Zielvorgaben für Pflanzenschutzmittelwirkstoffe und andere Schadstoffe in Oberflächengewässern

Quality Targets for Pesticides and Other Pollutants in Surface Waters Surface waters are not only adversely affected by industrial and municipal wastewaters but also by diffuse sources. For the control of the ecological water quality, so‐called quality targets are set. The quality targets are threshold concentrations for hazardous substances related to the protected goods like water ecosystems, drinking water supply, sediments, or fishing. In this paper, quality targets for the protection of aquatic life in surface waters were derived on the basis of a concept developed by the International Commission for the Protection of the Rhine (Internationale Kommission zum Schutze des Rheins – IKSR). The quality targets for the selected hazardous substances, which mainly belong to the chemical class of pesticides, were calculated using ecotoxicological results for species of bacteria, algae, fish, and small crustaceans, as the four trophic standards of the water ecosystem. In cooperation with the Federal Environmental Agency (Umweltbundesamt – UBA) the effect data were taken from ecotoxicological data bases. According to the concept of the IKSR, the lowest test result for the most sensitive species was multiplied by an assessment factor. This proceeding concerns the difficulty in describing the complex interactions in water ecosystems with toxicity data of single laboratory experiments for a few organisms. For seven pesticides quality targets below 0.1 μg/L were proposed. These results show that the ecotoxicologically based quality targets might be even lower than the limit values for pesticides in drinking water of 0.1 μg/L. But for most of the substances the determined values are significantly higher. The great concentration range of quality targets demonstrates distinctly that one standard concentration for all pesticides could not be given with regard to the different effects on aquatic organisms.     

Investigation of a hybrid polygonal finite element formulation for confined and unconfined seepage

This study presents a formulation for field problems using hybrid polygonal finite elements, taking steady state seepage through a porous material as the focus. We make comparisons with a conventional finite element formulation based on a single primary variable, focussing on the advantages of the hybrid formulation in terms of flux field accuracy and extension to convex polygonal shaped elements. For the unconfined case, we adopt a head dependent hydraulic conductivity that does not require remeshing. The performance of the hybrid polygonal element formulation is demonstrated through a series of numerical examples. The results show a sensitivity of the location of the free surface in unconfined seepage to mesh configuration for hybrid quadrilateral meshes with various aspect ratios, but not for hybrid polygonal meshes with various orientations and irregularity. Examination of the free surface location results for several conforming shape function options shows an insensitivity to choice of interpolation function, provided that it conforms with the assumptions in the formulation. Copyright © 2016 John Wiley & Sons, Ltd.     

Two‐phase dynamic analysis by material point method

This paper extends the material point method to analyze coupled dynamic, two‐phase boundary‐valued problems via a velocity formulation, in which solid and fluid phase velocities are the variables. Key components of the proposed approach are the adoption of Verruijt's sequence of update steps when integrating over time and the enhancement of volumetric strains. The connection between fractional step method and the time‐stepping algorithm presented in this paper is addressed. Enhancement of volumetric strains allows lower order variations in pressure and mitigates spurious pressure fields and locking that plague low‐order finite‐element implementations. A stress averaging technique to smoothen stress variations is proposed, and the local damping procedure adopted by FLAC is extended to handle two‐phase problems. Special Kelvin‐Voigt boundaries are developed to suppress reflections at artificial boundaries. Idealized examples are presented to demonstrate the capability of the proposed framework to accurately capture the physics of wave propagation, consolidation and wave attack on a sea dike. Copyright © 2012 John Wiley & Sons, Ltd.     

