Aeolian fetch distance and secondary airflow effects: the influence of micro‐scale variables on meso‐scale foredune development

Unsuccessful attempts to use process‐scale models to predict long‐term aeolian sediment transport patterns have long been a feature of aeolian research. It has been proposed that one approach to overcome these problems is to identify micro‐scale variables that are important at longer timescales. This paper assesses the contribution of two system variables (secondary airflow patterns and fetch distance) to medium‐term (months to years) dune development. The micro‐scale importance of these variables had been established during previous work at the site (Magilligan Strand, Northern Ireland). Three methods were employed. First, sand drift potentials were calculated using 2 years of regional wind data and a sediment transport model. Second, wind data and large trench traps (2 m length × 1 m width × 1·5 m depth) were used to assess the actual sediment transport patterns over a 2‐month period. Third, a remote‐sensing technique for the identification of fetch distance, a saltation impact sensor (Safire) and wind data were utilized to gauge, qualitatively, sediment transport patterns over a 1‐month period. Secondary airflow effects were found to play a major role in the sediment flux patterns at these timescales, with measured and predicted rates matching closely during the trench trap study. The results suggest that fetch distance is an unimportant variable at this site. Copyright © 2007 John Wiley & Sons, Ltd.     

Variability of shallow overland flow velocity and soil aggregate transport observed with digital videography

Field experiments at Tiramoana station 30 km north of Christchurch, New Zealand using an erosion plot 16·5 m long, 0·6 m wide, and with a slope of 14–14·5° on rendzina soil aimed to measure the variability of flow velocity and of soil aggregates transport rate in shallow overland flow. Discharge/cross‐section area ratio was used to estimate mean velocity, and high‐speed digital video camera and image analysis provided information about flow and sediment transport variability. Six flow runs with 0·5–3·0 L s^?1 discharges were supercritical with Froude numbers close to or more than 1. Mean flow velocity followed Poiseuille law, float numbers were more than 1·5 and hydraulic resistance was an inverse proportional function of the Reynolds number, which is typical for laminar flows. Hence actual velocity varied through time significantly and the power spectrum was of ‘red‐noise’, which is typical for turbulent flow. Sediment transport rates had even higher variability, and soil aggregates transport was a compound Poisson process. Copyright © 2008 John Wiley & Sons, Ltd.     

Evaluating different GCMs for predicting spatial recharge in an irrigated arid region

Groundwater systems in arid regions will be particularly sensitive to climate change owing to the strong dependence of rates of evapotranspiration on temperature, and shifts in the precipitation regimes. Irrigation use in these arid regions is typically a large component of the water budget, and may increase due to changes in soil moisture resulting from higher temperatures and changes in the timing of precipitation events. In this study, future predicted climate change scenarios from three global climate models (CGCM1 GHG+A1, CGCM3.1 A2, and HadCM3 A2) are used to determine the sensitivity of recharge to different climate models in an irrigated agricultural region. The arid Oliver region (annual precipitation 300 mm) in the Okanagan Basin, British Columbia, is used to demonstrate the approach. Irrigation return flow, as a contribution to total diffuse recharge, is simulated by calculating the daily applied irrigation based on estimates of seasonal crop water demand and the forecasted precipitation and evaporation data. The relative contribution of irrigation return flow to groundwater recharge under current and future climate conditions is modelled. Temperature data were downscaled using Statistical Downscaling Model (SDSM), while precipitation and solar radiation changes were estimated directly from the GCM data. Shifts in climate, from present to future predicted, were applied to a stochastic weather generator, and used to force a one-dimensional hydrologic model, HELP 3.80D. Results were applied spatially, according to different soil profiles, slope and vegetation, over a 22.5 km by 8.6 km region. Changes to recharge in future time periods for each GCM result in modest increases of recharge with the peak recharge shifting from March to February. Lower recharge rates and higher potential evapotranspiration rates are similarly predicted by all three models for the summer months. All scenarios show that the potential growing season will expand between 3 and 4 weeks due to increases in temperature. However, the magnitude of the change varies considerably between models. CGCM3.1 has the largest increases of recharge rates, CGCM1 has very minor increases, and HadCM3 is relatively stable (as indicated by the near-zero changes between climate states). The significant differences between these three models indicate that prediction of future recharge is highly dependent on the model selected. The minor increase of annual recharge in future predicted climate states is due the shift of peak recharge from increased temperature. Irrigation rates dominate total recharge during the summer months in this arid area. Recharge in irrigated areas is significantly higher than natural recharge, with irrigation return flow between 25% and 58%. A comparison of recharge results for the least efficient and the most efficient irrigation systems indicates that the latter are more sensitive to choice of GCM.     

