Global radiation within corn

Global and net solar radiation profiles were measured by traversing sensors at four heights in a square-sown plot and a row plot of field corn on four relatively cloudless days in August 1972. The fluxes and their vertical distributions are discussed. A numerical model of the short-wave radiation fluxes in a canopy is presented. Using leaf area index and fixed leaf radiative properties, calculated values of radiation are within 10% of measurements in most instances. The performance under predominantly beam or diffuse radiation is similar and model values of crop albedo compare well with values calculated from radiation measurements above the crops.     

Petrogenesis of the Eocene and Mio–Pliocene alkaline basaltic magmatism in Meseta Chile Chico, southern Patagonia, Chile: Evidence for the participation of two slab windows

The Meseta Chile Chico (MCC, 46.4°S) is the westernmost exposure of Eocene (lower basaltic sequence, LBS; 55–40 Ma, K–Ar ages) and Mio–Pliocene (upper basaltic sequence, UBS; 16–4 Ma, K–Ar ages) flood basalt volcanism in Patagonia. The MCC is located south of the Lago General Carrera-Buenos Aires (LGCBA), southeast from the present day Chile Triple Junction (CTJ), east of the actual volcanic gap between Southern South Volcanic Zone and Austral Volcanic Zone (SSVZ and AVZ, respectively) and just above the inferred location of the South Chile Ridge segment subducted at 6 Ma (SCR-1). Erupted products consist of mainly ne-normative olivine basalt with minor hy-normative tholeiites basalt, trachybasalt and basanite. MCC lavas are alkaline (42.7–53.1 wt.% SiO₂, 3–8 wt.% Na₂O+K₂O) and relatively primitive (Ni: 133–360 ppm, Cr: 161–193 ppm, Co: 35–72 ppm, 4–16.5 MgO wt.%). They have a marked OIB-like signature, as shown by their isotopic compositions (⁸⁷Sr/⁸⁶Sr_o=0.70311–0.70414 and εNd=+4.7–+5.1) and their incompatible trace elements ratios (Ba/La=10–20, La/Nb=0.46–1.09, Ce/Pb=15.52–27.5, Sr/La<25), reflecting deep mantle origin. UBS-primitive lavas have characteristics similar to those of the Eocene LBS basalts, while UBS-intermediate lavas show geochemical imprints (La/Nb>1, Sr/La>25, low Ce/Pb, Nb/U) compatible with contamination by arc/slab-derived and/or crustal components. We propose that the genesis and extrusion of magmas is related to the opening of two slab windows due to the subduction of two active ridge segments beneath Patagonia during Eocene and Mio–Pliocene.     

Structural evolution of zeolite levyne under hydrostatic and non-hydrostatic pressure: geometric modelling

This is an exploratory study on the high-pressure (HP) structural evolution of a zeolitic framework (with LEV topology) on the basis of geometric modelling and previously published accurate unit-cell constants measured by means of single-crystal X-ray diffraction. The geometric simulations for 11 P values from 0 to 5 GPa gives more insight into the HP-behaviour of levyne, showing that the anomalous elastic behaviour of this zeolite observed under hydrostatic conditions at low P (P<1 GPa) is due to a double change in the compressional mechanism. Since the geometric simulation is not restricted to using the experimentally determined cell parameters, simulations of uniaxial compression along the [001] direction and of compression in the (001) plane have been performed, shedding more light on the compression mechanisms under non-hydrostatic regimes, which are difficult to access experimentally. The mechanisms associated with compressions along different axes provide insight into the hydrostatic compression mechanisms leading to the anomalous elastic behaviour.Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

Early Paleozoic Structural and Metamorphic Evolution of Western Sierra de San Luis (Argentina), in Relation to Cuyania Accretion

Structural, metamorphic and isotopic data obtained from the Nogoli Metamorphic Complex of western Sierra de San Luis indicate that the Early Paleozoic Famatinian Orogeny overprinted an already structured and metamorphosed older basement. The older geological features are relict NW trending fabric associated with high-grade (amphibolite facies) regional metamorphism preserved within thin strips of schists and paragneisses and in the core of mafic to ultramafic lenses. Arc magmatism, medium P (Barrovian type)/high T (amphibolite to granulite facies) regional metamorphism and penetrative NNE to NE trending foliation are related to the building of the Famatinian orogenic belt. The P-T conditions of the Famatinian prograde metamorphism reached a pressure peak of ca. 8 kb, with a thermal peak from -750°C up to -820°C. U-Pb conventional and chemical dating and Ar-Ar plateau ages constrain the peak of the main orogenic phase related to the Famatinian belt to 470–457 Ma (Early to Mid-Ordovician). Greenschist facies retrograde metamorphism closely associated with shear zones and secondary Ar-Ar plateau and Sm-Nd ages suggest that a late to post-orogenic phase of the Famatinian belt was active at least since -445 Ma. This phase continued during the Silurian to Late Devonian times through multiple reactivation of early shear zones. The Famatinian Orogeny reset a previous thermal history and therefore, the timing of the relict fabric could not be constrained conclusively with radiometric dates. Despite this difficulty, a range of 520 to 490 Ma suggests some inheritance from Pampean events registered by the older NW-SE fabric. The Early to Mid-Ordovician regional metamorphism and ductile deformation of the western Sierra de San Luis is interpreted as the orogenic effects of the collision of the allochthonous Cuyania terrane with the autochthonous proto-Pacific margin of Gondwana during the Famatinian Orogeny.     

