Dust ejection from planetary bodies by temperature gradients: Laboratory experiments

Laboratory experiments show that dusty bodies in a gaseous environment eject dust particles if they are illuminated. We find that even more intense dust eruptions occur when the light source is turned off. We attribute this to a compression of gas by thermal creep in response to the changing temperature gradients in the top dust layers. The effect is studied at a light flux of 13 kW/m² and 1 mbar ambient pressure. The effect is applicable to protoplanetary disks and Mars. In the inner part of protoplanetary disks, planetesimals can be eroded especially at the terminator of a rotating body. This leads to the production of dust which can then be transported towards the disk edge or the outer disk regions. The generated dust might constitute a significant fraction of the warm dust observed in extrasolar protoplanetary disks. We estimate erosion rates of about 1 kg s^?1 for 100 m parent bodies. The dust might also contribute to subsequent planetary growth in different locations or on existing protoplanets which are large enough not to be susceptible to particle loss by light induced ejection. Due to the ejections, planetesimals and smaller bodies will be accelerated or decelerated and drift outward or inward, respectively. The effect might also explain the entrainment of dust in dust devils on Mars, especially at high altitudes where gas drag alone might not be sufficient.     

Spatial and temporal evolution of soft and hard X-ray emission in a solar flare

We study the spatial and temporal characteristics of the 3.5 to 30.0 keV emission in a solar flare on April 10, 1980. The data were obtained by the Hard X-ray Imaging Spectrometer aboard the Solar Maximum Mission Satellite. It is complemented in our analysis with data from other instruments on the same spacecraft, in particular that of the Hard X-ray Burst Spectrometer.Key results of our investigation are: (a) Continuous energy release is needed to substain the increase of the emission through the rising phase of the flare, before and after the impulsive phase in hard X-rays. The energy release is characterized by the production of hot (5 × 10⁷ T 1.5 × 10⁸ K) thermal regions within the flare loop structures. (b) The observational parameters characterizing the impulsive burst show that it is most likely associated with non-thermal processes (particle acceleration). (c) The continuous energy release is associated with strong chromospheric evaporation, as evidenced in the spectral line behavior determined from the Bent Crystal Spectrometer data. Both processes seem to stop just before flare maximum, and the subsequent evolution is most likely governed by the radiative cooling of the flare plasma.     

1998 Eruption at Volcán Cerro Azul, Galápagos Islands: I. Syn-Eruptive Petrogenesis

The 1998 eruption of Volcán Cerro Azul in the Galápagos Islands produced two intra-caldera vents and a flank vent that erupted more than 1.0×10⁸ m³ of lava. Lava compositions changed notably during the 5-week eruption, and contemporaneous eruptions in the caldera and on the flank produced different compositions. Lavas erupted from the flank vent range from 6.3 to 14.1% MgO, nearly the entire range of MgO contents previously reported from the volcano. On-site monitoring of eruptive activity is linked with petrogenetic processes such that geochemical variations are evaluated in a temporal context. Lavas from the 1998 eruption record two petrogenetic stages characterized by progressively more mafic lavas as the eruption proceeded. Crystal compositions, whole rock major and trace element compositions, and isotope ratios indicate that early lavas are the product of mixing between 1998 magma and remnant magma of the 1979 eruption. Intra-caldera lavas and later lavas have no 1979 signature, but were produced by the 1998 magma incorporating olivine and clinopyroxene xenocrysts. Thus, early magma petrogenesis is characterized by mixing with the 1979 magma, followed by the magma progressively entraining wehrlite cumulate mush.Editorial Responsibility: M.R. Carroll     

Electron paramagnetic resonance spectroscopy: A suggested approach to trace metal analysis in marine environments

