora on saltmarshes in the Yangtze Estuary,China

Control and eradication of the exotic and invasive plant Spartina alterniflora within the Chongming Dongtan nature reserve, Shanghai, China, is vital for the management and conservation of the saltmarshes. A demonstration project was established using waterlogging and cutting to control this invasive species. Results from 2007 to 2008 showed that, although the managed waterlogging significantly reduced biomass and seed production of S. alterniflora at an early stage, the species subsequently showed rapid adaptation to the long-term waterlogging stress. Thus, managed waterlogging alone was insufficient for the effective eradication of S. alterniflora. However, managed waterlogging for around 3 months, combined with cutting the above-ground part of S. alterniflora at a key stage (flowering period in July), controlled and eradicated the plant successfully. Both the above-ground and below-ground parts of S. alterniflora were killed and the plants began to decompose after 3 months. Furthermore, there was no re-growth of the emergent part of S. alterniflora in the following years. However, once the impounded water was released restoring the natural hydrodynamic regime of the saltmarshes, the seeds and seedlings of S. alterniflora reinvaded the controlled site from the neighboring areas and the S. alterniflora community was re-established. Thus, after eradication of S. alterniflora, control measures should be maintained to prevent the re-establishment of S. alterniflora. The results of this demonstration project indicate a potentially useful and effective approach for the control and management of large-scale invasion by S. alterniflora on saltmarshes in the Yangtze Estuary, China.     

CMIP5模式对南海SST的模拟和预估

分析了32个CMIP5模式对南海历史海表温度(SST)的模拟能力和不同排放情景下未来SST变化的预估。通过检验各气候模式对南海历史SST增温趋势和均方差的模拟,发现大部分模式都能较好地模拟出南海20世纪历史SST的基本特征和变化规律,但也有部分模式的模拟存在较大偏差。尽管这些模拟偏差较大的模式对SST多模式集合平均的影响不大,但会增加未来情景预估的不确定性。剔除15个模式后,分析了南海SST在RCP26、RCP45和RCP85三种排放情景下的变化趋势,发现在未来百年呈明显的增温趋势,多模式集合平均的增温趋势分别为0.42、1.50和3.30℃/(100a)。这些增温趋势在空间上变化不大,但随时间并不是均匀变化的。在前两种排放情景下,21世纪前期的增温趋势明显强于后期,而在RCP85情景下,21世纪后期的增温趋势强于前期。