Discriminating characters of ore-forming intrusions in the super-large Chalukou porphyry Mo deposit,NE China

The Chalukou porphyry Mo deposit, located in the Great Hinggan Range, is the largest Mo deposit in northeast China, although the age and genesis of the associated magmatic intrusions remain debated.Here we report zircon U-Pb ages and trace elements, whole rock geochemistry and Sre Nd isotope data with a view to understand the relationship between the magmatism and molybdenum mineralization.Zircon U-Pb analysis yield an age of 475 Ma for rhyolite in the older strata, 168 Ma for the premineralization monzogranite, and 154 Ma for the syn-mineralization granite porphyry. The granite porphyry and quartz porphyry are considered as the ore-forming intrusions. These rocks are peraluminous, alkali-calcic, and belong to high-K to shoshonitic series with a strong depletion of Eu. They also display characteristics of I-type granites. The rocks exhibit wide variations of(87 Sr/86 Sr)iin the range of 0.705426 -0.707363, and ε_(Nd)(t) of -3.7 to 0.93. Zircon REE distribution patterns show characteristics between crust and the mantle, implying magma genesis through crust-mantle interaction. The Fe_2O_3/FeO values(average 1) for the whole rock and EuN/Eu*Nvalues(average 0.45), Ce~(4+)/Ce~(3+) values(average 301)for zircon grains from the granite porphyry are higher than those from other lithologies. These features suggest that the ore-forming intrusions(syn-mineralization porphyry) had higher oxygen fugacity conditions than those of the pre-mineralization and post-mineralization rocks. The Chalukou Mo deposit formed in relation to the southward subduction of the Mongol-Okhotsk Ocean. Our study suggests that the subduction-related setting, crust-mantle interaction, and the large-scale magmatic intrusion were favorable factors to generate the super-large Mo deposits in this area.     

Water source partitioning among trees growing on carbonate rock in a subtropical region of Guangxi, China

It is not clear how the water sources are used by trees in typical karst areas of Guangxi, China. Trees growing on rigid carbonate rock can primarily use spring water, precipitation-recharged soil water or a mixture of the two. In this study, the Nongla karst dynamic monitoring station in the southwest of Guangxi, China, was observed. To determine the water sources accessed by trees growing on rigid carbonate rock, seasonal change of isotope ratios (δ¹⁸O and δ D) in twig sap, soil water, rainfall and spring water were measured. Stem water samples plotted to the right of the meteoric water line indicates utilization of water sources subject to evaporative isotopic enrichment. Trees growing on rigid carbonate rock in the southwest of China used rainfall directly in the rainy season. Adult trees tended to use deeper water stored in the epikarst zone, while the young ones used soil water when precipitation decreased. In the dry season, all trees sampled depend mostly on water stored in the epikarst zone. Spring water was the major water source for all of the tree species investigated in the dry season. In conclusion, these data indicate that trees growing on rigid carbonate rock in southwest China depend mostly on water stored in the epikarst zone. Therefore, water storage in the epikarst zone is the essential water source for trees growing on carbonate rock in southwest China.     

Hydrogeochemical effects of secondary forest in Guangxi Nongla karst areas in China

Rainfall, throughfall, stemflow and spring were studied in a secondary forest during a wet season from April to August in 2006. Some of the chemicals in throughfall, stemflow and spring were increased in contrast with incident rainfall. Specifically, Cl⁻, HCO₃ ⁻, Na⁺ and Ca²⁺ were leached negatively in throughfall, but K⁺ and Mg²⁺ were leached positively. In stemflow, Cl⁻ and Na⁺ were leached negatively, the others were leached positively and their concentrations were higher than those in throughfall. Total carbon, organic carbon and inorganic carbon in throughfall and stemflow were increased as rainfall went through the secondary forest. The concentration of free CO₂ in rainfall was lower than both, throughfall and stemflow; the relationship between total acidity and free CO₂ was linear. pH of throughfall and stemflow , such as maximum, minimum and mean, were lower than that of rainfall and the extent of pH in spring was changed minimally. We came to a conclusion that rainfall via the secondary forest can lead to further erosion, accelerate the biogeochemical cycle in epikarst zone, enhance the effective state of alkali elements in the soil, supply vegetation with more nutrients and advance vegetation’s growth and succession, which are reasonably sufficient to form a stable karst ecosystem.     

Microstructure characteristics and forming environment of late Quaternary Period loess in the Loess Plateau of China

Since the late Quaternary Period, the rapid rising of the northeastern Qinghai-Tibetan Plateau has greatly changed the East Asian climate and formed different regional monsoon climates. Various microstructures of the loess in northern China have formed under a variety of climatic conditions. The scanning electron microscope (SEM) and energy spectrum analysis are used in this paper to study the relationship between the indexes of loess microstructures and the forming climates, and the indexes include the diameter of sand grains, Ca/Fe value and the characteristic shapes of the loess from SEM microstructures pictures. In terms of their respective climatic circumstances, the major microstructures of regional loess may be classified into nine categories according to their forms and particle sizes, such as loess formed in near-sand source, loess of granule sand dropping, and loess formed in hot and rainy places, i.e. with the loess SEM pictures, climates of about 15 ka b.p. in different places may be evaluated. In conclusion, the clear and distinguishable loess microstructures and their indexes in the Loess Plateau of China can also deduce the evolution of climate, such as warm or cold and wet or dry, and even sandstorm activities when the loess is deposited.     