Electron paramagnetic resonance (EPR) spectroscopy analysis of marine samples from different environments appears to differentiate between adsorbed and structural Mn (II) and Fe (III) sites in the sediment. This suggests that EPR may provide a means of distinguishing different environmental influences on sediment. Acid extract solutions from sediment samples exhibit clearly defined EPR spectra due to Mn(II), Ti(III), Fe(III), and VO(IV), which are amenable to qualitative and quantitative analysis at concentrations below one part per million. Spectra of several shellfish vary considerably, both between species, and within a species, depending on sampling localities. Resonances from Mn(II), Mo(V), and Fe(III) can be obtained. Mn(II) is substituted for Ca(II) in the calcite structure of some shells. The low detection limits, small sample size, required and identification of oxidation states by EPR complement other analytical techniques and may prove useful in marine systems.     

Sediment and particulate phosphorus characteristics in grassed waterways from row crop corn and alfalfa fields collected by manual University of Exeter samplers and automatic sampling

Phosphorus (P) export from agricultural lands above known threshold levels can result in adverse impacts to receiving water quality. Phosphorus loss occurs in dissolved and sediment‐bound, or particulate phosphorous (PP), forms, with the latter often dominating losses from row‐cropped systems. To target practices, land managers need good computer models and model developers need good monitoring data. Sediment monitoring data (e.g. radiometric finger printing and sediment P sorption capacity) can help identify sediment source areas and improve models, but require more sediment mass than is typically obtained by automatic sampling. This study compares a simple suspended sediment sampler developed at the University of Exeter (UE) with automatic sampling in intermittent channels draining corn and alfalfa fields. The corn field had a greater runoff coefficient (27%) than alfalfa (11%). No differences were found in enrichment ratios (sediment constituent/soil constituent) in PP (PP_ER) or percent loss on ignition (LOI_ER) between paired UE samplers on corn. The median LOI_ER for the UE samplers (1·9%) did not differ significantly (p > 0·13) from the automatic sampler (2·0%). The PP_ER from the UE samplers was on average 20% lower than the automatic samplers. A correlation (r² = 0·75) was found between sediment PP and % LOI from automatic samplers and UE samplers for particles < 50 µm, while for > 50 µm PP concentration did not change with changes in % LOI. Sediment ammonium‐oxalate extractable metals were similarly related to LOI, with the strongest correlation for iron (r² = 0·71) and magnesium (r² = 0·70). Copyright © 2011 John Wiley & Sons, Ltd.     

Simulating stochastically excited oscillations: The mode lifetime of ξ Hya

The discovery of solar-like oscillations in the giant star ξ Hya (G7 III) was reported by Frandsen et al. (2002). Their frequency analysis was very limited due to alias problems in the data set (caused by single-site observations). The extent to which the aliasing affected their analysis was unclear due to the unknown damping time of the stellar oscillation modes. In this paper we describe a simulator created to generate time series of stochastically excited oscillations, which takes as input an arbitrary window function and includes both white and non-white noise. We also outline a new method to compare a large number of simulated time series with an observed time series to determine the damping time, amplitude, and limited information on the degree of the stochastically excited modes. For ξ Hya we find the most likely amplitude to be ∼ 2 m s⁻¹, in good agreement with theory (Houdek and Gough, 2002), and the most likely damping time to be ∼ 2 days, which is much shorter than the theoretical value of 15–20 days calculated by Houdek and Gough (2002).     

Paraglacial response of steep,sediment‐mantled slopes to post‐‘Little Ice Age’ glacier recession in the central Swiss Alps

