Observations of vertical ground accelerations exceeding gravity during the 1997 Umbria-Marche (central Italy) earthquakes

We found extensive evidence that the vertical ground accelerations produced during the largest shock (M = 6.0) of the 1997 Umbria-Marche earthquake sequence exceeded 1g in two areas close to the heavily-damaged villages of Annifo and Colle Croce. This evidence comes from the striking observation of thousands of freshly fractured and broken rocks and stones in these areas. Some of the broken stones lie isolated on soft detritic soil while others had been previously piled up, probably a long time agoto clear the fields for farming. The freshness of the cuts and fractures and the consistency of the observations for thousands of rocks and stones in these areas indicate that these rocks were thrown upwards during the earthquake, with breakage occurring at the time of impact. Ground motion calculations consistent with the static deformation inferred from GPS and interferometry data, show that the broken stones and rocks are found in the zone where the strongest shaking took place during the earthquake and that most of the shaking there was vertical.     

Transport of three herbicides in ground water at Twin Lake test site,Chalk River,Ontario, Canada

A field tracer test performed under natural flow conditions at the Twin Lake test site, Chalk River Laboratories of the Atomic Energy of Canada Ltd. in Chalk River, Ontario, Canada, using tritium and three herbicides (Chlortoluron, Terbuthylazine, and Pendimethalin) was interpreted using the dispersion equation with a combined reaction model. The reaction model couples an instantaneous equilibrium reaction governed by a linear adsorption isotherm with a reversible or irreversible kinetic reaction of the first order, and decay. An improved interpretation method consists of a simultaneous fitting of theoretical concentration and mass-recovery curves to the experimental data, which leads to a more reliable determining of reaction models and improves the accuracy of fitting. Tritium served as the reference tracer to determine the flow velocity, dispersivity, and the recovery of the herbicides. Chlortoluron was slightly delayed by equilibrium exchange with strongly reduced concentration due to an irreversible kinetic reaction and/or decay. Terbuthilazine was slightly delayed by equilibrium exchange, with strongly reduced concentration due to a reversible kinetic reaction with some influence of decay. A strong equilibrium reaction and a strong reversible kinetic reaction without degradation governed the transport of Pendimethalin, reducing considerably its concentration. The results obtained show that simulations based only on Kd and decay constant, especially if these parameters are found in the laboratory, may considerably differ from those performed with reaction parameters determined in properly performed field tests. The dominant reaction types, and the values of parameters found in the study, supply useful information on the transport of the investigated herbicides in sandy aquifers under natural flow conditions.     

Linking Tarim Basin sea retreat (west China) and Asian aridification in the late Eocene

The Tarim Basin in western China formed the easternmost margin of a shallow epicontinental sea that extended across Eurasia and was well connected to the western Tethys during the Paleogene. Climate modelling studies suggest that the westward retreat of this sea from Central Asia may have been as important as the Tibetan Plateau uplift in forcing aridification and monsoon intensification in the Asian continental interior due to the redistribution of the land‐sea thermal contrast. However, testing of this hypothesis is hindered by poor constraints on the timing and precise palaeogeographic dynamics of the retreat. Here, we present an improved integrated bio‐ and magnetostratigraphic chronological framework of the previously studied marine to continental transition in the southwest Tarim Basin along the Pamir and West Kunlun Shan, allowing us to better constrain its timing, cause and palaeoenvironmental impact. The sea retreat is assigned a latest Lutetian–earliest Bartonian age (ca. 41 Ma; correlation of the last marine sediments to calcareous nannofossil Zone CP14 and correlation of the first continental red beds to the base of magnetochron C18r). Higher up in the continental deposits, a major hiatus includes the Eocene–Oligocene transition (ca. 34 Ma). This suggests the Tarim Basin was hydrologically connected to the Tethyan marine Realm until at least the earliest Oligocene and had not yet been closed by uplift of the Pamir–Kunlun orogenic system. The westward sea retreat at ca. 41 Ma and the disconformity at the Eocene–Oligocene transition are both time‐equivalent with reported Asian aridification steps, suggesting that, consistent with climate modelling results, the sea acted as an important moisture source for the Asian continental interior.     

Airborne radar and in-situ observations of a shallow stratus with drizzle

Observations were made of a shallow stratus of upslope origin using an aircraft equipped with insitu probes and with a vertically-pointing radar of 3-mm wavelength. A cloud layer of 300 m thickness was found below the inversion; an additional layer of 100 m thickness was located within the inversion. The coldest temperature within the cloud was -2°C and the cloud contained no ice particles. Drizzle drops up to 180 Am were present in both cloud layers.The observations reveal precipitation and air motion structures of approximately 1 km horizontal dimensions. The origin of this organization appears to be weak convection. In addition, mixing played an important role in forming the cloud droplet and drizzle drop size distributions.     