Assessing impacts of invasive phytoplankton: The Baltic Sea case

There is an increasing understanding and requirement to take into account the effects of invasive alien species (IAS) in environmental quality assessments. While IAS are listed amongst the most important factors threatening marine biodiversity, information on their impacts remains unquantified, especially for phytoplankton species. This study attempts to assess the impacts of invasive alien phytoplankton in the Baltic Sea during 1980-2008. A bioinvasion impact assessment method (BPL - biopollution level index) was applied to phytoplankton monitoring data collected from eleven sub-regions of the Baltic Sea. BPL takes into account abundance and distribution range of an alien species and the magnitude of the impact on native communities, habitats and ecosystem functioning. Of the 12 alien/cryptogenic phytoplankton species recorded in the Baltic Sea only one (the dinoflagellate Prorocentrum minimum) was categorized as an IAS, causing a recognizable environmental effect.     

Determining the depth and location of potential field sources without specifying the structural index

There are many semiautomatic interpretation methods for potential field data. Some only work for a specific model, such as a contact or dyke, while others can be applied to any structure which has a known structural index (S.I.) (which gives the rate of decrease with distance of the amplitude of the anomaly). Various strategies exist for the automatic determination of the S.I., some of which involve inversion, or the use of data from different altitudes. A simple new method of determining the depth, location, and S.I. of potential field sources is introduced here and demonstrated on potential field data from South Africa.     

Periglacial landscape evolution and environmental changes of Arctic lowland areas for the last 60 000 years (western Laptev Sea coast, Cape Mamontov Klyk)

Non-glaciated Arctic lowlands in north-east Siberia were subjected to extensive landscape and environmental changes during the Late Quaternary. Coastal cliffs along the Arctic shelf seas expose terrestrial archives containing numerous palaeoenvironmental indicators (e.g., pollen, plant macro-fossils and mammal fossils) preserved in the permafrost. The presented sedimentological (grain size, magnetic susceptibility and biogeochemical parameters), cryolithological, geochronological (radiocarbon, accelerator mass spectrometry and infrared-stimulated luminescence), heavy mineral and palaeoecological records from Cape Mamontov Klyk record the environmental dynamics of an Arctic shelf lowland east of the Taymyr Peninsula, and thus, near the eastern edge of the Eurasian ice sheet, over the last 60 Ky. This region is also considered to be the westernmost part of Beringia, the non-glaciated landmass that lay between the Eurasian and the Laurentian ice caps during the Late Pleistocene. Several units and subunits of sand deposits, peat–sand alternations, ice-rich palaeocryosol sequences (Ice Complex) and peaty fillings of thermokarst depressions and valleys were presented. The recorded proxy data sets reflect cold stadial climate conditions between 60 and 50 Kya, moderate inderstadial conditions between 50 and 25 Kya and cold stadial conditions from 25 to 15 Kya. The Late Pleistocene to Holocene transition, including the Allerød warm period, the early to middle Holocene thermal optimum and the late Holocene cooling, are also recorded. Three phases of landscape dynamic (fluvial/alluvial, irregular slope run-off and thermokarst) were presented in a schematic model, and were subsequently correlated with the supraregional environmental history between the Early Weichselian and the Holocene.     

Genetic diversity and metal tolerance of two marine species: a comparison between populations from contaminated and reference sites

Long-term contamination of the marine environment surrounding a lead smelter offered a unique opportunity to examine how pollutants might have acted to alter genetic characteristics of populations of organisms in the receiving system. This study used random amplified polymorphic DNA analysis to compare the genetic diversity of populations of the prawn, Leander intermedius, and the isopod, Platynympha longicaudata from the smelter discharge site with reference populations. The genetic diversity of the prawn population from the smelter discharge site (Port Pirie) was lower than that found in one reference population, and not significantly different from the other two reference populations. Genetic diversity of the Port Pirie population of isopods was found to be significantly lower than that of all reference populations. Prawns and isopods were also exposed to metal mixtures in the laboratory in a similar ratio to that found in seston near the smelter effluent discharge site. Both pre-exposed and reference populations of prawns tolerated elevated levels of metals and exhibited no significant difference in response. This contrasted with the isopods, with the pre-exposed isopod population showing greater tolerance to elevated metal levels compared with the reference population. These results highlight the need to include a number of reference populations for comparative purposes in genetic diversity studies, and the need to assess the influence of pollution on the genetic diversity of more than one species if genetic diversity analyses are to be used to gauge remediation success.     