This research assesses the morphological consequences of recent (post‐‘Little Ice Age’) paraglacial reworking of valley‐side sediment mantles in the European Alps. It aims to identify the extent and conditioning factors of slope adjustment at sites in the Swiss Alps, model the temporal pattern, and assess the rates of sediment reworking involved. Gully systems have cut into steep, high‐level lateral moraines, and debris cones have accumulated downslope. Debris flow is the dominant agent of sediment transfer. Factors controlling the extent of this activity include moraine slope gradient, relief and moisture availability. Gullies appear to have reached their maximum dimensions within ca. 50 yr of deglaciation, after which gully relief is reduced by removal of inter‐gully slopes and gully infilling (within 80–140 yr). On the most recently deglaciated terrain, minimum erosion rates average ca. 95 mm yr^?1 since gully initiation, greatly exceeding ‘normal’ erosion rates in other environments. Mean annual accumulation of a single debris cone since ice retreat was calculated to be ca. 30 mm yr^?1. Implications of these findings are applied to patterns of paraglacial sediment‐mantled slope adjustment, conceptualising paraglacial landscape response in terms of a sediment release exhaustion model, and paraglacial landform succession. Copyright © 2005 John Wiley & Sons, Ltd.     

RHESSI Observation of Atmospheric Gamma Rays from Impact of Solar Energetic Particles on 21 April 2002

The RHESSI high-resolution spectrometer detected γ-ray lines and continuum emitted by the Earth's atmosphere during impact of solar energetic particles in the south polar region from 16:00–17:00 UT on 21 April 2002. The particle intensity at the time of the observation was a factor of 10–100 weaker than previous events when gamma-rays were detected by other instruments. This is the first high-resolution observation of atmospheric gamma-ray lines produced by solar energetic particles. De-excitation lines were resolved that, in part, come from ¹⁴N at 728, 1635, 2313, 3890, and 5106 keV, and the ¹²C spallation product at ∼ 4439 keV. Other unresolved lines were also detected. We provide best-fit line energies and widths and compare these with moderate resolution measurements by SMM of lines from an SEP event and with high-resolution measurements made by HEAO 3 of lines excited by cosmic rays. We use line ratios to estimate the spectrum of solar energetic particles that impacted the atmosphere. The 21 April spectrum was significantly harder than that measured by SMM during the 20 October 1989 shock event; it is comparable to that measured by Yohkoh on 15 July 2000. This is consistent with measurements of 10–50 MeV protons made in space at the time of the γ-ray observations.     

Effects of land‐cover changes on the hydrological response of interior Columbia River basin forested catchments

The topographically explicit distributed hydrology–soil–vegetation model (DHSVM) is used to simulate hydrological effects of changes in land cover for four catchments, ranging from 27 to 1033 km², within the Columbia River basin. Surface fluxes (stream flow and evapotranspiration) and state variables (soil moisture and snow water equivalent) corresponding to historical (1900) and current (1990) vegetation are compared. In addition a sensitivity analysis, where the catchments are covered entirely by conifers at different maturity stages, was conducted. In general, lower leaf‐area index (LAI) resulted in higher snow water equivalent, more stream flow and less evapotranspiration. Comparisons with the macroscale variable infiltration capacity (VIC) model, which parameterizes, rather than explicitly represents, topographic effects, show that runoff predicted by DHSVM is more sensitive to land‐cover changes than is runoff predicted by VIC. This is explained by model differences in soil parameters and evapotranspiration calculations, and by the more explicit representation of saturation excess in DHSVM and its higher sensitivity to LAI changes in the calculation of evapotranspiration. Copyright © 2002 John Wiley & Sons, Ltd.     

Assessing the Completeness of Bicycle Trail and Lane Features in OpenStreetMap for the United States

This article assesses the completeness of bicycle trail and on‐street lane features in OpenStreetMap (OSM). Comparing OSM cycling features with reference data from local planning agencies for selected US Urbanized Areas shows that OSM bicycle trails tend to be more completely mapped than bicycle lanes. Manual evaluation of mapped cycling features in OSM and Google Maps for selected test areas within the Central Business Districts of Portland (OR) and Miami (FL) through comparison with governmental datasets, satellite imagery, and Google Street View, shows that the Bicycle layer in Google Maps can help to identify some missing or erroneously mapped OSM cycling links. However, Google Maps was also found to have some gaps in its data layers, suggesting that consultation of current trail and lane data from local planning authorities, if available, should be considered as an additional data source for bicycle related planning projects.