Quantifying different riverbank erosion processes during an extreme flood event

Riverbank erosion is a major contributor to catchment sediment budgets. At large spatial scales data is often restricted to planform channel change, with little information on process distributions and their sediment contribution. This study demonstrates how multi‐temporal LiDAR and high resolution aerial imagery can be used to determine processes and volumes of riverbank erosion at a catchment scale. Remotely sensed data captured before and after an extreme flood event, enabled a digital elevation model of difference (DoD) to be constructed for the channel and floodplain. This meant that: the spatial area that could be assessed was extensive; three‐dimensional forms of bank failures could be mapped at a resolution that enabled process inference; and the volume and rates of different bank erosion processes over time could be assessed. A classification of riverbank mass failures, integrating form and process, identified a total of 437 mass failure polygons throughout the study area. These were interpreted as wet flow mass failures based on the presence of a well defined scarp wall and the absence of failed blocks on the failure floor. The failures appeared to be the result of: bank exfiltration, antecedent moisture conditions preceding the event, and the historic development of the channel. Using one‐dimensional hydraulic modelling to delineate geomorphic features within the main boundary of the macrochannel, an estimated 1 466 322 m² of erosion was interpreted as fluvial entrainment, occurring across catchment areas from 30 to 1668 km². Only 8% of the whole riverbank planform area was occupied by mass failures, whilst fluvial entrainment covered 33%. A third of the volume of material eroded came from mass failures, even though they occupied 19% of the eroded bank area. The availability of repeat LiDAR surveys, combined with high‐resolution aerial photography, was very effective in erosion process determination and quantification at a large spatial scale. Copyright © 2013 John Wiley & Sons, Ltd.     

A New Data Processing Strategy for Huge GNSS Global Networks

In Global Positioning System (GPS) data analyses, large networks are usually divided into sub-networks to solve the conflict between increasing amounts of data and limited computer resources, although an integrated analysis would provide better results. This conflict becomes even more critical with the increasing number of stations, and low-Earth-orbiting satellites and the Galileo system coming into operation. The major reason is that a huge number of ambiguity parameters are kept in the normal equation for sequential integer ambiguity fixing. In this paper, the problem is solved by a special procedure of parameter elimination for both real-valued and ambiguity-fixed solutions, based on an adapted ambiguity-fixing approach where the covariance-matrix of ambiguity parameters is not required anymore. It is demonstrated that, with the new strategy, the required memory can be reduced to one-tenth and the computation time to at least one-third compared to the existing methods, and huge GPS networks with several hundred stations can be processed efficiently on a personal computer.     

On the use of loss‐on‐ignition techniques to quantify fluvial particulate organic carbon

The fluvial flux of carbon (C) from terrestrial to marine environments represents an important component of the global C‐cycle, which can transfer C from the atmosphere to sedimentary storage. Fluvial fluxes of C are also an essential resource for freshwater ecosystems, critical for habitat heterogeneity and function. As such it is crucial that we are able to quantify this flux accurately. However, at present there are a number of different techniques used to quantify concentrations of fluvial C, and these techniques vary in their accuracy. In this article, we compare particulate organic carbon (POC) measurements derived from two commonly‐used techniques; a simple combustion and loss‐on‐ignition (LOI) technique, and an oxidative–combustion and carbon dioxide (CO₂) detection technique. The techniques were applied to water samples collected from 10 contrasting reference‐condition, temperate river ecosystems. The POC measurements derived from the LOI technique were up to 16 times higher (average four times higher), than those derived from the oxidative–combustion and CO₂ detection technique. This difference was highly variable both across the different river ecosystems and within each river ecosystem over time, suggesting that there is no simple way of converting the mass measured by LOI to estimates of fluvial POC. It is suggested that the difference in POC measured by these two techniques is a consequence of: (1) the loss of inorganic carbon at LOI combustion temperatures of > 425 °C, (2) the potential during the LOI combustion stage to lose hygroscopic and intercrystalline water, not completely driven off by the drying stage at temperatures of < 150 °C, and (3) the variable C content of fluvial organic matter, meaning that the simple application of a fixed correction factor to values obtained from the LOI technique may not be appropriate. These findings suggest that oxidative–combustion and CO₂ detection techniques are preferential for quantifying fluvial POC. Copyright © 2013 John Wiley & Sons, Ltd.     

Amphibole zoning in the Garland Peak Syenite,Red Hill complex,New Hampshire: camptonitic parental magmas and differentiation to silica-oversaturated syenites

The Garland Peak Syenite (GPS) of the Red Hill complex, New Hampshire, consists predominantly of amphibole, oligoclase, perthite, and quartz; amphiboles have homogeneous kaersutite cores with strongly zoned rims ranging in composition from pargasite to hastingsite to hornblende. The thin section scale association of kaersutite, an amphibole that typically crystallizes in silica-undersaturated magmas, with quartz suggests that the GPS magma experienced substanital changes in magmatic composition, including silica activity, during its crystallization history. Kaersutite-bearing camptonites are also associated with the Red Hill complex. The camptonite amphiboles are very similar in composition to the core kaersutites in the GPS, suggesting that the earliest GPS liquid may have had camptonitic affinities. In order to elucidate the process where-by silica-undersaturated magmas differentiate to saturation, amphiboles in these rocks were analyzed by electron and ion microprobe techniques. Amphiboles show a progressive increase in REE abundances from the camptonites to the GPS kaersutite cores to the GPS pargasite/hastingsite/hornblende rims. The systematic change in REE concentrations, and the variations in V, Ti, Sr versus Zr, Eu/Eu⁰ and La/Yb versus Ce, suggest a possible differentiation relationship for the amphiboles and imply that the GPS was derived from magmas similar to camptonites. Rimward depletions in Sr, Ti, V, and Eu/Eu⁰, and the increase in La/Yb values suggest that parental camptonites fractionated plagioclase, magnetite, and amphibole to produce the silica-oversaturated GPS. Bulk-rock modelling agrees with the trace element record preserved in the amphiboles, that plagioclase, magnetite, and amphibole fractionation caused silica saturation. Minor pegmatitic patches occur in the GPS. Ferrohornblendes in the pegmatites have REE abundances distinct from the other GPS amphiboles, and this difference may be due to open system processes.     