Micro-Analytical Zircon and Monazite U-Pb Isotope Dating by Laser Ablation-Inductively Coupled Plasma-Quadrupole Mass Spectrometry

In this study we evaluated the capability of a 213 nm laser ablation system coupled to a quadrupole-based ICP-MS in delivering accurate and precise U-Pb ages on zircons and monazites. Four zircon samples ( ca. 50 Ma to ca. 600 Ma) and four monazite samples ( ca. 30 Ma to ca. 1390 Ma) of known ages were analysed utilising laser ablation pits with diameters of 20 μm and 60 μm. Instrument mass bias and laser induced time-dependent elemental fractionation were corrected for by calibration against a matrix-matched reference material. Tera-Wasserburg plots of the calculated U-Pb data were employed to assess, and correct for, common Pb contributions. The results indicated that the LA-ICP-MS technique employed in this study allowed precise and accurate U-Pb isotope dating of zircon and monazite on sample areas 20 μm in diameter. At this spot size, the precisions achieved for single spot ²⁰⁶Pb/²³⁸U ages, were better than 5% (2s) for monazites and zircons with ages down to 30 Ma and 50 Ma, respectively. The precisions reported are comparable to those generally reported in SIMS and LA-MC-ICP-MS U-Pb isotope determinations.     

Guidelines for the good practice of surface wave analysis: a product of the InterPACIFIC project

Surface wave methods gained in the past decades a primary role in many seismic projects. Specifically, they are often used to retrieve a 1D shear wave velocity model or to estimate the V_S,30 at a site. The complexity of the interpretation process and the variety of possible approaches to surface wave analysis make it very hard to set a fixed standard to assure quality and reliability of the results. The present guidelines provide practical information on the acquisition and analysis of surface wave data by giving some basic principles and specific suggestions related to the most common situations. They are primarily targeted to non-expert users approaching surface wave testing, but can be useful to specialists in the field as a general reference. The guidelines are based on the experience gained within the InterPACIFIC project and on the expertise of the participants in acquisition and analysis of surface wave data.     

Estimates of Horizontal Groundwater Flow Velocities in Boreholes

Currently, monitoring tools can be deployed in observation boreholes to better assess groundwater flow, flux of dissolved contaminants and their mass discharge in an aquifer. The relationship between horizontal water velocity in observation boreholes and Darcy fluxes in the surrounding aquifer has been studied for natural flow conditions (i.e., no pumping). Interpretation of measurements taken with dilution tests, the colloidal borescope, the Heat Pulse Flowmeter, and other techniques require the conversion of observed borehole velocity u to aquifer Darcy flux q_∞ . This conversion is typically done through a proportionality factor α = u/q_∞ . In experimental studies as well as in theoretical developments, reported values of α vary almost three orders of magnitude (from 0.5 to 10). This large variability in reported values of α could be explained by: (1) unclear distinction between Darcy flux and water seepage velocity, (2) unclear definition of water velocity in the borehole, (3) effects of well screen and the presence of the measurement device itself on the observable velocities, and (4) hydraulic conditions in the borehole annulus. We address (1), (2) from a conceptual/theoretical perspective, and (3) by means of numerical simulations. We show that issue (1) in low porosity aquifers can yield to order-of-magnitude discrepancies in estimates of q_∞ ; (2) may result in discrepancies of up to 50%, and (3) can cause differences up to 20% of water velocity in the borehole void space compared to the theoretical case of an open borehole.     

In situ measurements of fine sediment infiltration (FSI) in gravel-bed rivers with a hydropeaking flow regime

The overpresence of fine sediment and fine sediment infiltration (FSI) in the aquatic environment of rivers are of increasing importance due to their limiting effects on habitat quality and use. The habitats of both macroinvertebrates and fish, especially spawning sites, can be negatively affected. More recently, hydropeaking has been mentioned as a driving factor in fine sediment dynamics and FSI in gravel-bed rivers. The primary aim of the present study was to quantify FSI in the vertical stratigraphy of alpine rivers with hydropeaking flow regimes in order to identify possible differences in FSI between the permanently wetted area (during base and peak flows) and the so-called dewatering areas, which are only inundated during peak flows. Moreover, we assessed whether the discharge ratio between base and peak flow is able to explain the magnitude of FSI. To address these aims, freeze-core samples were taken in eight different alpine river catchments. The results showed significant differences in the vertical stratification of FSI between the permanently wetted area during base flow and the dewatering sites. Surface clogging occurred only in the dewatering areas, with decreasing percentages of fine sediments associated with increasing core depths. In contrast, permanently wetted areas contained little or no fine sediment concentrations on the surface of the river bed. Furthermore, no statistical relationship was observed between the magnitude of hydropeaking and the sampled FSI rate. A repeated survey of FSI in the gravel matrix revealed the importance of de-clogging caused by flooding and the importance of FSI in the aquatic environment, especially in the initial stages of riparian vegetation establishment. © 2018 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.