Rapid and cyclic aeolian deposition during the Last Glacial in European loess: a high-resolution record from Nussloch, Germany

This paper reports the results of an investigation of the Weichselian Upper Pleniglacial loess sequences of Nussloch (Rhine Valley, Germany) based on stratigraphy, palaeopedology, sedimentology, palynology, malacology and geochemistry (δ¹³C), supported by radiocarbon, TL and OSL dating. Grain-size and magnetic susceptibility records are taken at 5 cm intervals from the Upper Pleniglacial (UPG) loess. The data indicate cyclic variations in loess deposition between ca 34 and 17 ka, when the sedimentation rate is especially high (1.0–1.2 m per ka for more than 10 m). The grain-size index (GSI: ratio of coarse silt versus fine silt and clay) shows variations, which are assumed to be an indirect measurement of wind intensity. The sedimentation rate, interpreted from the profiles, indicates high values in loess (Loess events LE-1 to LE-7) and low or negligible values in tundra gley horizons G1 to G8. OSL ages from the loess and ¹⁴C dates from organic matter in the loess show that loess deposition was rapid but was interrupted by shorter periods of reduced aeolian sedimentation. Comparison between the data from Nussloch and other European sequences demonstrates a progressive coarsening of the loess deposits between ca 30 and 22 ka. This coarsening trend ends with a short but major grain-size decrease and is followed by an increase to a new maximum at 20 ± 2 ka (“W” shape). Correlation between the loess GSI and the Greenland ice-core dust records, suggests a global connection between North Atlantic and Western European global atmospheric circulation and wind regimes. In addition, the typical Upper Pleniglacial loess deposition begins at ca 30–31 ka, close to Heinrich event (HE) 3, and the main period of loess sedimentation at about 25 ± 2 ka is coeval to HE 2. Correlation of magnetic susceptibility and grain-size records shows that the periods, characterised by high GSI, coincide with an increase in the amount of ferromagnetic minerals reworked from the Rhine alluvial plain. They suggest enhancement in the frequency of the storms from N–NW. These results are integrated within a palaeogeographical model of dust transport and deposition in Western Europe for the Weichselian Upper Pleniglacial (or Late Pleniglacial).     

A Compilation of Silicon,Rare Earth Element and Twenty‐One other Trace Element Concentrations in the Natural River Water Reference Material SLRS‐5 (NRC‐CNRC)

The natural river water certified reference material SLRS‐5 (NRC‐CNRC) was routinely analysed in this study for major and trace elements by ten French laboratories. Most of the measurements were made using ICP‐MS. Because no certified values are assigned by NRC‐CNRC for silicon and 35 trace element concentrations (rare earth elements, Ag, B, Bi, Cs, Ga, Ge, Li, Nb, P, Rb, Rh, Re, S, Sc, Sn, Th, Ti, Tl, W, Y and Zr), or for isotopic ratios, we provide a compilation of the concentrations and related uncertainties obtained by the participating laboratories. Strontium isotopic ratios are also given.     

A luminescence‐based chronology for the Harletz loess sequence,Bulgaria

The Harletz loess‐palaeosol sequence is located in northwestern Bulgaria and represents an important link between well‐studied loess sequences in eastern Romania and further sites to the west of the Carpathians (e.g. Serbia and Hungary). The aim of this study was to establish a chronostratigraphy of the deposits, using various methods of luminescence dating, together with basic stratigraphical field observations as well as magnetic properties. Luminescence dating was carried out using the quartz fine grain fraction and a SAR protocol, and the feldspar coarse grain fraction, applying the MET‐pIRIR protocol. Due to underestimation of the quartz fine grain fraction in the lower parts of the sequence, the resulting chronology is mainly based on the feldspar ages, which are derived from the stimulation temperature at 150 °C. A comparison with nearby sequences from Serbia, Hungary and Romania, and interpretations obtained through the stratigraphical and sedimentological signature of the sequence, supports the established chronology. Our data suggest that the prominent palaeosol (soil complex) in the upper quarter of the sequence was formed during MIS 5. It would follow that large parts of the Last Glacial loess overlying this palaeosol were probably eroded, and that the thick loess accumulation underlying this soil complex can be allocated to the penultimate glacial (MIS 6). A prominent MIS 6 tephra, which has been reported from other sequences in the area, is also present at Harletz.     

