Land cover dynamics in Garhwal Himalayas — a case study of balkhila sub-watershed

The present paper focuses on land cover dynamics pattern in Balkhila sub-watershed situated in Garhwal Himalayas. This study contributes example from human shaped ecosystem in mountainous regions where fragmentation of natural resources is active. The remote sensing and GIS has been used to understand the land cover dynamics along the topography. The results report that the land cover dynamics is dependent on the aspect due to sun illumination. The altitude and slope are no more a barrier for resource extraction and the human activity zone is shifting towards higher altitudes and slopes. The changes are also defined along the road and settlements.     

An automated seamless mosaicing system of multi-charge coupled devices of panchromatic data

Panchromatic data of pixel resolution 5.8 m obtained from IRS-1C and IRS-1D satellites proved to be very useful for mapping purposes. One of the popular data product is the 70 km swath mosaic which is covered by a combination of 3 CCD line sensors, each with 4096 pixels. Each CCD-line sensor with different imaging times causes geometric problems of mosaicing three strips data together. In this paper, we propose the details of the design elements of system that caters to the need for accurate and automatic multi strip image registration without any second resampling of the data. The systematic geometric correction grid mapping is improved to facilitate accurate mosaicing by automatic image registration task that makes use of the overlap data within image strips and image registration is achieved up to sub-pixel level.     

Forest cover mapping of East district,Sikkim using IRS-1A LISS II satellite data

Remote sensing techniques have been applied to classify tour density classes within each of the forest type along with other major landuse/landcover classes in the East district, Sikkim using IRS-1A LISS II satellite data pertaining to the period of November, 1988. The shadow problem in rugged terrain and difficulty in acquiring cloud free data for different seasons pose problems to achieve considerable mapping accuracy. In the present study, the forests of the district were delineated through supervised classification techniques using maximum likelihood algorithm into five forest types as sal forests, subtropical broad-leaved forests, Himalayan wet temperate forests, Rhododendron forests and alpine forests. The alpine forests were further stratified into two categories as moist alpine scrub and dry alpine scrub. The statistical data obtained from the present study shows that 55.47 percent of the total geographical area of the East district was under forest cover. An overall accuracy of more than 85 percent in correctly delineating forest classes was achieved.     

The GPS Toolbox

The GPS Toolbox is dedicated to highlighting algorithms utilized by GPS engineers and scientists. If you have an interesting algorithm you would like to share with our readers or if you have a topic you would like to see covered in a future column, contact us at gps-toolbox@ngs.noaa.gov. To comment on the algorithms presented here, or to leave a request for an algorithm you may be looking for, visit our Web site (http://www.ngs.noaa.gov/gps-toolbox). ? 2000 John Wiley & Sons, Inc.     

Determination of failure probabilities of flood defence systems with improved dynamic bounds method

In this paper, we describe the computational framework of a novel method for solving the challenging problem of probabilistic finite elements. The method is called Improved Dynamic Bounds (IDB) and was developed recently to improve the efficiency of the dynamic bounds. The IDB is used in finite element numerical models to calculate time-dependent failure analyses of structures. In applications, the IDB can speed up the overall simulation process by several orders of magnitude. In applications controlled by two influential variables (e.g, two-dimensional problem), the computational efficiency is improved by a factor of 769 according to Rajabalinejad (2009). Applications of IDB indicate the method is most efficient for problems where the number of influential variables are limited. This is often the case for geotechnical and coastal flood defence systems. The IDB method is applied in this paper to the 17th Street Flood Wall, a component of the flood defence system (levee infra-structure) that failed during the Hurricane Katrina, to calculate the failure probability of an I-wall.     

Variation in Coronal Activity from Solar Cycle 24 Minimum to Maximum Using Three-Dimensional Reconstructions of the Coronal Electron Density from STEREO/COR1

Three-dimensional electron density distributions in the solar corona are reconstructed for 100 Carrington rotations (CR 2054?–?2153) during 2007/03?–?2014/08 using the spherically symmetric method from polarized white-light observations with the inner coronagraph (COR1) onboard the twin Solar Terrestrial Relations Observatory (STEREO). These three-dimensional electron density distributions are validated by comparison with similar density models derived using other methods such as tomography and a magnetohydrodynamics (MHD) model as well as using data from the Solar and Heliospheric Observatory (SOHO)/Large Angle and Spectrometric Coronagraph (LASCO)-C2. Uncertainties in the estimated total mass of the global corona are analyzed based on differences between the density distributions for COR1-A and -B. Long-term variations of coronal activity in terms of the global and hemispheric average electron densities (equivalent to the total coronal mass) reveal a hemispheric asymmetry during the rising phase of Solar Cycle 24, with the northern hemisphere leading the southern hemisphere by a phase shift of 7?–?9 months. Using 14 CR (\(\approx13\)-month) running averages, the amplitudes of the variation in average electron density between Cycle 24 maximum and Cycle 23/24 minimum (called the modulation factors) are found to be in the range of 1.6?–?4.3. These modulation factors are latitudinally dependent, being largest in polar regions and smallest in the equatorial region. These modulation factors also show a hemispheric asymmetry: they are somewhat larger in the southern hemisphere. The wavelet analysis shows that the short-term quasi-periodic oscillations during the rising and maximum phases of Cycle 24 have a dominant period of 7?–?8 months. In addition, it is found that the radial distribution of the mean electron density for streamers at Cycle 24 maximum is only slightly larger (by \(\approx30\%\)) than at cycle minimum.     

