Magnetic fabric of bulgarian loess sediments derived by using various sampling techniques

Summary The anistropy of low field magnetic susceptibility has been studied for seven outcrops of loess sediments in North-Eastern Bulgaria. Different sampling methods were applied in order to choose the best technique for obtaining the primary magnetic fabric of such unconsolidated sediments. AMS results show significant changes in the petrofabric of samples collected by the first technique which disturbs the original sedimentary fabric. The second applied technique does not cause such a strong deformation but some disturbance of the magnetic fabric is probable. Typical sedimentary fabric is obtained from hand samples and it is therefore concluded that this represents the best method for obtaining reliable AMS results from soft sediments.     

Very high strains recorded in mylonites along the Alpine Fault, New Zealand: implications for the deep structure of plate boundary faults

Oblique displacement on the Alpine Fault, which forms the principal structure along the Australian–Pacific plate boundary in South Island, New Zealand, has resulted in exhumation of a kilometre-wide mylonite zone in the hanging wall adjacent to the current brittle fault trace. The mylonites formed under amphibolite facies conditions at depths of ca. 25 km and have been uplifted during the past 5 Ma. A suite of 65–70 Ma pegmatite veins in the hanging wall Alpine schists has been progressively deformed within the mylonite zone and sheared out over a strike length of ca. 100 km. Measurements of the thickness distribution of the pegmatite veins within the non-mylonitised schists and at three localities within the progressively strained mylonites have been used to estimate strain values within the mylonites. The thicknesses approximate a log-normal distribution, with a mean value that is progressively reduced through the protomylonites, mylonites and ultramylonites. By assuming that the thickness distribution currently observed in the schists was the same for the pegmatites within the mylonites before strain, a model of deformation incorporating simple shear and simultaneous pure shear is used to strain the undeformed veins until a fit is obtained with the strained distributions. Shear strains calculated range from 12 to 22 for the protomylonites, 120 to 200 for the mylonites and 180 to 300 for the ultramylonites, corresponding to pure shear values of 1–3 in each case. These values are compatible with the strains predicted if most of the surface displacement on the fault over the past 5 Ma were accommodated within a 1–2-km-wide mylonite zone through the middle and lower crusts. The results suggest that processes such as erosional focussing of deformation and thermal weakening may cause intense strain localisation within the lower crust, with plate boundary deformation restricted to narrow zones rather than becoming increasingly distributed over a widening shear zone with depth.     

Stratigraphic and structural expression of the lateral growth of thrust fault-propagation folds: results and implications from kinematic modelling

In order to better understand the development of thrust fault‐related folds, a 3D forward numerical model has been developed to investigate the effects that lateral slip distribution and propagation rate have on the fold geometry of pre‐ and syn‐tectonic strata. We consider a fault‐propagation fold in which the fault propagates upwards from a basal decollement and along‐strike normal to transport direction. Over a 1 Ma runtime, the fault reaches a maximum length of 10 km and accumulates a maximum displacement of 1 km. Deformation ahead of the propagating fault tip is modelled using trishear kinematics while backlimb deformation is modelled using kink‐band migration. The applicability of two different lateral slip distributions, namely linear‐taper and block‐taper, are firstly tested using a constant lateral propagation rate. A block‐taper slip distribution replicates the geometry of natural fold‐thrusts better and is then used to test the sensitivity of thrust‐fold morphology to varied propagation rates in a set of fault‐propagation folds that have identical final displacement to length (D_max/L_max) ratios. Two stratigraphic settings are considered: a model in which background sedimentation rates are high and no topography develops, and a model in which a topographic high develops above the growing fold and local erosion, transport and deposition occur. If the lateral propagation rate is rapid (or geologically instantaneous), the fault tips quickly become pinned as the fault reaches its maximum lateral extent (10 km), after which displacement accumulates. In both stratigraphic settings, this leads to strike‐parallel rotation of the syn‐tectonic strata near the fault tips; high sedimentation rates relative to rates of uplift result in along‐strike thinning over the structural high, while low sedimentation rates result in pinchout against it. In contrast, slower lateral propagation rates (i.e. up to one order of magnitude greater than slip rate) lead to the development of along‐strike growth triangles when sedimentation rates are high, whereas when sedimentation rates are low, offflap geometries result. Overall we find that the most rapid lateral propagation rates produce the most realistic geometries. In both settings, time‐equivalent units display both nongrowth and growth stratal geometries along‐strike and the transition from growth to nongrowth has the potential to delineate the time of fault/fold growth at a given location. This work highlights the importance of lateral fault‐propagation and fault tip pinning on fault and fold growth in three dimensions and the complex syn‐tectonic geometries that can result.     

