The Pleistocene evolution of the East Antarctic Ice Sheet in the Prydz bay region: stable isotopic evidence from ODP Site 1167

Ocean Drilling Program Leg 188, Prydz Bay, East Antarctica is part of a larger initiative to explore the Cenozoic history of the Antarctic Ice Sheet through direct drilling and sampling of the continental margins. In this paper, we present stable isotopic results from Ocean Drilling Program (ODP) Site 1167 located on the Prydz Channel Trough Mouth Fan (TMF), the first Antarctic TMF to be drilled. The foraminifer-based δ¹⁸O record is interpreted along with sedimentary and downhole logging evidence to reconstruct the Quaternary glacial history of Prydz Bay and the adjacent Lambert Glacier Amery Ice Shelf System (LGAISS). We report an electron spin resonance age date of 36.9±3.3 ka at 0.45 m below sea floor and correlate suspected glacial–interglacial cycles with the global isotopic stratigraphy to improve the chronology for Site 1167. The δ¹⁸O record based on planktonic (Neogloboquadrina pachyderma (s.)) and limited benthic results (Globocassidulina crassa), indicates a trend of ice sheet expansion that was interrupted by a period of reduced ice volume and possibly warmer conditions during the early–mid-Pleistocene (0.9–1.38 Ma). An increase in δ¹⁸O values after 900 ka appears to coincide with the mid-Pleistocene climate transition and the expansion of the northern hemisphere ice sheet. The δ¹⁸O record in the upper 50 m of the stratigraphic section indicates as few as three glacial–interglacial cycles, tentatively assigned as marine isotopic stages (MIS) 16–21, are preserved since the Brunhes/Matuyama paleomagnetic reversal (780 ka). This suggests that there is a large unconformity near the top of the section and/or that there may have been few extreme advances of the ice sheet since the mid-Pleistocene climate transition resulting in lowered sedimentation rates on the Prydz Channel TMF. The stable isotopic record from Site 1167 is one of the few available from the area south of the Antarctic Polar Front that has been linked with the global isotopic stratigraphy. Our results suggest the potential for the recovery of useful stable isotopic records in other TMFs.     

The granulometrical characteristics of a slowly-moving dust cloud

A torn-up road offered the opportunity to sample a dust cloud continuously at different heights during a time interval of 51 hours. In particular the granulometrical characteristics of the dust caught were investigated. It appears that if the air layer in the vicinity of a dust cloud is not too turbulent, the cloud will be clearly granulometrically stratified. The coarse material moves chiefly at the bottom of the cloud, whereas the fine material will occur both at the bottom and at the top. The experiment also shows that the higher the dust in the cloud, the worse it is sorted. Above a critical height, however, the degree of sorting increases again. The variation of the mean dust diameter d₅₀, as a function of the height z, can be expressed in a simple semi-logarithmic equation. The variation of the dust quantity G, as a function of the height z, can also be expressed in a semi-logarithmic form but the correlation is higher when a power equation is used. The ratio of fine silt to coarse silt seems to vary parabolically with height. One can only speak of an optimal transport height in the case of particles > 16 μm. For finer particles, the turbulence of a normal air stream is usually high enough to carry the particles anywhere in the dust cloud, so that one can no longer speak of an optimal transport height. The granulometrical border between aeolian transport in saltation and aeolian transport in suspension lies, according to the results of the experiment, at a diameter of about 63 μm.     

Scaling of oblique impacts in frictional targets: Implications for crater size and formation mechanisms

Almost every meteorite impact occurs at an oblique angle of incidence, yet the effect of impact angle on crater size or formation mechanism is only poorly understood. This is, in large part, due to the difficulty of inferring impactor properties, such as size, velocity and trajectory, from observations of natural craters, and the expense and complexity of simulating oblique impacts using numerical models. Laboratory oblique impact experiments and previous numerical models have shown that the portion of the projectile’s kinetic energy that is involved in crater excavation decreases significantly with impact angle. However, a thorough quantification of planetary-scale oblique impact cratering does not exist and the effect of impact angle on crater size is not considered by current scaling laws. To address this gap in understanding, we developed iSALE-3D, a three-dimensional multi-rheology hydrocode, which is efficient enough to perform a large number of well-resolved oblique impact simulations within a reasonable time. Here we present the results of a comprehensive numerical study containing more than 200 three-dimensional hydrocode-simulations covering a broad range of projectile sizes, impact angles and friction coefficients. We show that existing scaling laws in principle describe oblique planetary-scale impact events at angles greater than 30° measured from horizontal. The displaced mass of a crater decreases with impact angle in a sinusoidal manner. However, our results indicate that the assumption that crater size scales with the vertical component of the impact velocity does not hold for materials with a friction coefficient significantly lower than 0.7 (sand). We found that increasing coefficients of friction result in smaller craters and a formation process more controlled by impactor momentum than by energy.     