Evidence for the occurrence of hydrogeochemical processes in the groundwater of Khoy plain,northwestern Iran,using ionic ratios and geochemical modeling

Rapid population growth, industrialization, and agricultural expansion in the Khoy area (northwestern Iran) have led to its dependence on groundwater and degradation of groundwater quality. This study attempts to decipher the major processes and factors that degrade the groundwater quality of the Khoy plain. For this purpose, 54 groundwater samples from unconfined and confined aquifers of the plain were collected in July 2017 and analyzed for major cations and anions (Na, K, Ca, Mg, HCO₃, SO_4, and Cl), minor ions (NO₃ and F), and Al. Magnesium and bicarbonate were identified as the dominant cation and anion, respectively. Several ionic ratios and geochemical modeling using PHREEQC indicated that the most important hydrogeochemical processes to affect groundwater quality in the plain were weathering and dissolution of evaporitic and silicate minerals, mixing, and ion exchange. There were smaller effects from evaporation and anthropogenic factors (e.g., industries). Results showed that the high salinity of the groundwater in the northeast area of the plain was due to the high solubility of the evaporitic minerals, e.g., halite and gypsum. Reverse ion exchange and the contribution of mineral dissolution were more significant than ion exchange in the northeastern part of the plain. Elevated salinity of the groundwater in the southeast was attributed mostly to reverse ion exchange and somewhat to evaporation.     

Distribution of Indus born mica along Gulf of Kachchh coast: Implications in understanding current dynamics

Indus is one of the major sources of sediments to the Gulf of Kachchh. Yet only its <63 micron fraction is studied in detail with regards to the offshore current dynamics. Hence here we present our study on characteristic signature of the Indus sediment load (i.e. mica minerals) in >63 micron size fraction along the coast of Gulf of Kachchh. The spatial distribution of mica minerals along the Gulf of Kachchh coast was studied which showed in general decreasing trend as we move along the northern and southern coast of the Gulf of Kachchh but, an increase in amount near the southern mouth at Okha. The study shows that the earlier proposed tidal barrier is ineffective in restricting movement of mica across the mouth of the gulf due to its characteristic transport mechanism. Also the presence of mudflats along the gulf of Kachchh coast plays a vital role as sediment receptors in the active sediment transport processes and mica minerals prove to be a promising simple tracer in studying the Indus born sediments in the region.     

Computing the Sensitivity Kernels for 2.5-D Seismic Waveform Inversion in Heterogeneous,Anisotropic Media

2.5-D modeling and inversion techniques are much closer to reality than the simple and traditional 2-D seismic wave modeling and inversion. The sensitivity kernels required in full waveform seismic tomographic inversion are the Fréchet derivatives of the displacement vector with respect to the independent anisotropic model parameters of the subsurface. They give the sensitivity of the seismograms to changes in the model parameters. This paper applies two methods, called ‘the perturbation method’ and ‘the matrix method’, to derive the sensitivity kernels for 2.5-D seismic waveform inversion. We show that the two methods yield the same explicit expressions for the Fréchet derivatives using a constant-block model parameterization, and are available for both the line-source (2-D) and the point-source (2.5-D) cases. The method involves two Green’s function vectors and their gradients, as well as the derivatives of the elastic modulus tensor with respect to the independent model parameters. The two Green’s function vectors are the responses of the displacement vector to the two directed unit vectors located at the source and geophone positions, respectively; they can be generally obtained by numerical methods. The gradients of the Green’s function vectors may be approximated in the same manner as the differential computations in the forward modeling. The derivatives of the elastic modulus tensor with respect to the independent model parameters can be obtained analytically, dependent on the class of medium anisotropy. Explicit expressions are given for two special cases—isotropic and tilted transversely isotropic (TTI) media. Numerical examples are given for the latter case, which involves five independent elastic moduli (or Thomsen parameters) plus one angle defining the symmetry axis.