Average winter temperatures at De Bilt (the Netherlands): 1634–1977

A very long series of average winter temperatures in the Netherlands is presented. The series is based on direct observations (1735–1977) and administrative data concerning Dutch canals (1634–1734). The sources and the reliability of the data are discussed. Some characteristics of the series are shown.     

川东地区天然气勘探开发的三种模式

本文根据川东地区天然气勘探开发历史,系统归纳和总结了成组气田整体勘探开发、多高点滚动勘探开发和多产层立体勘探开发三种模式的勘探程序、勘探部署以及开发特点和原则。以供后续天然气勘探开发决策时参考。     

DEPAQ分光光度法测定茶叶中微量锰

本研究了５－（４－二乙氨基苯偶氮）－８－羟基喹啉（ＤＥＰＡＱ）与锰（Ⅱ）的显色反应，在斐了子型面表面活性剂ＴｒｉｔｏｎＸ－１００存在下，ｐＨ８．５的缓冲介质中，锰（Ⅱ）与ＤＥＰＡＱ形成１：２的红色配合物，最大吸收波长为５３０ｎｍ，表现摩尔吸光系数ε＝７．３×１０＾４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，锰量在０～２０μｇ／２５ｍＬ范围符合比尔定律，试验了常见阴阳离子的干扰情况，本法用于茶叶微量锰的测定，     

Geochemical constraints of the eclogite and granulite facies metamorphism as recognized in the Raobazhai complex from North Dabie Shan,China

A combined study of major and trace elements, fluid inclusions and oxygen isotopes has been carried out on garnet pyroxenite from the Raobazhai complex in the North Dabie Terrane (NDT). Well‐preserved compositional zoning with Na decreasing and Ca and Mg increasing from the core to rim of pyroxene in the garnet pyroxenite indicates eclogite facies metamorphism at the peak metamorphic stage and subsequent granulite facies metamorphism during uplift. A P–T path with substantial heating (from c. 750 to 900 °C) after the maximum pressure reveals a different uplift history compared with most other eclogites in the South Dabie Terrane (SDT). Fluid inclusion data can be correlated with the metamorphic grade: the fluid regime during the peak metamorphism (eclogite facies) was dominated by N₂‐bearing NaCl‐rich solutions, whereas it changed into CO₂‐dominated fluids during the granulite facies retrograde metamorphism. At a late retrograde metamorphic stage, probably after amphibolite facies metamorphism, some external low‐salinity fluids were involved. In situ UV‐laser oxygen isotope analysis was undertaken on a 7 mm garnet, and impure pyroxene, amphibole and plagioclase. The nearly homogeneous oxygen isotopic composition (δ¹⁸O_VSMOW = c. 6.7‰) in the garnet porphyroblast indicates closed fluid system conditions during garnet growth. However, isotopic fractionations between retrograde phases (amphibole and plagioclase) and garnet show an oxygen isotopic disequilibrium, indicating retrograde fluid–rock interactions. Unusual MORB‐like rare earth element (REE) patterns for whole rock of the garnet pyroxenite contrast with most ultra‐high‐pressure (UHP) eclogites in the Dabie‐Sulu area. However, the age‐corrected initial ε_Nd(t) is ? 2.9, which indicates that the protolith of the garnet pyroxenite was derived from an enriched mantle rather than from a MORB source. Combined with the present data of oxygen isotopic compositions and the characteristic N₂ content in the fluid inclusions, we suggest that the protolith of the garnet pyroxenite from Raobazhai formed in an enriched mantle fragment, which has been exposed to the surface prior to the Triassic metamorphism.     

Zoned finite strip method and its applications in geomechanics

The technique of Finite Strip method has been extended for zoned strips. One strip can have several different materials in horizontal direction including dummy materials. The new developed zoned Finite Strip (Z.F.S.) method has many engineering applications, particularly in geomechanical problems. The formulation is presented and three different geotechnical problems have been solved using the new Z.F.S. method, which could not be solved by the original Finite Strip method. The results are compared with the solution for the same problems obtained by analytical and/or numerical (Finite Element) methods. The reduced input and output for the Z.F.S. method compared to the Finite Element method makes this method attractive particularly for practising engineers. However the results can be as good as the well known Finite Element method.     

Observations of beam propagation

We discuss the observational evidence for propagating electron distributions in the solar corona as obtained from type III observations. The location of the beam acceleration region together with the effects of the ambient medium on beam propagation are discussed in the framework of recent observational and theoretical developments. The results of combined X-ray and radio observations obtained during and after the Solar Maximum Year are summarized. Special attention is paid to the effect of the small-scale structure of the corona on the observed radio emission. We outline various desirable developments which are necessary to improve the understanding of the behaviour of charged particle beams in magnetized plasmas.     

