Metamorphic reactions in mesosiderites: origin of abundant phosphate and silica

The high modal abundances of merrillite [Ca₃(PO₄)₂] and tridymite in most mesosiderites are not the result of igneous fractionation but are attributed to redox reactions between silicates and P-bearing Fe-Ni metal within a limited T-fO₂ range at low pressure. The Emery mesosiderite is the most tridymite- and merrillite-rich mesosiderite so it is used as the model for this study. Examination of reactions in the system CaO-SiO₂-MgSiO₃-Fe-P-O indicate that essentially all of the present phosphorus in Emery should have been dissolved in the metallic portion (calculated to have contained 0.65 wt% P originally), and that it largely reacted to form phosphate. The thermodynamic calculations predict that the reactions would have occurred between 970°C, log fO₂ = ?16.5 and 1030°C, log fO₂ = ?15.0 for the range of phase compositions in Emery. A narrower range of conditions is expected for other mesosiderites. Phosphide (schreibersite) formed only later at temperatures < 600°C during slow cooling. The recalculated amounts of dissolved P and S in the metallic portion of Emery reduce the temperature of the metal liquidus to < 1350°C and the solidus to < 800°C. Thus mixing of liquid metal with cold silicates near the parent body's surface would not have resulted in substantial melting of the silicates but would have resulted in their metamorphism, which is consistent with the textural relationships observed in Emery. This scenario of redox reactions and redistributions of components between metal and silicates represents a new insight into the complexities of mesosiderite processing that helps unravel the mesosiderite history and recalculate their original components.     

High-Pressure Melting of Eclogite and the P-T-X History of Tonalitic to Trondhjemitic Zoisite-Pegmatites, Munchberg Massif, Germany

Zoisite-bearing high-pressure pegmatites from the MünchbergMassif, Germany, provide an excellent example of the characteristicsof the onset of metabasite melting at eclogite-facies conditions.The pegmatites were derived by partial melting of a mid-oceanridge basalt (MORB)-like eclogite at T 680°C/2·3GPa to 750°C/3·1 GPa, which produced small amountsof tonalitic to trondhjemitic melt. The melt concentrated locallyin isolated, small melt pockets and crystallized primary zoisiteas liquidus phase at P 2·3 GPa/680°C to 2·1GPa/750°C. Compositional zoning of pegmatite zoisite recordsan ensuing multi-stage uplift history with successive, discretecrystallization events at 1·4 ± 0·2 GPa/650–700°Cand 1·0 ± 0·1 GPa/620–650°C.Resorption textures indicate reheating and thermal perturbationof the whole system prior to each successive crystallizationevent. Final solidification of zoisite-pegmatites occurred at0·9 ± 0·1 GPa/620–650°C. Thedata suggest that isolated melt + zoisite crystal mush pocketsformed an integral part of the eclogite throughout uplift frommelt formation at T 680°C/2·3 GPa to 750°C/3·1GPa to final solidification at 0·9 GPa/620–630°C;that is, over a depth range of 45–60 km. The entire pegmatite-formingprocess was probably fluid conserving: fluid present duringmelt formation was trapped by fully or nearly water-saturatedsiliceous melts, whereas fluid liberated during pegmatite crystallizationinteracted with dehydrated eclogite-facies assemblages to formamphibolite-facies hydrous minerals. A set of empirical D^{melt/eclogite}values based on mean zoisite-pegmatite and eclogite compositionwere used to model the onset of partial high-pressure meltingof metabasites. KEY WORDS: adakite; high-pressure melting; pegmatite; trondhjemite; zoisite     

The year-long unprecedented European heat and drought of 1540 – a worst case

The heat waves of 2003 in Western Europe and 2010 in Russia, commonly labelled as rare climatic anomalies outside of previous experience, are often taken as harbingers of more frequent extremes in the global warming-influenced future. However, a recent reconstruction of spring–summer temperatures for WE resulted in the likelihood of significantly higher temperatures in 1540. In order to check the plausibility of this result we investigated the severity of the 1540 drought by putting forward the argument of the known soil desiccation-temperature feedback. Based on more than 300 first-hand documentary weather report sources originating from an area of 2 to 3 million km², we show that Europe was affected by an unprecedented 11-month-long Megadrought. The estimated number of precipitation days and precipitation amount for Central and Western Europe in 1540 is significantly lower than the 100-year minima of the instrumental measurement period for spring, summer and autumn. This result is supported by independent documentary evidence about extremely low river flows and Europe-wide wild-, forest- and settlement fires. We found that an event of this severity cannot be simulated by state-of-the-art climate models.     