MODIS Derived Equilibrium Line Altitude Estimates for Purogangri Ice Cap,Tibetan Plateau,and their Relation to Climatic Predictors (2001–2012)

The variation of the equilibrium line altitude can be used as an indicator for glacier mass balance variability. Snow lines at the end of the ablation period are suitable proxies for the annual equilibrium line altitude on glaciers. We investigate snow lines at Purogangri ice cap on the central Plateau in order to study the interannual variability of glacier mass balance. Datasets of the daily Moderate Resolution Imaging Spectroradiometer snow product MOD10A1 were used to infer transient snow line variability during 2001–2012 and to derive regional‐scale, annual equilibrium line altitude. The Moderate Resolution Imaging Spectroradiometer snow albedo embedded within the snow product was compared with high‐resolution Landsat imagery. An albedo threshold was established to differentiate between ice and snow and the 13th percentile of the altitudes of snow‐covered pixels was chosen to represent the snow line altitude. The second maximum of the snow line altitudes in the ablation period was taken as a proxy for the annual equilibrium line altitude. A linear correlation analysis was carried out (1) between interannual variability of the equilibrium line altitude at Purogangri ice cap and various climate elements derived from the High Asia Reanalysis, and (2) between interannual variability of the equilibrium line altitude and the circulation indices North Atlantic Oscillation and Indian Summer Monsoon. Results suggest that air temperature and meridional wind speed above ground in July, as well as the lower tropospheric zonal wind in June and August play a crucial role in the development of the annual equilibrium line altitude.     

Preconditioning effects of intermittent stream flow on leaf litter decomposition

Autumnal input of leaf litter is a pivotal energy source in most headwater streams. In temporary streams, however, water stress may lead to a seasonal shift in leaf abscission. Leaves accumulate at the surface of the dry streambed or in residual pools and are subject to physicochemical preconditioning before decomposition starts after flow recovery. In this study, we experimentally tested the effect of photodegradation on sunlit streambeds and anaerobic fermentation in anoxic pools on leaf decomposition during the subsequent flowing phase. To mimic field preconditioning, we exposed Populus tremula leaves to UV–VIS irradiation and wet-anoxic conditions in the laboratory. Subsequently, we quantified leaf mass loss of preconditioned leaves and the associated decomposer community in five low-order temporary streams using coarse and fine mesh litter bags. On average, mass loss after approximately 45 days was 4 and 7% lower when leaves were preconditioned by irradiation and anoxic conditions, respectively. We found a lower chemical quality and lower ergosterol content (a proxy for living fungal biomass) in leaves from the anoxic preconditioning, but no effects on macroinvertebrate assemblages were detected for any preconditioning treatment. Overall, results from this study suggest a reduced processing efficiency of organic matter in temporary streams due to preconditioning during intermittence of flow leading to reduced substrate quality and repressed decomposer activity. These preconditioning effects may become more relevant in the future given the expected worldwide increase in the geographical extent of intermittent flow as a consequence of global change.     

Erratum: Trace Elements in Sediments and Mussels – Spatial Distribution,Chemical Partitioning,and Risk Assessment

Sediment samples were collected from 30 different locations in Abu Qir Bay (Mediterranean Sea), East Alexandria, Egypt and analyzed for trace elements. The highest concentrations of most of the elements were observed in the nearshore stations in the vicinity of the major anthropogenic activities as industrial settlements, wastewater discharges, and agricultural drainage. In addition, mussel samples of Mactra corallina and Tapes decussata were collected corresponding to the sediment samples. Concentrations of As, Cd, Cr, Mn, and Zn in the mussel tissues were higher than concentrations in sediments, thus indicating their relatively high bioavailability. Sequential extraction procedure was performed on selected sediment samples. Significant correlations were observed between the concentrations of Cu, Mn, Pb, and Zn in the exchangeable fraction of the sediments and the corresponding tissues of M. corallina. The output of the risk assessment applied on the sediments revealed that adverse ecological effects to benthic species could occur and that a higher level of risk is expected from the exposure to Cd, Cr, Hg, and Zn. No adverse carcinogenic or non‐carcinogenic human health effects are expected from the consumption of the two mussel species from Abu Qir Bay.     

