Explosion craters associated with shallow submarine gas venting off Panarea island, Italy

Explosions of hot water, steam, and gas are common periodic events of subaerial geothermal systems. These highly destructive events may cause loss of life and substantial damage to infrastructure, especially in densely populated areas and where geothermal systems are actively exploited for energy. We report on the occurrence of a large number of explosion craters associated with the offshore venting of gas and thermal waters at the volcanic island of Panarea, Italy, demonstrating that violent explosions similar to those observed on land also are common in the shallow submarine environment. With diameters ranging from 5 to over 100?m, the observed circular seafloor depressions record a history of major gas explosions caused by frequent perturbation of the submarine geothermal system over the past 10,000?years. Estimates of the total gas flux indicate that the Panarea geothermal system released over 70?Mt of CO₂ over this period of time, suggesting that CO₂ venting at submerged arc volcanoes contributes significantly to the global atmospheric budget of this greenhouse gas. The findings at Panarea highlight that shallow submarine gas explosions represent a previously unrecognized volcanic hazard around populated volcanic islands that needs to be taken into account in the development of risk management strategies.     

Bedload transport measurements with impact plate geophones: comparison of sensor calibration in different gravel‐bed streams

Indirect bedload transport measurements have been made with the Swiss plate geophone system in five gravel‐bed mountain streams. These geophone sensors record the motion of bedload particles transported over a steel plate mounted flush with the channel bed. To calibrate the geophone system, direct bedload transport measurements were undertaken simultaneously. At the Erlenbach in Switzerland, a moving‐basket sampler was used. At the Fischbach and Ruetz streams in Austria, a Helley–Smith type bedload sampler provided the calibration measurements. A Bunte‐type bedload trap was used at the Rofenache stream in Austria. At the Nahal Eshtemoa in Israel, Reid‐type slot bedload samplers were used. To characterize the response of the geophone signal to bedload particles impacting on the plate, geophone summary values were calculated from the raw signal and stored at one second intervals. The number of impulses, i.e. the number of peaks above a pre‐defined threshold value of the geophone output signal, correlated well with field measured gravel transport loads and was found to be a robust parameter. The relations of impulses to gravel transport loads were generally near‐linear, but the steepness of the calibration relations differed from site to site. By comparing the calibration measurements from the different field sites and utilizing insights gained during preliminary flume experiments, it has been possible to identify the main factors that are responsible for site specific differences in the calibration coefficient. The analysis of these calibration measurements indicates that the geophone signal also contains some information about the grain size distribution of bedload. Copyright © 2013 John Wiley & Sons, Ltd.     

Spectroscopic studies of synthetic and natural ringwoodite, γ-(Mg,Fe)<Subscript>2</Subscript>SiO<Subscript>4</Subscript>

