Protracted oogenesis and annual reproductive periodicity in the deep‐sea pennatulacean Halipteris finmarchica (Anthozoa,Octocorallia)

Halipteris finmarchica is one of the most common species of deep‐sea pennatulacean corals in the Northwest Atlantic; it was recently determined to act as a biogenic substrate for other species and as a nursery for fish larvae. Its reproductive cycle was investigated in colonies sampled in 2006 and 2007 along the continental slope of Newfoundland and Labrador (Canada). Halipteris finmarchica exhibits large oocytes (maximum diameter of 1000 μm), which are consistent with lecithotrophic larval development. Female potential fecundity based on mature oocytes just before spawning was ~6 oocytes · polyp^?1 (500–6300 oocytes · colony^?1); male potential fecundity was 16 spermatocysts · polyp^?1 (5500–57,400 spermatocysts · colony^?1). Based on statistical analysis of size‐probability frequency distributions, males harboured one cohort of spermatocysts that matured inside 8–11 months, whereas females harboured two distinct cohorts of oocytes; a persistent pool of small ones (≤400 μm) and a small number (~20%) of larger ones that grew from ~400 to >800 μm over a year. Despite this difference in the tempo of oogenesis and spermatogenesis, a synchronic annual spawning was detected. A latitudinal shift in the spawning period occurred from south (April in the Laurentian Channel) to north (May in Grand Banks and July–August in Labrador/Lower Arctic), following the development of the phytoplankton bloom (i.e. sinking of phytodetritus). Prolonged oogenesis with the simultaneous presence of different oocyte classes in a given polyp is likely not uncommon in deep‐sea octocorals and could hamper the detection of annual/seasonal reproduction when sample sizes are low and/or time series discontinued or brief.     

The activity coefficients of Fe(III) hydroxide complexes in NaCl and NaClO4 solutions

The osmotic coefficients of FeCl₃ at 25 °C from 0.15 to 1.7 m [Rumyantsev et al., Z. Phys. Chem., 218, 1089-1127, 2004] have been used to determine the Pitzer parameters (β⁽⁰⁾, β⁽¹⁾ and C^?) for FeCl₃. Since the differences in the Pitzer coefficients of rare earths in NaCl and NaClO₄ are small, the values of Fe(ClO₄)₃ have been estimated using the differences between La(ClO₄)₃ and LaCl₃. The Pitzer coefficients for FeCl₃ combined with enthalpy and heat capacity data for the rare earths can be used to estimate the activity coefficients of Fe³⁺ in NaCl over a wide range of temperatures (0 to 50 °C) and ionic strength (0 to 6 m).The activity coefficients of Fe³⁺ in NaCl and NaClO₄ solutions have been used to determine the activity coefficients of Fe(OH)²⁺ in these solutions from the measured first hydrolysis constants of Fe³⁺ [Byrne et al., Mar. Chem., 97, 34-48, 2005]. The activity coefficients of , Fe(OH)₃ and from 0 to 50 °C have also been determined from the solubility measurements of Fe(III) in NaCl solutions [Liu and Millero, Geochim. Cosmochim Acta, 63, 3487-3497, 1999]. These activity coefficients have been fitted to the Pitzer equations. These results can be used to estimate the speciation of Fe(III) with OH⁻ in natural waters with high concentrations of NaCl from 0 to 50 °C.     

Plio-Pleistocene mammals from Mille-Logya,Ethiopia, and the post-Hadar faunal change

We describe the non-primate mammalian fauna from the late Pliocene to earliest Pleistocene deposits of Mille-Logya in the Lower Awash Valley, Ethiopia, dated to c. 2.9–2.4 Ma, and divided into three successive units: Gafura, Seraitu, and Uraitele. We identify 41 mammalian taxa (including rodents), the most diverse group being the Bovidae, with 17 taxa. While the Gafura assemblage still resembles those from the earlier Hadar Formation, the younger Seraitu assemblage documents a major turnover. While there is little change in the species present across this interval, the relative abundances of various taxa change dramatically, with suids being largely replaced by open-country bovids (Alcelaphini and Antilopini). We interpret this faunal change as reflective of an environmental shift, contemporaneous with the replacement of Australopithecus afarensis by Homo in the area.     

Micro-fracture instabilities in granular solids

We study the aspect of unstable behavior (like strain localization bands) in elastic solids as a consequence of micro-fracturing. A two-scale approach of computational homogenization is considered. The macroscopic behavior is investigated by finite element computations on a unit cell. At the micro-level, we consider a granular structure with elastic grains. The inter-granular boundaries are modeled with cohesive laws, friction and unilateral contact. We show that decohesion between grains gives rise to macro-instabilities, indicated by the loss of ellipticity, typical for deformation localization bands. The relation between the microscopic softening on inter-granular boundaries and the onset of macro-instabilities is studied through numerical examples. The influence of the cohesive law and friction parameters is analyzed. For periodic distributions of granular structures, we prove the loss of periodicity by failure and the corresponding size dependence effect in the homogenized response. We present numerical examples of bifurcation of solutions for granular cell structures and of particular solutions specific to elementary volumes with periodic cell distribution. Size dependence appears in the unstable regime and is strongly influenced by cohesion and friction parameters.     