Eutrophication assessment of the Baltic Sea Protected Areas by available data and GIS technologies

Concerning increased degradation of marine ecosystems, there is a great political and institutional demand for an array of different tools to restore a good environmental status. Thereby, eutrophication is acknowledged as one of the major human induced stressors which has to be monitored and reduced. The present study concentrates on an assessment of the eutrophication status of the Baltic Sea Protected Areas by use of available data and GIS technologies. Two geodata layers were used for analysis: (1) a map on the eutrophication status of the Baltic Sea generated by the Helsinki Commission applying the HELCOM Eutrophication Assessment Tool (HEAT), and (2) modelled data on atmospheric nitrogen deposition made available by the European Monitoring and Evaluation Programme (EMEP). The results yielded comprehensive and conclusive data indicating that most of the BSPAs may be classified as being 'affected by eutrophication' and underlining the need to decrease the overall emissions of nutrients.     

Carbonate recrystallisation and organic matter maturation in heat-affected sediments from the Shaban Deep,Red Sea

Parasound profiles across the Shaban Deep in the Red Sea indicate turbiditic transport of surface sediments from the topographic height (basalt ridge) into the interior of the deep. This is supported by petrographical and (isotope-) geochemical evidence in the East Basin of the Shaban Deep where the presence of variable mixtures of authochtonous and allochthonous sediment compounds had been found.The uppermost 170 cm of both sediment cores 17008-1 and 17009-3 reveal “normal” stable oxygen isotope values for the planktonic foraminifera Globigerinoides ruber near ?1‰ which is indicative for carbonate formation in Red Sea surface water around 27 °C. However, below 182 cm in core 17008-1 highly variable δ ¹⁸O values for G. ruber between 0.26 and ?10.68‰ occur which are not the result of temperature-controlled oxygen isotope fractionation between foraminiferal carbonate and Red Sea surface water. The lowest δ¹⁸O values of ?10.68‰ measured for highly-altered foraminifera shells suggests carbonate precipitation higher than 90 °C.Organic petrographical observations show a great diversity of marine-derived macerals and terrigenous organic particles. Based on petrographical investigations sediment core 17008-1 can be subdivided in intervals predominantly of authochtonous character (i.e. 1, 3, 5 corresponding to core depths 0–170 cm, 370–415 cm, 69–136 cm), and allochthonous/thermally altered character (e.g. 2 and 4 corresponding to core depths 189–353 cm and 515–671 cm). Allochthonous/thermally altered material displays a wide to an extremely wide range of maturities (0.38–1.42% R_r) and also natural coke particles were found.Similarly, the organic geochemical and pyrolysis data indicate the predominance of well-preserved, immature algal and bacterial remains with a minor contribution of land plant material. Sediments below 170 cm (core 17008-1) contain contributions of re-sedimented pre-heated material most likely from the area of the basaltic ridge. This is documented by individual coke particles reduced hydrogen indices and elevated T_max values up to 440 °C.An “oil-type” contribution (evidenced by mature biomarkers, hopene/hopane ratios, elevated background fluorescence, n-alkane distribution) is also present in the sediments which most likely originated at greater depth and impregnated the surface sediments.The heat source responsible for recrystallisation of foraminiferal carbonate and maturation of organic particles in Shaban Deep sediments most likely is attributed to modern basalt extrusions which now separate the Shaban Deep subbasins.     