Synthetic ringwoodite γ-(Mg_1?x Fe _x )₂SiO₄ of 0.4 ≤ x ≤ 1.0 compositions and variously colored micro-grains of natural ringwoodite in shock metamorphism veins of thin sections of two S6-type chondrites were studied by means of microprobe analysis, TEM and optical absorption spectroscopy. Three synthetic samples were studied in addition with Mössbauer spectroscopy. The Mössbauer spectra consist of two doublets caused by ^VIFe²⁺ and ^VIFe³⁺, with IS and QS parameters close to those established elsewhere (e.g., O’Neill et al. in Am Mineral 78:456–460, 1993). The Fe³⁺/Fe_total ratio evaluated by curve resolution of the spectra, ranges from 0.04 to 0.1. Optical absorption spectra of all synthetic samples studied are qualitatively very similar as they are directly related to the iron content. They differ mostly in the intensity of the observed absorption features. The spectra consist of a very strong high-energy absorption edge and a series of absorption bands of different width and intensity. The three strongest and broadest absorptions of them are attributed to splitting of electronic spin-allowed ⁵ T _2g → ⁵ E _g transitions of ^VIFe²⁺ and intervalence charge-transfer (IVCT) transition between ferrous and ferric ions in adjacent octahedral sites of the ringwoodite structure. The spin-allowed bands at ca. 8,000 and 11,500 cm^?1 weakly depend on temperature, whilst the Fe²⁺/Fe³⁺ IVCT band at ~16,400 cm^?1 displays very strong temperature dependence: i.e., with increasing temperature it decreases and practically disappears at about 497 K, a behavior typical for bands of this type. With increasing pressure the absorption edge shifts to lower energies while the spin-allowed bands shift to higher energy and strongly decreases in intensity. The IVCT band also strongly weakens and vanishes at about 9 GPa. We assigned this effect to pressure-induced reduction of Fe³⁺ in ringwoodite. By analogy with synthetic samples three broad bands in spectra of natural (meteoritic) blue ringwoodite are assigned to electronic spin-allowed transitions of ^VIFe²⁺ (the bands at ~8,600 and ~12,700 cm^?1) and Fe²⁺/Fe³⁺ IVCT transition (~18,100 cm^?1), respectively. Spectra of colorless ringwoodite of the same composition consist of a single broad band at ca. 12,000 cm^?1. It is assumed that such ringwoodite grains are inverse (Fe, Mg)₂SiO₄-spinels and that the single band is caused by the split spin-allowed ⁵ E → ⁵ T ₂ transition of ^IVFe²⁺. Ringwoodite of intermediate color variations between dark-blue and colorless are assumed to be partly inversed ringwoodite. No glassy material between the grain boundaries in the natural colored ringwoodite aggregates was found in our samples and disprove the cause of the coloration to be due to light scattering effect (Lingemann and Stöffler in Lunar Planet Sci 29(1308), 1998).     

Major and trace element geochemistry of superficial sediments and suspended particulate matter of shallow saline lakes in Eastern Austria

General geochemical parameters of water, superficial sediments, and suspended particulate matter (SPM) were determined from small shallow saline lakes (soda ponds) as well as from lake Neusiedlersee in eastern Austria. Additionally, instrumental neutron activation analysis (INAA) was used to determine the distribution of major, rare earth and other trace elements in superficial sediments and SPM. Chemical results show remarkable differences in salinity and ionic strength between the investigated ponds. Anthropogenic effects, such as drawdown of ground water level and a loss of lake water due to drainage, are clearly reflected in obtained chemical and geological data. Due to a strong dependence of the complexation and scavenging behavior of the rare earth elements (REE) on ionic strength, a significant difference between REE concentrations in soda ponds with different anthropogenic impact was found. The content and composition of authigenic evaporitic minerals in superficial sediments and SPM clearly differ with a fluctuating water level and salt concentration. Furthermore, we determined the distribution of major and trace elements in superficial sediments of a nearby fluvial system. Our results show a clear correlation between REE superficial sediment concentrations in anthropogenically degraded soda ponds and fluvial system. Therefore, we assume that REE concentrations of sediments and SPM are suitable for the study of geochemical changes of inland saline lakes due to anthropogenic impacts on water balance.     

Empirical prediction of debris‐flow mobility and deposition on fans

A new method to predict the runout of debris flows is presented. A data base of documented sediment‐transporting events in torrent catchments of Austria, Switzerland and northern Italy has been compiled, using common classification techniques. With this data we test an empirical approach between planimetric deposition area and event volume, and compare it with results from other studies. We introduce a new empirical relation to determine the mobility coefficient as a function of geomorphologic catchment parameters. The mobility coefficient is thought to reflect some of the flow properties during the depositional part of the debris‐flow event. The empirical equations are implemented in a geographical information system (GIS) based simulation program and combined with a simple flow routing algorithm, to determine the potential runout area covered by debris‐flow deposits. For a given volume and starting point of the deposits, a Monte‐Carlo technique is used to produce flow paths that simulate the spreading effect of a debris flow. The runout zone is delineated by confining the simulated potential spreading area in the down slope direction with the empirically determined planimetric deposition area. The debris‐flow volume is then distributed over the predicted area according to the calculated outflow probability of each cell. The simulation uses the ARC‐Objects environment of ESRI© and is adapted to run with high resolution (2·5 m × 2·5 m) digital elevation models, generated for example from LiDAR data. The simulation program called TopRunDF is tested with debris‐flow events of 1987 and 2005 in Switzerland. Copyright © 2009 John Wiley & Sons, Ltd.     

