Post-solidification cooling and the age of Io's lava flows

The modeling of thermal emission from active lava flows must account for the cooling of the lava after solidification. Models of lava cooling applied to data collected by the Galileo spacecraft have, until now, not taken this into consideration. This is a flaw as lava flows on Io are thought to be relatively thin with a range in thickness from ∼1 to 13 m. Once a flow is completely solidified (a rapid process on a geological time scale), the surface cools faster than the surface of a partially molten flow. Cooling via the base of the lava flow is also important and accelerates the solidification of the flow compared to the rate for the ‘semi-infinite’ approximation (which is only valid for very deep lava bodies). We introduce a new model which incorporates the solidification and basal cooling features. This model gives a superior reproduction of the cooling of the 1997 Pillan lava flows on Io observed by the Galileo spacecraft. We also use the new model to determine what observations are necessary to constrain lava emplacement style at Loki Patera. Flows exhibit different cooling profiles from that expected from a lava lake. We model cooling with a finite-element code and make quantitative predictions for the behavior of lava flows and other lava bodies that can be tested against observations both on Io and Earth. For example, a 10-m-thick ultramafic flow, like those emplaced at Pillan Patera in 1997, solidifies in ∼450 days (at which point the surface temperature has cooled to ∼280 K) and takes another 390 days to cool to 249 K. Observations over a sufficient period of time reveal divergent cooling trends for different lava bodies [examples: lava flows and lava lakes have different cooling trends after the flow has solidified (flows cool faster)]. Thin flows solidify and cool faster than flows of greater thickness. The model can therefore be used as a diagnostic tool for constraining possible emplacement mechanisms and compositions of bodies of lava in remote-sensing data.     

A test of Sporormiella representation as a predictor of megaherbivore presence and abundance

Spores of the dung fungus Sporormiella have been suggested to indicate the presence, perhaps also the abundance of past megaherbivore populations. Nonetheless, basic studies demonstrating a correlation between Sporormiella concentration in lacustrine sediments and modern herbivore abundance are lacking. This study of Sporormiella representation in grazed and ungrazed landscapes provides supporting evidence for the application of Sporormiella as an indicator of megaherbivore presence and abundance in ancient landscapes. However, Sporormiella representation is spatially sensitive to the distance from the dung source. In lakes where Sporomiella are abundant in shoreline sediments, they decline sharply with increasing distance from the lake edge. Although this study provides supporting evidence for the application of Sporormiella as a proxy for herbivore presence and abundance, independent proxies should be applied in conjunction with Sporormiella to control for changes in lake size.     

Experimental study on the bidirectional inelastic deformation capacity of U‐shaped steel dampers for seismic isolated buildings

Hysteretic dampers are used to dissipate earthquake‐induced energy in base‐isolated structures by acquiring inelastic deformations, rendering their hysteretic behavior of vital importance. The present paper focuses on investigating the behavior of U‐shaped steel dampers under bidirectional loading; this is significantly different from their corresponding uniaxial behavior. Two main sets of loading tests on full‐scale specimens are conducted in this regard: (i) quasi‐static tests with simple histories and (ii) dynamic tests with realistic loading histories. Based on the results obtained in the quasi‐static tests, an interaction curve that accounts for the reduction of the cyclic deformation capacity is proposed. However, the fidelity of this relation must be assessed under loading conditions similar to those of a seismically isolated structure subjected to an earthquake, which represents the goal of the second set of tests. The results of the dynamic tests validate the proposed interaction curve for estimating the deformation capacity of U‐shaped steel dampers under bidirectional loading. Copyright © 2015 John Wiley & Sons, Ltd.     

Forecasting the impact of climate on food systems: Model testing and model linkage

This paper discusses the importance of testing models which may be used to forecast the impact of climate on society. Model testing using sensitivity analysis and validation techniques is illustrated with two models: (1) the YIELD model which simulates the impact of climate on crop yields of several major crops, and (2) the International Futures Simulation model which can be used to simulate the impact of crop yield changes on the world food system. The problems of linking such models to each other are also discussed.     

Variations in exospheric density at heights near 1100km, derived from satellite orbits

In an earlier paper, values of exospheric density were obtained from the orbit of Echo 2 for the years 1964–1965. The results indicated a semi-annual variation in density by a factor of between 2 and 3, considerably larger than predicted by existing atmospheric models.

These studies have now been extended to the beginning of 1967, using both Echo 2 and Calsphere 1, to show how the density is responding to increasing solar activity. Variations in density during 1964 have been analysed in more detail. The long-term variation associated with the solar cycle and the short-term variations associated with magnetic and solar disturbances agree with the variations expected on the basis of current models. The semi-annual variation is persisting to higher levels of solar activity, and although its amplitude is diminishing the factor of variation was still 1.6 in 1966.     

Similarities between Circular Polarization in Galactic Jet Sources and AGN

We compare the observational properties of the circular polarization in Galactic jet sources with that observed in AGN, and outline the constraints they place on the mechanism responsible for the circular polarization. We also discuss the implications of the time scale of polarization variations on the mechanism responsible for the circular polarization.     