Finding Optimal Travel Routes with Uncertain Cost Data

Geospatial data analysis techniques are widely used to find optimal routes from specified starting points to specified destinations. Optimality is defined in terms of minimizing some impedance value over the length of the route – the value to be minimized might be distance, travel time, financial cost, or any other metric. Conventional analysis procedures assume that impedance values of all possible travel routes are known a priori, and when this assumption holds, efficient solution strategies exist that allow truly optimal solutions to be found for even very large problems. When impedance values are not known with certainty a priori, exact solution strategies do not exist and heuristics must be employed. This study evaluated how the quality of the solutions generated by one such heuristic were impacted by the nature of the uncertainty in the cost database, the nature of the costs themselves, and the parameters used in the heuristic algorithm. It was found that all of these factors influenced the qualities of the solutions produced by the heuristic, but encouragingly, an easily controlled parameter of the heuristic algorithm itself played the most important role in controlling solution quality.     

A search for evidence of critical internal wave reflection on the continental rise and slope off Nova Scotia

Abstract

According to linear inviscid theory, the reflection of internal waves off a uniformly sloping bottom should lead to greatly enhanced energy density, and a cross‐isobath alignment of motions, near the critical frequency ω_c for which the wave ray slope equals the bottom slope. Current‐meter data from the continental rise and slope off Nova Scotia are used to test this hypothesis. Near‐bottom energy enhancement at ω_c was found to be significant at the 95% level for 8 out of 30 tests performed, whereas cross‐isobath alignment of motions near ω_c was significant at the 95% level for 10 out of 15 tests performed. Some aspects of the observations that appear to be consistent with non‐linear reflection theory are briefly discussed.     

郯庐断裂带(安徽段)及邻区的动力学分析与区域构造演化

依据区域构造层次划分,采用构造筛分法,层层深入,层层筛分,确定发生于各个不同时代地层/岩层内的断裂活动的同期及叠加的应力场特征。综合所有的同期应力场特征及辅以叠加的应力场特征来验证,从而确定了一个连续的、完整的断裂活动的应力场演化序列;结合区域构造变形特征分析,阐明郯庐断裂带(安徽段)的构造演化。应力场分析显示:晚三叠-早侏罗世应力场为北北西—南南东或近南北向挤压,属古特提斯构造域,断裂发生同造山走滑;早白垩世早期,应力场为北西—南东向挤压,断裂发生左行走滑运动,中国东部处于西环太平洋构造域;早白垩世晚期—古新世(始新世),区域发生北西—南东向伸展作用,断裂处于伸展断陷作用阶段;新生代,受区域上近东西向的挤压作用影响,断裂发生挤压逆冲兼右行走滑作用。     

StalAge – An algorithm designed for construction of speleothem age models

Here we present a new algorithm (StalAge), which is designed to construct speleothem age models. The algorithm uses U-series ages and their corresponding age uncertainty for modelling and also includes stratigraphic information in order to further constrain and improve the age model. StalAge is applicable to problematic datasets that include outliers, age inversions, hiatuses and large changes in growth rate. Manual selection of potentially inaccurate ages prior to application is not required. StalAge can be applied by the general, non-expert user and has no adjustable free parameters. This offers the highest degree of reproducibility and comparability of speleothem records from different studies. StalAge consists of three major steps. Firstly, major outliers are identified. Secondly, age data are screened for minor outliers and age inversions, and the uncertainty of potential outliers is increased using an iterative procedure. Finally, the age model and corresponding 95%-confidence limits are calculated by a Monte-Carlo simulation fitting ensembles of straight lines to sub-sets of the age data.We apply StalAge to a synthetic stalagmite ’sample’ including several problematic features in order to test its performance and robustness. The true age is mostly within the 95%-confidence age limits of StalAge showing that the calculated age models are accurate even for very difficult samples. We also apply StalAge to three published speleothem datasets. One of those is annually laminated, and the lamina counting chronology agrees with the age model calculated by StalAge. For the other two speleothems the resulting age models are similar to the published age models, which are both based on smoothing splines. Calculated uncertainties are in the range of those calculated by combined application of Bayesian chronological ordering and a spline, showing that StalAge is efficient in using stratigraphic information in order to reduce age model uncertainty.The algorithm is written in the open source statistical software R and available from the authors or as an electronic supplement of this paper.