Trace Elements in Sediments and Mussels – Spatial Distribution,Chemical Partitioning,and Risk Assessment

Sediment samples were collected from 30 different locations in Abu Qir Bay (Mediterranean Sea), East Alexandria, Egypt and analyzed for trace elements. The highest concentrations of most of the elements were observed in the nearshore stations in the vicinity of the major anthropogenic activities as industrial settlements, wastewater discharges, and agricultural drainage. In addition, mussel samples of Mactra corallina and Tapes decussata were collected corresponding to the sediment samples. Concentrations of As, Cd, Cr, Mn, and Zn in the mussel tissues were higher than concentrations in sediments, thus indicating their relatively high bioavailability. Sequential extraction procedure was performed on selected sediment samples. Significant correlations were observed between the concentrations of Cu, Mn, Pb, and Zn in the exchangeable fraction of the sediments and the corresponding tissues of M. corallina. The output of the risk assessment applied on the sediments revealed that adverse ecological effects to benthic species could occur and that a higher level of risk is expected from the exposure to Cd, Cr, Hg, and Zn. No adverse carcinogenic or non‐carcinogenic human health effects are expected from the consumption of the two mussel species from Abu Qir Bay.     

Evidence for xenolith–host basalt interaction from chemical patterns in Fe–Ti-oxides from mafic granulite xenoliths of the Bakony–Balaton Volcanic field (W-Hungary)

We investigate the effects of xenolith–host basalt interaction on lower crustal mafic granulite xenoliths from the Central Pannonian Basin. The xenoliths are devoid of any signs of melting, nevertheless various phenomena are identified, which indicate that the original mineralogy and chemistry of the xenoliths was modified during interaction with the host basalt. The rock-forming silicates are only slightly affected by alteration, but the Fe–Ti-oxides are overprinted to a significant extent. Complex chemical zoning patterns are detected using high-resolution element mapping in ilmenites and in lamellar titanomagnetite–ilmenite intergrowths. The chemical alteration of the Fe–Ti-oxides was diffusion-controlled and, hence, time and temperature dependent. On the basis of diffusion profiles in titanomagnetite we estimate the duration of xenolith–host basalt interaction to be at least 9–20 h. This is comparable to the time necessary for the ascent of the host basalt to the surface. It is too short to reflect alteration during granulite facies metamorphism in the deep crust. The chemical alteration of the titanomagnetite thus reflects the total duration of the xenolith–host basalt interaction.     

Late Holocene tsunami traces on the western and southern coastlines of the Peloponnesus (Greece)

Greece, in particular the western and southern parts close to the subduction zone of the Hellenic Trench, experiences strong earthquakes and subsequent tsunamis. Nevertheless, field evidence of tsunamis from the late Holocene is extremely rare. Our research along the coastlines of the western and southern Peloponnesus resulted in new findings of tsunami impacts in the form of clusters and ridges of large boulders and thick tsunamigenic sand layers encountered in vibracores. Many boulders contained attached marine organisms, which prove that they were transported from the foreshore environment against gravity by extreme wave events. The attached organisms, which have been dated by ¹⁴C-AMS, suggest that historical tsunami events of great energy occurred around 1300 cal AD. A wood fragment found at the base of tsunami deposits in a vibracore from Cape Punta was dated to ~ 250 cal AD.