Radio-colouration of diamond: a spectroscopic study

We have undertaken a study of the common green or orange-brown spots at the surface of rough diamond specimens, which are caused by alpha particles emanating from radioactive sources outside the diamond. Richly coloured haloes represent elevated levels of structural damage, indicated by strong broadening of the main Raman band of diamond, intense strain birefringence, and up-doming of spots due to their extensive volume expansion. Green radio-colouration was analogously generated through the irradiation of diamond with 8.8 MeV helium ions. The generation of readily visible radio-colouration was observed after irradiating diamond with ≥10¹⁵ He ions per cm². The accumulation of such a high number of alpha particles requires irradiation of the diamond from a radioactive source over long periods of time, presumably hundreds of millions of years in many cases. In the samples irradiated with He ions, amorphisation was observed in volume areas where the defect density exceeded 5 × 10^?3 Å^?3 (or 0.03 dpa; displacements per target atom). In contrast, graphitisation as a direct result of the ion irradiation was not observed. The green colouration transformed to brown at moderate annealing temperatures (here 450 °C). The colour transformation is associated with only partial recovery of the radiation damage. The colour change is mainly due to the destruction of the GR1 centre, explained by trapping of vacancies at A defects to form the H3 centre. An activation energy of ~2.4 ± 0.2 eV was determined for the GR1 reduction. The H3 centre, in turn, causes intense yellowish-green photoluminescence under ultraviolet illumination. Radio-colouration and associated H3 photoluminescence are due to point defects created by the ions irradiated, whereas lattice ionisation is of minor importance. This is concluded from the depth distribution of the colouration and the photoluminescence intensity (which corresponds to the defect density but not the ionisation distribution pattern). The effect of the implanted He ions themselves on the colour and photoluminescence seems to be negligible, as radio-colouration and H3 emission were analogously produced through irradiation of diamond with C ions. The photoluminescence emission becomes observable at extremely low defect densities on the order of 10^?6 Å^?3 (or 0.000006 dpa) and is suppressed at moderate defect densities of ~5 × 10^?4 Å^?3 (or ~0.003 dpa). Intensely brown-coloured diamond hence does not show the H3 emission anymore. Anneals up to 1,600 °C has reduced considerably irradiation damage and radio-colouration, but the structural reconstitution of the diamond (and its de-colouration) was still incomplete.     

Early Holocene M~6 explosive eruption from Plosky volcanic massif (Kamchatka) and its tephra as a link between terrestrial and marine paleoenvironmental records

We report tephrochronological and geochemical data on early Holocene activity from Plosky volcanic massif in the Kliuchevskoi volcanic group, Kamchatka Peninsula. Explosive activity of this volcano lasted for ~1.5 kyr, produced a series of widely dispersed tephra layers, and was followed by profuse low-viscosity lava flows. This eruptive episode started a major reorganization of the volcanic structures in the western part of the Kliuchevskoi volcanic group. An explosive eruption from Plosky (M~6), previously unstudied, produced tephra (coded PL2) of a volume of 10–12 km³ (11–13 Gt), being one of the largest Holocene explosive eruptions in Kamchatka. Characteristic diagnostic features of the PL2 tephra are predominantly vitric sponge-shaped fragments with rare phenocrysts and microlites of plagioclase, olivine and pyroxenes, medium- to high-K basaltic andesitic bulk composition, high-K, high-Al and high-P trachyandesitic glass composition with SiO₂ = 57.5–59.5 wt%, K₂O = 2.3–2.7 wt%, Al₂O₃ = 15.8–16.5 wt%, and P₂O₅ = 0.5–0.7 wt%. Other diagnostic features include a typical subduction-related pattern of incompatible elements, high concentrations of all REE (>10× mantle values), moderate enrichment in LREE (La/Yb ~ 5.3), and non-fractionated mantle-like pattern of LILE. Geochemical fingerprinting of the PL2 tephra with the help of EMP and LA-ICP-MS analyses allowed us to map its occurrence in terrestrial sections across Kamchatka and to identify this layer in Bering Sea sediment cores at a distance of >600 km from the source. New high-precision ¹⁴C dates suggest that the PL2 eruption occurred ~10,200 cal BP, which makes it a valuable isochrone for early Holocene climate fluctuations and permits direct links between terrestrial and marine paleoenvironmental records. The terrestrial and marine ¹⁴C dates related to the PL2 tephra have allowed us to estimate an early Holocene reservoir age for the western Bering Sea at 1,410 ± 64 ¹⁴C years. Another important tephra from the early Holocene eruptive episode of Plosky volcano, coded PL1, was dated at 11,650 cal BP. This marker is the oldest geochemically characterized and dated tephra marker layer in Kamchatka to date and is an important local marker for the Younger Dryas—early Holocene transition. One more tephra from Plosky, coded PL3, can be used as a marker northeast of the source at a distance of ~110 km.