STATISTICAL CONCEPTS AND THEIR APPLICATION IN PHOTOGRAMMETRY AND SURVEYING (CONTINUED)

Inner constraints, generalised matrix inverses and S-transformations are described in relation to least squares estimation of spatial positions. A simple example is used to illustrate some of the theory. The various roles and properties of covariance functions and matrices are presented with a discussion of their practical determination and use in least squares interpolation and collocation.     

Reappraisal of great historical earthquakes in the northern Chile and southern Peru seismic gaps

A critical reappraisal of great historical interplate earthquakes in the occidental margin of South America, including southern Peru and northern Chile, is carried out.A spacetime distribution of the earthquakes associated to the seismotectonics regions defined by the rupture zones of the greatest events (1868, Mw = 8.8 and 1877, Mw = 8.8) is obtained. Both regions are seismic gaps that are in the maturity state of their respective earthquake cycles. The region associated to the 1868 earthquake presents a notable seismic quiescence in the present century.     

Greenschist amphiboles from Haast river,New Zealand

A section across the Haast Schist Group in the Southern Alps of New Zealand shows a sequence of metamorphosed eugeosynclinal sediments. Meta-basic rocks (greenschists) have been studied to determine the nature of the actinolite-hornblende transition and to investigate the change in amphibole composition through the Metamorphic Facies Series.Electron microprobe analyses of 21 representative amphiboles, including 3 amphibole pairs can be shown to support theories of a miscibility break in the calciferous amphibole solid solution series. The existence of a miscibility break is further supported by the widespread appearance, even at low metamorphic grades, of exsolution lamellae in actinolite and hornblende amphiboles.Amphibolite facies amphiboles differ from greenschist facies amphiboles in that (a) there are increased amounts of Ti entering the lattice and (b) that there is an increased occupancy of the A site at higher metamorphic grades.     

Aspects of the mineralogy and hydrometallurgy of chrysocolla,with special reference to the Cuajone,Peru, ores

Chrysocolla in the Cuajone ores appears to be microcrystalline and to exhibit a fibrous structure.Sulphuric acid leaching of the chrysocolla is facilitated by a microcracked surface structure. A marked surface structural change is evidenced as hydrogen ions replace the copper. The end result is a noncontinuous surface layer of silica from which the copper has been essentially completely removed.The results of this study provide confirmatory evidence for the structure and hydrometallurgy of chrysocolla.     

Rb/Sr isotopic and geochemical evolution of a recrystallized shear (mylonite) zone at Broken Hill

Relatively narrow (1 to 1,000 metres) planar zones of intense shear deformation and retrograde metamorphism (retrograde shist zones, RSZ) are common in the Willyama Complex around Broken Hill. A Rb/Sr isotopic study of one of these zones has revealed an unexpected isotopic pattern. All of the analysed points lie to the left of and above the 1665 Ma isochron of the Potosi Gneiss host. This result indicates a different isotopic composition of the zone as a whole rather than a chemical redistribution of Potosi Gneiss within a closed system. The isochron plot scatter is similar to that of ubiquitous metamorphic pegmatites in the basement of the Broken Hill region. The shear zone observation, however, is shown to be unrelated to the pegmatite segregation process and requires the introduction, by elemental exchange, of a more radiogenic strontium, whilst maintaining relatively fixed Rb/Sr ratios. Significant proportions of SiO₂, K₂O and Ba were removed at the same time. Na₂O, Al₂O₃, TiO₂, MgO, P₂O₅, Zr, Ni, Sc, Y, Nb, Rb remain essentially constant after allowing for volume loss of the removed elements. CaO and Sr increase slightly overall.This pattern of elemental exchange is consistent with the breakdown of K-feldspar to muscovite and the essentially isochemical recrystallization of the other major phases (quartz, plagioclase and biotite) that are observed petrographically. Silica produced by the K-feldspar breakdown and a significant amount of the free quartz must also have been removed. Large scale fluid transport is required to achieve these results.The total rock isochron gives no indication of the age of the retrograde events. However two biotite-total rock joins indicate that the last internal isotopic redistribution occurred 458 Ma ago, shortly after the time of a regional low grade metamorphism. ⁸⁷Sr/⁸⁶Sr v 100/⁸⁶Sr plots confirm that a mixing process took place at about this time and not at 1,490 Ma or the present day.The introduced fluid had an ⁸⁷Sr/⁸⁶Sr ratio of about 0.794. If this figure still represents the original source value then it has come from what was long established mature crust at 458 Ma and not the mantle. The large fluid volumes required for the silica dissolution preclude a source in the local rock porosity, and suggest a meteoric fluid which has reacted extensively with the Willyama Complex metamorphics.