A new geospatial overlay method for the analysis and visualization of spatial change patterns using object-oriented data modeling concepts

Traditional geographic information system (GIS)-overlay routines usually build on relatively simple data models. Topology is – if at all – calculated on the fly for very specific tasks only. If, for example, a change comparison is conducted between two or more polygon layers, the result leads mostly to a complete and also very complex from–to class intersection. A lot of additional processing steps need to be performed to arrive at aggregated and meaningful results. To overcome this problem a new, automated geospatial overlay method in a topologically enabled (multi-scale) framework is presented. The implementation works with polygon and raster layers and uses a multi-scale vector/raster data model developed in the object-based image analysis software eCognition (Trimble Geospatial Imaging, Munich, Germany). Advantages are the use of the software inherent topological relationships in an object-by-object comparison, addressing some of the basic concepts of object-oriented data modeling such as classification, generalization, and aggregation. Results can easily be aggregated to a change-detection layer; change dependencies and the definition of different change classes are interactively possible through the use of a class hierarchy and its inheritance (parent–child class relationships). Implementation is exemplarily shown for a change comparison of CORINE Land Cover data sets. The result is a flexible and transferable solution which is – if parameterized once – fully automated.     

Suitability of Existing Numerical Model Codes and Thermodynamic Databases for the Prognosis of Calcite Dissolution Processes in Near-Surface Sediments Due to a CO2 Leakage Investigated by Column Experiments

Among the risks of CO₂ storage is the potential of CO₂ leakage into overlaying formations and near-surface potable aquifers. Through a leakage, the CO₂ can intrude into protected groundwater resources, which can lead to groundwater acidification followed by potential mobilisation of heavy metals and other trace metals through mineral dissolution or ion exchange processes. The prediction of pH buffer reactions in the formations overlaying a CO₂ storage site is essential for assessing the impact of CO₂ leakages in terms of trace metal mobilisation. For buffering the pH-value, calcite dissolution is one of the most important mechanisms. Although calcite dissolution has been studied for decades, experiments conducted under elevated CO₂ partial pressures are rare. Here, the first study for column experiments is presented applying CO₂ partial pressures from 6 to 43 bars and realising a near-natural flow regime. Geochemical calculations of calcite dissolution kinetics were conducted using PHREEQC together with different thermodynamic databases. Applying calcite surface areas, which were previously acquired by N₂-BET or calculated based on grain diameters, respectively, to the rate laws according to Plummer et al. (Am J Sci 278:179–216, doi:10.2475/ajs.278.2.179, 1978) or Palandri and Kharaka (US Geol Surv Open file Rep 2004–1068:71, 2004) in the numerical simulations led to an overestimation of the calcite dissolution rate by up to three orders of magnitude compared to the results of the column experiments. Only reduction of the calcite surface area in the simulations as a fitting procedure allowed reproducing the experimental results. A reason may be that the diffusion boundary layer (DBL), which depends on the groundwater flow velocity and develops at the calcite grain surface separating it from the bulk of the solution, has to be regarded: The DBL leads to a decrease in the calcite dissolution rate under natural laminar flow conditions compared to turbulent mixing in traditional batch experiments. However, varying the rate constants by three orders of magnitudes in a field scale PHREEQC model simulating a CO₂ leakage produced minor variations in the pH buffering through calcite dissolution. This justifies the use of equilibrium models when calculating the calcite dissolution in CO₂ leakage scenarios for porous aquifers and slow or moderate groundwater flow velocities. However, the selection of the thermodynamic database has an impact on the dissolved calcium concentration, leading to an uncertainty in the simulation results. The resulting uncertainty, which applies also to the calculated propagation of an aquifer zone depleted in calcite through dissolution, seems negligible for shallow aquifers of approximately 60 m depth, but amounts to 35 % of the calcium concentration for aquifers at a depth of approximately 400 m.     