Effect of reproductive state and sex on movement and food consumption of western rock lobster (Panulirus cygnus) in a tank environment

The catchability of western rock lobsters (Panulirus cygnus) during the spawning season (October and November) may be affected by their reproductive state. In this study, movement and food consumption of males and females of different reproductive states held in laboratory tanks were measured as proxies for catchability. Density of lobsters was found to influence both movement and food consumption. Solitary animals and, to a lesser extent, two lobsters per tank, were more sedentary and consumed significantly less food than animals at a density of three or four specimens per tank. Tests using three animals per tank confirmed that mature, unmated, and ovigerous females carrying early stage eggs moved more frequently away from their shelters than males or females carrying late stage eggs (P < 0.0001, d.f. = 3). Further, unmated females and females with early stage eggs recorded significantly higher food consumption (P < 0.0061, d.f. = 3) compared with males or females carrying late stage eggs. The greater time spent away from shelter and also food consumption make unmated females and females with early stage eggs likely to be more catchable than males or females with late stage eggs. As catchability is commonly used to obtain population estimates from survey data, these results have implications for surveys which use catch rates of breeding animals as indicators of egg production.     

Toxic metals in a highly urbanized industry-impacted estuary (Bahia Blanca Estuary,Argentina): spatio-temporal analysis based on GIS

Cadmium, chromium, nickel, and lead were evaluated in the particulate fraction at one of the most industrialized estuaries at the Southwestern Atlantic Ocean, through Geographic Information System (GIS). Concentrations were analyzed at 21 stations during 2008–2010. The highest metal concentrations (Cd: 8,9; Cr: 256,49; Ni: 27,02; Pb: 78,43 µg g^??1 d. w.) were recorded at the stations located near industrial and urban discharges situated along the estuary. In addition, Pb presented a different seasonal and spatial behavior in comparison with Cd, Cr and Ni. Winter and spring presented the higher concentrations of Pb, and the inner stations presented the higher values. The estuary is considered a moderate to strongly polluted and significantly polluted according to the Index of geoaccumulation (I_geo) and the Enrichment Factor of Cd, respectively. The Multidimensional Scaling plot showed three groups of stations: the inner, associated to low levels of metals (G1), middle stations (G2) with intermediate levels and the outer (G3) with the highest ones. In addition, this work reveals the usefulness of the GIS-mapping techniques in the distribution of pollutants along an estuarine environment and the environmental quality assessment of estuarine systems.     

Metals in tidal flats colonized by microbial mats within a South-American estuary (Argentina)

In this study, we measured the concentrations of metals (Cd, Cu, Pb, Ni, Cr, Zn, Hg, Mn, and Fe) and assessed the characteristics of tidal flats (grain size and organic matter content) in sediments and their overlying microbial mats fractions to evaluate the anthropogenic impact within the Bahía Blanca Estuary (BBE). Puerto Rosales (PR) and Almirante Brown (AB), located in the middle and inner zone of the estuary, respectively, were used as sampling sites. Sediments were composed mainly of silt–clay in AB, whereas first fine-grained particles were coarser in depth in PR. Regarding the concentration of metals in both fractions, we found differences between sites: There were higher concentrations of overall metals in AB relative to PR. In addition, higher concentrations of Cu were recorded in the first centimeters of AB tidal flats, whereas higher concentration of Cd were recorded in microbial mats of PR. Considering that the grain size was similar between sites, these results are consistent with the high concentration of organic matter found in AB, probably because this site is close to a former municipal dump and sewage discharges. Also, the higher Cd content found in PR site would highlight both the influence of untreated urban discharges and port anthropogenic activities. In conclusion, this study allowed identifying high values of some metals in the presence of microbial mats in the BBE, thus suggesting a possible interaction between both, at least for metals like Cu or Cd.     

Analyzing CO2 emissions mitigation by technology improvement in Central and Eastern Europe

As a legacy of the centrally planned economy, the economies in transition of Central and Eastern Europe (CEE) have a unique potential to reduce their greenhouse gas emissions through the improvement in their high energy intensities. Since much of this `low-hanging fruit' in energy-efficiency improvements can be highly cost-effective, many developed countries facing difficulties in meeting their greenhouse gas (GHG) emission targets domestically are eager to find such opportunities in the CEE region. Therefore, studies analysing the potentials and costs of carbon dioxide reduction through technology improvement in the region have come into the limelight. While there are a few excellent studies in the region aimed at analysing climate change abatement potentials, they all embark on different assumptions, methodologies and boundary conditions. It is hence difficult, if not impossible, to compare and analyse the results of these studies across different authors, countries or time horizons. Consequently, the purpose of this paper is to place four leading studies on GHG mitigation through technology improvement from the CEE region into an internationally comparable framework. Four studies were selected from three countries, Poland, Hungary and Estonia, which are all the results of major national and international efforts to assess costs and potentials of GHG reduction. The paper places their assumptions, methods and final results into a framework which enables policy-makers and project designers to compare these across geographical and technological boundaries. Since other studies from around the globe have been analysed in this framework in the literature, this paper provides a vehicle for the findings of these four studies to be compared to others worldwide. In addition, the paper highlights a few areas where similar studies to be completed in the future in the region may be enhanced by incorporating features used in GHG mitigation research in other parts of the world. This revised version was published online in July 2006 with corrections to the Cover Date.