中亚地区阿姆河盆地查尔朱、布哈拉阶地构造特征及演化

阿姆河盆地是中亚地区重要的含油气盆地,位于阿姆河北岸的查尔朱阶地和布哈拉阶地为盆地的二级构造单元,其油气资源量占全盆地的一半。油气主要富集于阶地的局部背斜构造和生物礁圈闭中,这些圈闭与该区构造形成演化密不可分。利用常规地质资料,通过精细地层对比和地震资料解释,识别出两个关键界面:侏罗纪末的断拗转换面和早第三纪末的区域角度不整合面,并结合板块构造理论确定了构造变形时期。研究认为,侏罗纪以来两阶地经历了侏罗纪—白垩纪断陷—拗陷期和早第三纪抬升—改造期两个重要演化阶段,形成了上、中、下三大构造层。断陷—拗陷阶段的沉积控制了该区的构造格局;中构造层膏盐层的发育丰富了后期的构造样式。早第三纪—晚第三纪的构造运动使该区构造发生了强烈变革,形成了典型的逆断裂、走滑断裂带和不对称复合背斜构造带。     

Mesozoic tectonic evolution of the Southeast China Block: New insights from basin analysis

In order to better understand the Mesozoic tectonic evolution of Southeast China Block (SECB in short), this paper describes geological features of Mesozoic basins that are widely distributed in the SECB. The analyzed data are derived from a regional geological investigation on various Mesozoic basins and a recently compiled 1:1,500,000 geological map of Mesozoic–Cenozoic basins. Two types of basin are distinguished according to their tectonic settings, namely, the post-orogenic basin (Type I) and the intracontinental extensional basin (Type II); the latter includes the graben and the half-graben or faulted-depression basins. Our studies suggest that the formation of these basins connects with the evolution of geotectonics of the SECB. The post-orogenic basin (Type I) was formed in areas from the piedmont to the intraland during the interval from Late Triassic to Early Jurassic; and the formation of the intracontinental extensional basin (Type II) connects with an intracontinental crustal thinning setting in the Late Mesozoic. The graben basin was generated during the Middle Jurassic and is associated with a bimodal volcanic eruption; and the half-graben or faulted-depression basin, filled mainly by the rhyolite, tuff and sedimentary rocks during Early Cretaceous, is occupied by the Late Cretaceous–Paleogene red-colored terrestrial clastic rocks. We noticed that the modern outcrops of numerous granites and basins occur in a similar level, and the Mesozoic granitic bodies contact with the adjacent basins by large normal faults, suggesting that the modern landforms between granites and basins were yielded by the late crustal movement. The modern basin and range framework was settled down in the Cretaceous. Abundant sedimentary structures are found in the various basins, from that the deposited environments and paleo-currents are concluded; during the Late Triassic–Early Jurassic time, the source areas were situated to the north and northeast sides of the outcrop region. In this paper, we present the study results on one geological and geographical separating unit and two separating fault zones. The Wuyi orogenic belt is a Late Mesozoic paleo-geographically separating unit, the Ganjiang fault zone behaves as the western boundary of Early Cretaceous volcanic rocks, and the Zhenghe–Dapu fault zone separates the SE-China Coastal Late Mesozoic volcanic-sedimentary basins and the Wuyi orogenic belt. Finally, we discuss the geodynamic mechanisms forming various basins, proposing a three-stage model of the Mesozoic sedimentary evolution.     

Response to Dersarkissian's comments on the structure of the Universe

We found that the structure of the Universe can be characterized by a set of actions ^s . This means that some discontinuous phenomena in the Universe can be considered as large-scale quantum effects. The behaviour of matter on a typical scale is determined by the behaviour of matter on other scales through the interactions.     

Coupling winds to ocean surface currents over the global ocean

A Wind stress–Current Coupled System (WCCS) consisting of the HYbrid Coordinate Ocean Model (HYCOM) and an improved wind stress algorithm based on Donelan et al. [Donelan, W.M., Drennan, Katsaros, K.B., 1997. The air–sea momentum flux in mixed wind sea and swell conditions. J. Phys. Oceanogr. 27, 2087–2099] is developed by using the Earth System Modeling Framework (ESMF). The WCCS is applied to the global ocean to study the interactions between the wind stress and the ocean surface currents. In this study, the ocean surface current velocity is taken into consideration in the wind stress calculation and air–sea heat flux calculation. The wind stress that contains the effect of ocean surface current velocity will be used to force the HYCOM. The results indicate that the ocean surface velocity exerts an important influence on the wind stress, which, in turn, significantly affects the global ocean surface currents, air–sea heat fluxes, and the thickness of ocean surface boundary layer. Comparison with the TOGA TAO buoy data, the sea surface temperature from the wind–current coupled simulation showed noticeable improvement over the stand-alone HYCOM simulation.