Does carbon finance make a sustainable difference? Hydropower expansion and livelihood trade‐offs in the Red River valley,Yunnan Province,China

The Kyoto Protocol's Clean Development Mechanism (CDM) is a carbon credit trading scheme intended to reduce anthropogenic greenhouse gas emissions and promote ‘sustainable development’. Hundreds of CDM‐sponsored hydroelectric dams have been constructed in southwest China's Yunnan Province, where carbon finance contributes substantial financial incentives to hydropower expansion. This article investigates whether riparian Handai farmers settled near the Madushan hydropower plant on the Chinese section of Red River have experienced positive outcomes from this project's participation in the CDM. I assess how Handai individuals' access to core livelihood assets has been modified following dam completion and probe how the CDM reconfigures scalar relations among the various stakeholders involved in hydropower governance in Yunnan. Though the CDM facilitates hydropower expansion, it fails to produce development that is more sustainable than ‘business as usual’ from a local perspective. Rather, the CDM consolidates hydropower governance in the same way as it unfolded in Yunnan before the province became an active participant in this scheme. The CDM also facilitates a national development campaign fostering specific socio‐economic modernization patterns in China's western provinces.     

Contribution of the 3-D visualization of acoustic borehole signals (full waveforms) to a quick formation evaluation

Logging and continuous coring are carried out when drilling and looking for materials such as gravels, sand, and clay or in order to evaluate the fracture state of a deep site intended for waste storage. However, in some cases of non-consolidated formations, the results may be disappointing because of the borehole conditions. Full waveforms, as seismic signals, provide information about physical parameters of the grounds crossed by the sonic tool, and this information is almost independent of borehole conditions. Traditional displays in variable area or density show the wave arrival times and the frequencies with depth; for variable density, a color scale permits to see clustered instantaneous phases.In order to determine precisely and simultaneously the three signal parameters (arrival time, frequency, and amplitude) in the depth-propagation time domain, a 3-D visualization software has been developed. The “view” parameters, which give a nice display of the 3-D→2-D projection of the signals in a parallel perspectives relative to depth, are estimated on the monitor screen in an interactive way. A larger size version of the software is available for displaying in detail the acoustic signals for the whole borehole. However, this program needs a large computer, and the maximum size of the drawing depends on the computer memory available for use.The comparison between traditional and 3-D displays shows that without previous preprocessing, the 3-D visualization (1) shows the very small and continuous variations of amplitude (and, therefore, of attenuation) with depth better; and (2) can bring out interferences and “energetic peaks” by simply changing the “view” parameters. As the attenuation of the different waves is directly determined, fresh zones can be distinguished immediately from fracture zones and hard ground from soft ground. The geometry of major fracturing can be deduced directly from graphical representation; i.e. open or closed, and horizontal or oblique fractures. The calculation of their “vertical thickness” is straightfoward. Microfractures, induced by drilling or otherwise, are not detected, but microfractured rocks are detectable.     

Quantitative assessment on basin-scale hydrological services of wetlands

Despite recognizing the importance of hydrological function of wetlands, basin-scale wetlands services have rarely been investigated. The PHYSITEL/HYDROTEL modelling platform was used to quantitatively assess the impact of wetlands on quickflow and baseflow with paired simulation scenarios in Duobukuli River Basin, namely with wetlands and without wetlands.Simulation results showed that wetlands exert significant impact on basin hydrological processes by decreasing streamflow and altering streamflow regime(magnitude, frequency, duration and time of flow events). The intensity(significant or not) of wetlands influences on quickflow had daily, monthly and annual variation. Wetlands significantly attenuated quickflow during flood season while slightly support daily, monthly and annual baseflow. The average quickflow attenuation and baseflow support of wetlands were 5.89% and 0.83%, respectively. Although the intensity and effect(mitigation or augment) of wetlands on streamflow temporally varied at daily, monthly, seasonal and annual scales, wetland overall mitigated quickflow and augment baseflow in Duobukuli River Basin. Our results could provide insights for future decision-making for rehabilitation and conservation of wetlands as well as integrated basin water resources management.     