T-XCO2 stability relations and phase equilibria of a calcic carbonate scapolite

At a total pressure of 5 kb, calcic, Cl-free scapolite (Me₈₃) is stable relative to plagioclase-bearing assemblages at $\text{T ≧ 625°C}$, . With decreasing temperature, scapolite breaks down to plagioclase + calcite. Scapolite is replaced by plagioclase + grossular + cancrinite + CO₂ in the presence of H₂O-rich fluids. The stable coexistence of scapolite and calcite, an assemblage typical of most natural occurrences of calcic scapolite, is limited by the reaction: scapolite + calcite → grossular + cancrinite + CO₂, which occurs at 750°C, X_CO2 = 0.46; 700°C, X_CO2 = 0.33; 650°C, X_CO2 = 0.18, for the chosen bulk composition.Generalization of the experimental results to encompass the complete range of fully carbonated scapolite compositions indicates that mizzonite (Me₇₅) has the largest T-X_CO2 stability field. For scapolite more calcic than mizzonite, stable growth is restricted to conditions of increasingly higher temperature and X_CO2.The experimental results are consistent with various petrologic features of scapolite-bearing rocks, particularly scapolite-clinopyroxene granulites, and indicate that such rocks were formed in the presence of CO₂-rich fluids.     

Magnetohydrodynamic oscillations due to precessional motion

Summary The motion of a non-viscous liquid medium with an ideal electrical conductivity, enclosed in the ellipsoidal cavity of an envelope subject to precessional motion, is investigated. Inside the cavity there is a toroidal magnetic field. It is proved that the precessional motion of the envelope generates forced oscillations of the medium with a period of 24 hours and two different types of eigen oscillations. Expressions for computing the amplitudes and frequencies of all types of oscillations are derived. The maximum values of disturbance fields are determined for geophysically acceptable parameters.     

Na2O solubility in CaO-MgO-SiO2 melts

The sodium solubility in silicate melts in the CaO-MgO-SiO₂ (CMS) system at 1400 °C has been measured by using a closed thermochemical reactor designed to control alkali metal activity. In this reactor, Na_(g) evaporation from a Na₂O-xSiO₂ melt imposes an alkali metal vapor pressure in equilibrium with the molten silicate samples. Because of equilibrium conditions in the reactor, the activity of sodium-metal oxide in the molten samples is the same as that of the source, i.e., aNa₂O_(sample) = aNa₂O_(source). This design also allows to determine the sodium oxide activity coefficient in the samples. Thirty-three different CMS compositions were studied. The results show that the amount of sodium entering from the gas phase (i.e., Na₂O solubility) is strongly sensitive to silica content of the melt and, to a lesser extent, the relative amounts of CaO and MgO. Despite the large range of tested melt compositions (0 < CaO and MgO < 40; 40 < SiO₂ < 100; in wt%), we found that Na₂O solubility is conveniently modeled as a linear function of the optical basicity (Λ) calculated on a Na-free basis melt composition. In our experiments, γNa₂O_(sample) ranges from 7 × 10⁻⁷ to 5 × 10⁻⁶, indicating a strongly non-ideal behavior of Na₂O solubility in the studied CMS melts (γNa₂O_(sample) ? 1). In addition to showing the effect of sodium on phase relationships in the CMS system, this Na₂O solubility study brings valuable new constraints on how melt structure controls the solubility of Na in the CMS silicate melts. Our results suggest that Na₂O addition causes depolymerization of the melt by preferential breaking of Si-O-Si bonds of the most polymerized tetrahedral sites, mainly Q⁴.     

MINI-MACtm—A new generation dual—Band surveyor

Summary Litton Divisions presently produce both high accuracy GPS surveyors and low—cost GPS navigation sets. Aero Service'sMACROMETER ^R Interferometric Surveyors, have become the standard against which GPS surveying equipment is measured. Litton Aero Products has developed a highly digitized, low costL ₁,C/A code GPS card set. The integration of these technologies had led to the development of a low-cost, high-precision, GPS survey system which can be configured with or without a codelessL ₂ capability. TheMINI-MAC surveying system is the first member of the new generation of GPS survey systems resulting from this joint development. The system design is described in this paper, and initial survey test results using a prototypeMINI-MAC surveying system are presented.