Modelling the effects of Zostera noltei meadows on sediment dynamics: application to the Arcachon lagoon

A three-dimensional model has been modified to describe the complex interactions between hydrodynamics, sediment dynamics and biological parameters in the presence of Zostera noltei. The model treats seagrass leafs as flexible blades that bend under hydrodynamic forcing and alter the local momentum and turbulence fluxes and, therefore, the benthic shear conditions; these changes cause related changes to the mass balance at the boundary of the bed, in turn affecting the suspended matter in the column and ultimately primary productivity and the growth of the dwarf-grass. Modelling parameters related to the impact of Z. noltei to the local flow and to erosion and deposition rates were calibrated using flume experimental measurements; results from the calibration of the model are presented and discussed. The coupled model is applied in the Arcachon Bay, an area with high environmental significance and large abundance of dwarf-grass meadows. In the present paper, results from preliminary applications of the model are presented and discussed; the effectiveness of the coupled model is assessed comparing modelling results with available field measurements of suspended sediment concentrations and seagrass growth parameters. The model generally reproduces sediment dynamics and dwarf-grass seasonal growth in the domain efficiently. Investigations regarding the effects of the vegetation to the near-bed hydrodynamics and to the sediment suspension in the domain show that dwarf-grass meadows play an important part to velocity attenuation and to sediment stabilisation, with flow and suspended sediment concentrations damping, compared to an unvegetated state, to reach 35–50 and 65 %, respectively, at peak seagrass growth.     

Cladocora caespitosa bioconstructions in the Columbretes Islands Marine Reserve (Spain,NW Mediterranean): distribution,size structure and growth

Today, living banks of the coral Cladocora caespitosa appear to be restricted to a few Mediterranean locations and are threatened by the escalating impacts affecting coastal areas. In this study the exceptional occurrence of the Mediterranean coral C. caespitosa in the Columbretes Islands Marine Reserve (NW Mediterranean, Spain) is characterised in terms of spatial distribution, cover area, colony size and growth rates. The coral colonies form beds and banks in rocky bottoms within a semi‐enclosed bay that offers both hydrodynamic protection and high water exchange. The spatial distribution of the C. caespitosa colonies, from 5 to 27 m depth, is highly aggregated, depending on sea‐floor morphology and showing up to 80% of substrate coverage. The annual corallite growth rates obtained through the alizarin red staining method and x‐ray image analysis are similar, and range between 2.55 ± 0.79 mm and 2.54 ± 0.81 mm, respectively. The exceptional nature of these bioconstructions is due to their cumulative cover area, which is comparable in size to the largest C. caespitosa bioconstructions described to date in Mljet National Park (Croatia, Adriatic Sea).     

Multidisciplinary inferences on a newly recognized active east‐dipping extensional system in Central Italy

We use a multidisciplinary approach to gather preliminary evidence for a Quaternary east‐dipping extensional detachment in Central Italy. This structure crops out in the Sabini‐Eastern Simbruini (SES) and would be hidden at mid‐crustal depths beneath the L'Aquila 2009 (M_w6.3) epicentral area. The SES geometry is reconstructed through geological mapping, structural analysis and seismic line interpretation. The geometry of the mid‐crustal segment, referred to as the Ocre Segment (OS), is interpreted through seismological analyses of the largest aftershock (M_w5.4) of the L'Aquila 2009 sequence. The kinematic compatibility between the SES and the OS under a common SW–NE tensional field is tested through stress inversion of both geological and seismological data. The reliability of OS activation is tested through slip tendency analysis. Like other Italian cases, the SES and the OS are preliminarily interpreted as expressions at different depths of the same unknown east‐dipping extensional detachment, characterized by a ramp–flat–ramp geometry.     

Joint 3D processing of active and passive seismic data

Passive seismic provides additional illumination sources in producing reservoirs, improving the Earth's imaging obtained by standard 3D seismic surveys. The joint tomographic inversion of surface and borehole data, both active and passive, even allows the delineation of thin reservoirs that cannot be resolved by reflection tomography. As an application example, we present a feasibility study for a real case of CO₂ geological storage, showing that this operation may benefit both environment and reservoir monitoring. The origin time of micro‐earthquakes due to production operations is critical for merging active and passive data. We show here that the Wadati's method is not accurate for borehole data in a layered earth model, when the ratio between P and S velocities is not constant, as occurs in most hydrocarbon reservoirs. This drawback can be solved by deploying a few receivers at the surface close to the well.     

Life-cycle based design of mass dampers for the Chilean region and its application for the evaluation of the effectiveness of tuned liquid dampers with floating roof