Source characterisation by mixing long-running tsunami wave numerical simulations and historical observations within a metamodel-aided ABC setting

Uncertainty related to the source parameters of earthquake can largely impact the tsunami-induced wave characteristics, especially in the case of near-field tsunami source. The combination of numerical simulations and historical eyewitness accounts can be used to better constrain those uncertainties. In the present study, we propose a Bayesian procedure to infer (i.e. learn) the probability distribution of the source parameters of the earthquake. The strategy is based on the combination of: (1) kriging-based metamodelling techniques to overcome the high computation time cost of the numerical simulator; and (2) Approximate Bayesian Computation (ABC) procedure to perform the Bayesian inference. The procedure is applied to the Ligurian (North West of Italy) 1887 tsunami case, for which tsunami-induced sea surface elevations at the coast have been reported at four locations, namely Marseille, Imperia, Diano-Marina and Genoa. The kriging metamodels are trained using only 300 long-running numerical simulations that were performed using the FUNWAVE-TVD code. Contrary to recent inversion exercises that can benefit from current modern observation networks (like tide gauges, sea bottom pressure gauges, GPS-mounted buoys), the case of historical tsunami like Liguria is complicated by the imprecision and scarcity of the observations: this is accounted for by conducting the combined ABC-kriging procedure a large number of times (i.e. 1000); each time a new set of observations being randomly generated to account for this observational error. The combined analysis of the inference results and of the observation uncertainty reveals that: (1) the coseismic slip is the most important source parameter with a very peaky density distribution around low values ranging from 0.3 to 0.6 m; (2) The fault width has a peaky density distribution around low values ranging from 10 to 12 km; (3) The rake and azimuth distribution only slightly deviate from the uniform prior, hence indicating a low influence of those parameters; (4) The bi-modal distribution of the dip is also evidenced.     

Apport des marqueurs isotopiques et biogéochimiques dans la reconstitution du paléoenvironnement de la grotte du Lazaret (Nice,Alpes-Maritimes) au cours du Pléistocène supérieur (stade isotopique 5)

The isotopic composition of calcite from the stalagmitic floor E of the Lazaret Cave is interpreted as proxy of atmospheric circulation and vegetal cover changes during IOS 5. The ${\delta }^{18}\mathrm{O}$ variations could indicate change in precipitation sources, which could originate from the Mediterranean Sea during warm periods and from the Atlantic Ocean during colder periods. The ${\delta }^{13}\mathrm{C}$ variations could be related to vegetal cover and soil type. Tree cover appears to be dominant according to pollen spectra, and organic molecules trapped into calcite (sterols, terpenoids, humic acids). To cite this article: L. Rousseau et al., C. R. Geoscience 337 (2005).     

Estimating Sensible and Latent Heat Fluxes over an Inland Water Body Using Optical and Microwave Scintillometers

Boundary-Layer Meteorology - Observations of turbulent heat fluxes over inland water bodies are scarce despite being critical to adequate lake parametrization for numerical weather forecast and...     

A New Interlaboratory Characterisation of Silicon,Rare Earth Elements and Twenty‐Two Other Trace Element Concentrations in the Natural River Water Certified Reference Material SLRS‐6 (NRC‐CNRC)

The natural river water reference material SLRS‐6 (NRC‐CNRC) is the newest batch of a quality control material routinely used in many international environmental laboratories. This work presents a nine‐laboratory compilation of measurements of major and trace element concentrations and their related uncertainties, unavailable in the NRC‐CNRC certificate (B, Cs, Li, Ga, Ge, Hf, Nb, P, Rb, Rh, Re, S, Sc, Se, Si, Sn, Th, Ti, Tl, W, Y, Y, Zr and REEs). Measurements were mostly made using inductively coupled plasma‐mass spectrometry. The results are compared with equivalent data for the last batch of the material, SLRS‐5, measured simultaneously with SLRS‐6 in this study. In general, very low concentrations, close to the quantification limits, were found in the new batch. The Sr isotopic ratio is also reported.