Variscan orogeny in Corsica: new structural and geochronological insights,and its place in the Variscan geodynamic framework

In Western Corsica, remnants of pre-batholitic lithological and metamorphic assemblages are preserved as km-scale septa enclosed within Lower Carboniferous to Early Permian plutons. Two groups of septa were recognized: (1) the Argentella and Agriates-Tenda fragments correspond to Neoproterozoic rocks deformed and metamorphosed during the Cadomian–Panafrican orogeny, and (2) the Zicavo, Porto-Vecchio, Solenzara–Fautea, Belgodère, Topiti, and Vignola fragments consist of Variscan metamorphic rocks. The lithological content and the main ductile deformation events for each septum are presented. In the Zicavo, Porto-Vecchio, and Topiti septa, a top-to-the-SW ductile shearing (D1 event) coeval with an amphibolite facies metamorphism is responsible for crustal thickening at ca 360 Ma. This main event was preceded by eclogite and granulite facies metamorphic events preserved as restites within migmatites dated at ca 345–330 Ma. A top-to-the-SE ductile shearing (D2 event) coeval with the crustal melting accommodated the exhumation of the D1 event. In contrast, the Belgodère segment is peculiar as it exhibits a top-to-the-E vergence, although retrogressed high-pressure rocks are also recognized. The pre-Permian fragments are arranged in four NW–SE-striking stripes that define a SW–NE zoning with (1) a Western domain in Topiti, Vignola, Zicavo, Porto-Vecchio, and Solenzara–Fautea; (2) a Neoproterozoic basement with its unconformable Early Paleozoic sedimentary cover in Argentella; (3) an Eastern metamorphic domain in Belgodère; (4) another Neoproterozoic basement with its Upper Paleozoic sedimentary cover in Agriates-Tenda. The Argentella basement is separated from the Western and Eastern domains by two sutures: S1 and S2. The Variscan Corsica represents the Eastern part of the Sardinia–Corsica–Maures segment. The comparison of this segment with other Variscan domains allows us to propose some possible correlations. We argue that the Western domain, Argentella, Belgodère, and Agriates-Tenda domains can be compared with the Southern Variscan belt exposed in French Massif Central–Southern Massif Armoricain, Armorica microblock, Léon block, respectively.     

Dynamic downscaling of global climate projections for Eastern Europe with a horizontal resolution of 7 km

Climate change is one of the key factors influencing the quantity and quality of water resources in hydrologically sensitive regions. In order to downscale global climate simulations from horizontal resolutions of about 125–200 km to about 7 km, a double nesting strategy was chosen. The modelling approach was implemented with the Regional Climate Model CCLM (COSMO-Climate Local Model) with a first nesting covering a central part of Europe and with a second nesting covering parts of Poland, Belarus, and the Ukraine. A control run—driven by global reanalysis data—was evaluated by comparing the model results with corresponding reference data. Long-term yearly and monthly mean differences of temperature and precipitation were statistically assessed. As reference data for the first nesting, the gridded CRU data set with a horizontal resolution of about 55 km was used. Station data of the NOAA and ECA databases were interpolated to provide an appropriate reference data set for the second nesting. Both nestings overestimated long-term yearly precipitation means. Seasonal evaluation of the first nesting showed positive precipitation biases for spring and winter months and negative biases in summer. Furthermore, differences in the spatial precipitation patterns occured, especially in the high mountain area of the Carpathians. The second nesting overestimated precipitation in spring and summer with smaller biases than in the first nesting. Long-term area means of temperature were properly reproduced. The first nesting showed an overestimation for all months with maximal deviations in summer and spring. In contrast, the second nesting was slightly too warm for summer and autumn and too cold for winter and spring.