Multi-scale aquifer characterization and groundwater flow model parameterization using direct push technologies

Direct push (DP) technologies are typically used for cost-effective geotechnical characterization of unconsolidated soils and sediments. In more recent developments, DP technologies have been used for efficient hydraulic conductivity (K) characterization along vertical profiles with sampling resolutions of up to a few centimetres. Until date, however, only a limited number of studies document high-resolution in situ DP data for three-dimensional conceptual hydrogeological model development and groundwater flow model parameterization. This study demonstrates how DP technologies improve building of a conceptual hydrogeological model. We further evaluate the degree to which the DP-derived hydrogeological parameter K, measured across different spatial scales, improves performance of a regional groundwater flow model. The study area covers an area of ~60 km² with two overlying, mainly unconsolidated sand aquifers separated by a 5–7 m thick highly heterogeneous clay layer (in north-eastern Belgium). The hydrostratigraphy was obtained from an analysis of cored boreholes and about 265 cone penetration tests (CPTs). The hydrogeological parameter K was derived from a combined analysis of core and CPT data and also from hydraulic direct push tests. A total of 50 three-dimensional realizations of K were generated using a non-stationary multivariate geostatistical approach. To preserve the measured K values in the stochastic realizations, the groundwater model K realizations were conditioned on the borehole and direct push data. Optimization was performed to select the best performing model parameterization out of the 50 realizations. This model outperformed a previously developed reference model with homogeneous K fields for all hydrogeological layers. Comparison of particle tracking simulations, based either on the optimal heterogeneous or reference homogeneous groundwater model flow fields, demonstrate the impact DP-derived subsurface heterogeneity in K can have on groundwater flow and solute transport. We demonstrated that DP technologies, especially when calibrated with site-specific data, provide high-resolution 3D subsurface data for building more reliable conceptual models and increasing groundwater flow model performance.     

Groundwater flow and contaminant transport modelling at an air weapons range

Numerical modelling was done at the Cold Lake Air Weapons Range, Canada, to test whether the dissolved RDX and nitrate detected in groundwater come from the same sources, and to predict whether contamination poses a threat to the surface water receptors near the site. Military live fire training activities may indeed pose a risk of contamination to groundwater resources, however field investigations on military bases are quite recent, and little information is available on the long-term behaviour of munition residues related contaminants. Very limited information was available about the contaminant source zones, which were assigned based on our knowledge of current training activities. The RDX plume was well represented with the model, but the heterogeneous distribution of nitrate concentrations was more difficult to reproduce. It was nonetheless determined that both contaminants originate from the same areas. According to the model, both contaminants should reach the nearby river, but concentrations in the river should remain very low if the source zone concentration does not change. Finally, the model allowed the recommendation of a new location for the main bombing target, which would offer added protection to the river and the lake into which it flows.     

Colloidal arsenic composition from abandoned gold mine tailing leachates in Nova Scotia,Canada

Asymmetric-Flow Field-Flow Fractionation (AsFlFFF) coupled to an inductively coupled plasma-mass spectrometer (ICP-MS) was used to determine whether colloidal As exists in mine tailings from abandoned Au mine sites in Nova Scotia. Using this technique, the chemical composition and the size of the colloidal material was determined. Tailings samples were collected from the sites and leachates were analyzed. The resulting fractograms showed the presence of colloidal As. Arsenic co-elutes with Fe and Al suggesting that the As is associated with colloids containing these elements. The colloidal material present in the samples has a calculated median size of 7 nm. The leachates were also analyzed for totalAs, Fe and Al using ICP-MS. The colloidal fraction was determined to account for approximately 20% of the total dissolved As present in these samples. Dissolved As concentrations at the selected mine sites are very high and the arbitrary cutoff for dissolved still incorporates colloidal material. Therefore. it is important to distinguish between truly dissolved and colloidal As as the speciation will affect the toxicity and mobility of As at these locations.     

Applications of particle-tracking techniques to bank infiltration: a case study from El Paso,Texas, USA

This paper presents results of a small scale study that utilized particle-tracking techniques to evaluate transport of river water through an alluvial aquifer in a bank infiltration testing site in El Paso, Texas, USA. The particle-tracking survey was used to better define filtration parameters. Several simulations were generated to allow visualization of the effects of well placement and pumping rate on flow paths, travel time, the size of the pumping influence zone, and proportion of river-derived water and groundwater mixing in the pumping well. Simulations indicate that migration of river water into the aquifer is generally slow. Most water does not arrive at the well by the end of an 18-day pumping period at 0.54 m³/min pumping rate for a well located 18 m from the river. Forty-four percent of the water pumped from the well was river water. The models provided important information needed to design appropriate sampling schedules for bank filtration practices and ensured meeting adequate soil-retention times. The pumping rate has more effect on river water travel time than the location of the pumping well from the river. The examples presented in this paper indicate that operating the pumping well at a doubled distance from the river increased the time required for the water to travel to the well, but did not greatly change the capture zone.