The assessment of the effectiveness of mass dampers for the Chilean region within a multi-objective decision framework utilizing life-cycle performance criteria is considered in this paper. The implementation of this framework focuses here on the evaluation of the potential as a cost-effective protection device of a recently proposed liquid damper, called tuned liquid damper with floating roof (TLD-FR). The TLD-FR maintains the advantages of traditional tuned liquid dampers (TLDs), i.e. low cost, easy tuning, alternative use of water, while establishing a linear and generally more robust/predictable damper behavior (than TLDs) through the introduction of a floating roof. At the same time it suffers (like all other liquid dampers) from the fact that only a portion of the total mass contributes directly to the vibration suppression, reducing its potential effectiveness when compared to traditional tuned mass dampers. A life-cycle design approach is investigated here for assessing the compromise between these two features, i.e. reduced initial cost but also reduced effectiveness (and therefore higher cost from seismic losses), when evaluating the potential for TLD-FRs for the Chilean region. Leveraging the linear behavior of the TLD-FR a simple parameterization of the equations of motion is established, enabling the formulation of a design framework that beyond TLDs-FR is common for other type of linear mass dampers, something that supports a seamless comparison to them. This framework relies on a probabilistic characterization of the uncertainties impacting the seismic performance. Quantification of this performance through time-history analysis is considered and the seismic hazard is described by a stochastic ground motion model that is calibrated to offer hazard-compatibility with ground motion prediction equations available for Chile. Two different criteria related to life-cycle performance are utilized in the design optimization, in an effort to support a comprehensive comparison between the examined devices. The first one, representing overall direct benefits, is the total life-cycle cost of the system, composed of the upfront device cost and the anticipated seismic losses over the lifetime of the structure. The second criterion, incorporating risk-averse concepts into the decision making, is related to consequences (repair cost) with a specific probability of exceedance over the lifetime of the structure. A multi-objective optimization is established and stochastic simulation is used to estimate all required risk measures. As an illustrative example, the performance of different mass dampers placed on a 21-story building in the Santiago area is examined.     

State-of-the art and future of earthquake early warning in the European region

European researchers and seismic networks are active in developing new approaches to earthquake early warning (EEW), implementing and operating test EEW systems, and in some cases, offering operational EEW to end users. We present the key recent developments in EEW research in Europe, describe the networks and regions where EEW is currently in testing or development, and highlight the two systems in Turkey and Romania that currently provide operational systems to a limited set of end users.     

A neuro fuzzy approach to recognize rock magnetic and lithological patterns in a stratigraphic well from the Llanos Foreland Basin (Colombia)

The Neuro Fuzzy System (NFS) is a hybrid algorithm that combines fuzzy logic with neural networks. Since it can be used as a pattern recognition technique, we explore its potential to characterize the major lithological units encompassed by the first 512 m of the Colombian stratigraphic well Saltarin 1A (Guayabo and León Formations). Thus, we employ the NFS to infer the magnetic remanence S-ratio using bulk magnetic susceptibility (κ), κ-normalized saturation isothermal magnetization (SIRM κ) and/or volume of shale (V_sh) obtained from a gamma-ray log. The best results in terms of their corresponding Root Mean-Square Error (RMSE) values, throughout most of the upper Guayabo Formation, where magnetite seems to be an important magnetic phase, are attained with logκ and SIRM κ as input variables. Beyond 350 m downcore, the quality of the inference decreases over the León Formation, characterized by a significant presence of pyrrhotite. However, the extra input variable V_sh adjusts the inferred S-ratio to their experimental counterparts throughout this formation suggesting that the early diagenesis process that led to the formation of dispersed clay in these samples was also responsible for the formation of pyrrhotite. Hence the inclusion of manifold input data increases the ability of the net to predict S-ratio in complex geological settings with a sequence of changing lithologies, varying amounts and types of magnetic minerals, and different distributions of mineral grain sizes. In case these variables do not properly infer the actual S-ratio data, the extent of the different lithostratigraphic units would be still identifiable in some cases by the uneven quality of the correlation observed between inferred and experimental values.     

A low temperature X-ray single-crystal diffraction and polarised infra-red study of epidote

The effects of low-temperature on the crystal structure of a natural epidote [Ca_1.925Fe_0.745Al_2.265Ti_0.004Si_3.037O₁₂(OH), a = 8.8924(7), b = 5.6214(3), c = 10.1547(6)? and β = 115.396(8)° at room conditions, Sp. Gr. P2₁ /m] have been investigated with a series of structure refinements down to 100 K on the basis of X-ray single-crystal diffraction data. The reflection conditions confirm that the space group is maintained within the T-range investigated. Structural refinements at all temperatures show the presence of Fe³⁺ at the octahedral M(3) site only [%Fe(M3) = 70.6(4)% at 295 K]. Only one independent proton site was located and two possible H-bonds occur, with O(10) as donor and O(4) and O(2) as acceptors. The H-bonding scheme is maintained down to 100 K and is supported by single crystal room-T polarised FTIR data. FTIR Spectra over the region 4,000–2,500 cm⁻¹ are dominated by the presence of a strongly pleochroic absorption feature which can be assigned to protonation of O(10)–O(4). Previously unobserved splitting of this absorption features is consistent with a NNN influence due to the presence of Al and Fe³⁺ on the nearby M(3) site. An additional relatively minor absorption feature in FTIR spectra can be tentatively assigned to protonation of O(10)–O(2). Low-T does not affect significantly the tetrahedral and octahedral bond distances and angles, even when distances are corrected for “rigid body motions”. A more significant effect is observed for the bond distances of the distorted Ca(1)- and Ca(2)-polyhedra, especially when corrected for “non-correlated motion”. The main low-T effect is observed on the vibrational regime of the atomic sites, and in particular for the two Ca-sites. A significant reduction of the magnitude of the thermal displacement ellipsoids, with a variation of U _eq (defined as one-third of the trace of the orthogonalised U _ij tensor) by ~40% is observed for the Ca-sites between 295 and 100 K. Within the same T-range, the U _eq of the octahedral and oxygen sites decrease similarly by ~35%, whereas those of the tetrahedral cations by ~22%.