Rotation broadening of spectral features from star spots

This paper presents an extension of the method of the characteristic points by Kjurkchieva (1987, 1989). This method for the analysis of light curves of spotted stars is further developed by including spectral information. Expressions describing the variation of the rotation broadening of spectral features arising from a star spot are derived for a known spot configuration. The results are used in the solution of the inverse problem by the method of the characteristic points. It is shown that the rotation broadening of spectral features from star spots can be used to easily determine the angular size and the polar distance of a circular spot. It turns out that the equatorial velocity and radius of the spotted star can be obtained in some cases by the combined analysis of the photometric and spectral data.     

B and R photometry of AM her during 1993

The results from the simultaneous observations in B and R colours of AM Her are presented. Analysis of these data shows the following: (a) There are always two clear minima in the R light curves, while the secondary minimum in B light curves sometimes is not well defined; (b) The times of the minima in R and B colour nearly coincide; (c) The photometric period changes remarkably from cycle to cycle but its mean value remains constant; (d) Short stillstands on the increasing branches of the two minima are seen similar to those visible in UX UMa-type cataclysmic stars; (e) Besides the irregular flickering with time scale of a few minutes, a variability with a period 20.28 min in the two colours is established.     

Late Pliocene–Quaternary tectonics in the frontal part of the SE Carpathians: Insights from tectonic geomorphology

The Romanian East Carpathians display large-scale heterogeneities along the mountain belt, unusual foredeep geometries, significant post-collisional and neotectonic activity, and major variations in topography, mostly developed in the aftermath of late Miocene (Sarmatian; 11 Ma) subduction/underthrusting and continental collision between the East European/Scythian/Moesian foreland and the inner Carpathians Tisza-Dacia unit. In particular, the SE corner of the arcuate orogenic belt represents the place of still active large-scale differential vertical movements between the uplifting mountain chain and the subsiding Focşani foredeep basin. In this key area, we have analysed the configuration of the present day landforms and the drainage patterns in order to quantify the amplitude, timing and kinematics of these post-collisional late Pliocene–Quaternary vertical movements. A river network is incising in the upstream a high topography consisting of the external Carpathians nappes and the Pliocene–Lower Pleistocene sediments of the foreland. Further eastwards in the downstream, this network is cross-cutting a low topography consisting of the Middle Pleistocene–Holocene sediments of the foreland. Geological observations and well-preserved geomorphic features demonstrate a complex succession of geological structures. The late Pliocene–Holocene tectonic evolution is generally characterised by coeval uplift in the mountain chain and subsidence in the foreland. At a more detailed scale, these vertical movements took place in pulses of accelerated motion, with laterally variable amplitude both in space and in time. After a first late Pliocene uplifting period, subsidence took place during the Earliest Pleistocene resulting in a basal Quaternary unconformity. This was followed by two, quantifiable periods of increased uplift, which affected the studied area at the transition between the Carpathians orogen and the Focşani foreland basin in the late Early Pleistocene and the late Middle to late Pleistocene. Both large-scale deformation events affected the western Focşani basin flank, tilting the entire structure with 9° during the late Early Pleistocene and uplifted it as a block during the early Late Pleistocene. The late Early Pleistocene tilting resulted in 750 m uplift near the frontal monocline and by extrapolation in a presumed 3000 m uplift near the central parts of the Carpathians. The late Middle to late Pleistocene cumulative uplift reaches 250 m and correlates with a contemporaneous progradation of the uplifted areas towards the Focşani Basin. The uplifting events are separated by a second Quaternary unconformity. On the whole, the late Pliocene–Quaternary evolution of the Carpathians orogen/Focşani basin structure indicate large-scale differential uplift during the latest stages of a continuous post-collisional orogenic evolution.