The evolution of young silicic lavas at Medicine Lake Volcano,California: Implications for the origin of compositional gaps in calc-alkaline series lavas

At Medicine Lake Volcano, California, the compositional gap between andesite (57–62 wt.% SiO₂) and rhyolite (73–74 wt.% SiO₂) has been generated by fractional crystallization. Assimilation of silicic crust has also occurred along with fractionation. Two varieties of inclusions found in Holocene rhyolite flows, hornblende gabbros and aphyric andesites, provide information on the crystallization path followed by lavas parental to the rhyolite. The hornblende gabbros are magmatic cumulate residues and their mineral assemblages are preserved evidence of the phases that crystallized from an andesitic precursor lava to generate the rhyolite lavas. The andesitic inclusions represent samples of a parental andesite and record the early part of the differentiation history. Olivine, plagioclase and augite crystallization begins the differentiation history, followed by the disappearance of olivine and augite through reaction with the liquid to form orthopyroxene and amphibole. Further crystallization of the assemblage plagioclase, amphibole, orthopyroxene, magnetite, and apatite from a high-SiO₂ andesite leads to rhyolite. This final crystallization process occurs on a cotectic that is nearly horizontal in temperature-composition space. Since a large amount of crystallization occurs over a limited temperature interval, a compositional gap develops between rhyolite and high SiO₂ andesite.Liquidus surfaces with shallow slopes in temperature-composition space are characteristic of several late-stage crystallization assemblages in the andesite to rhyolite compositional range. Experimentally produced plagioclase+ amphibole+orthopyroxene+magnetite and plagioclase+ augite+low-Ca pyroxene+magnetite cotectics have liquidus slopes that are nearly flat. At other calc-alkaline volcanic centers crystallization processes involving large compositional changes over small temperature intervals may also be important in the development of bimodal volcanism (i.e. the existence of a composition gap). At Mt. Mazama and Mt. St. Helens, USA and Aso Caldera and Shikotsu, Japan the amphibole-bearing assemblage was important. At Krakatau, Indonesia and Katmai, USA, an augite+orthopyroxene-bearing assemblage was important. In addition to its role in the production of a compositional gap between intermediate and rhyolitic lavas, the crystallization process increases the H₂O content of the residual liquid. This rapid increase in residual liquid volatile content which results from the precipitation of a large proportion of crystalline solids may be an important factor among several that lead to explosive silicic eruptions.     

Petrology of Medicine Lake Highland volcanics: Characterization of endmembers of magma mixing

Lavas from Medicine Lake volcano, Northern California have been examined for evidence of magma mixing. Mixing of magmas has produced basaltic andesite, andesite, dacite and rhyolite lavas at the volcano. We are able to identify the compositional characteristics of the components that were mixed and to estimate the time lag between the mixing event and eruption of the mixed magma. Compositional data from pairs of phenocrysts identify a high alumina basalt (HAB) and a silicic rhyolite as endmembers of mixing. Mg-rich olivine or augite and Ca-rich plagioclase are associated with the HAB component, and Fe-rich orthopyroxene and Na-rich plagioclase are associated with the rhyolitic component. Some lavas contain multiple phenocryst assemblages suggesting the incorporation of several magmas intermediate between the HAB and silicic components. Glass inclusions trapped in Mg-rich olivine and Na-rich plagioclase are similar in composition to the proposed HAB and rhyolite end members and provide supportive evidence for mixing. Textural criteria are also consistent with magma mixing. Thermal curvature of the liquidus surfaces in the basalt-andesite-rhyolite system allows magmas produced by mixing to be either supercooled or superheated. Intergranular textures of basaltic andesites and andesites result from cooling initiated below the liquidus. The trachytic textures of silicic andesites form from cooling initiated above the liquidus. Reversed compositional zoning profiles in olivine crystals were produced by the mixing event, and the homogenization of the compositional zoning has been used to estimate the time interval between magma mixing and eruption. Time estimates are on the order of 80 to 90 h, suggesting that the mixing event triggered eruption.     

Respiration partitioning in contrasting subtidal sediments: seasonality and response to a spring phytoplankton deposition

Biomass and respiration rates of bacteria, nematodes and macrobenthos were estimated in relation to the deposition of the spring phytoplankton bloom at two contrasting sites in the Southern North Sea: one with fine‐grained sediment close to the coastline and another with highly permeable sediments. Sediment community oxygen consumption (SCOC) was also measured. Bacterial biomass was relatively similar at both stations, whereas nematode and macrobenthic biomass were higher in fine‐grained sediment. In fine sediments, bacterial biomass increased quickly after deposition of the phytoplankton bloom, whereas the response of nematodes and macrobenthos was delayed. In coarser sediments, nematodes and macrobenthos also showed a fast response in terms of density and biomass. Respiration in permeable sediments was mainly dominated by bacteria at all periods of the year. Hence, nematode and macrobenthic respiration did not contribute strongly to SCOC. This is in contrast to the patterns observed in finer sediments, where both macrofauna and nematodes were important oxygen consumers as well. Macrobenthos contributed more to total SCOC than did nematodes in winter. However, shortly after the arrival of phytodetritus at the sea floor, nematodes and macrobenthos contributed equally to the total SCOC, indicating that all benthic size classes should be taken into account when investigating marine benthic respiration rates.