Ambient biogenic hydrocarbons and isoprene emissions from a mixed deciduous forest

Experiments were conducted during the growing season of 1993 at a mixed deciduous forest in southern Ontario, Canada to investigate the atmospheric abundance of hydrocarbons from phytogenic origins, and to measure emission rates from foliage of deciduous trees. The most abundant phytogenic chemical species found in the ambient air were isoprene and the monoterpenes -pinene and -pinene. Prior to leaf-bud break during spring, ambient hydrocarbon mixing ratios above the forest remained barely above instrument detection limit (20 parts per trillion), but they became abundant during the latter part of the growing season. Peak isoprene mixing ratios reached nearly 10 parts per billion (ppbv) during mid-growing season while maximum monoterpene mixing ratios were close to 2 ppbv. Both isoprene and monoterpene mixing ratios exhibited marked diurnal variations. Typical isoprene mixing ratios were highest during mid-afternoon and were lowest during nighttime. Peak isoprene mixing ratios coincided with maximum canopy temperature. The diurnal pattern of ambient isoprene mixing ratio was closely linked to the local emissions from foliage. Isoprene emission rates from foliage were measured by enclosing branches of trees inside environment-controlled cuvette systems and measuring the gas mixing ratio difference between cuvette inlet and outlet airstream. Isoprene emissions depended on tree species, foliage ontogeny, and environmental factors such as foliage temperature and intercepted photosynthetically active radiation (PAR). For instance, young (<1 month old) aspen leaves released approximately 80 times less isoprene than mature (>3 months old) leaves. During the latter part of the growing season the amount of carbon released back to the atmosphere as isoprene by big-tooth and trembling aspen leaves accounted for approximately 2% of the photosynthetically fixed carbon. Significant isoprene mixing ratio gradients existed between the forest crown and at twice canopy height above the ground. The gradient diffusion approach coupled with similarity theory was used to estimate canopy isoprene flux densities. These canopy fluxes compared favorably with values obtained from a multilayered canopy model that utilized locally measured plant microclimate, biomass distribution and leaf isoprene emission rate data. Modeled isoprene fluxes were approximately 30% higher compared to measured fluxes. Further comparisons between measured and modeled canopy biogenic hydrocarbon flux densities are required to assess uncertainties in modeling systems that provide inventories of biogenic hydrocarbons.     

Determination of copper complexation with natural organic ligands in seawater by equilibration with MnO2 I. Theory

The theory is discussed which describes the distribution of copper ions between a weak ion exchanger, as exemplified by MnO₂, and natural organic complexing material in seawater. Application of this theory and experimental procedures are outlined in part II of this series. It is apparent from the theory that titration with Cu²⁺ of one or more organic complexing ligands can be graphically represented by straight lines; slope and y-axis intercept provide information on the conditional stability constants and the ligand concentrations. Model calculations show that measurement of metal complexation at ligand concentrations higher than normally present in seawater may produce erroneous results because of possible changes in the metal to ligand ratio in the complexes. It is therefore advisable to measure metal complexation in the original, unaltered, water sample.     

Determination of copper complexation with natural organic ligands in seawater by equilibration with MnO2 II. Experimental procedures and application to surface seawater

The MnO₂ adsorption method combined with voltammetry is proposed for the direct determination of metal complexation in seawater of various salinities as a more satisfactory alternative to direct voltammetric measurements and bioassay methods. A small quantity of MnO₂ is equilibrated with copper ions in filtered seawater. Natural organic ligands in the seawater compete for copper with the MnO₂. Total dissolved copper is measured by differential pulse anodic stripping voltammetry after filtration and acidification of the sample. Preconcentration of natural water samples is unnecessary and measurement is performed at the natural equilibrium pH of the aerated sample. The analytical limit of detection of the method depends on contamination from the filtration step, and for copper complexation a ligand concentration of 5 × 10^?8 M was obtained. The sensitivity can be increased by use of radioisotopes as tracers. The method is very versatile in that complexation of various metals may be determined by any analytical method that measures total dissolved metal concentrations. Neither organic ligands nor their complexes with copper adsorb on the MnO₂ at pH8, but at pH 1.8 MnO₂ is an efficient scavenger for electroactive organic material.Samples of surface water from the Irish Sea and the Atlantic Ocean were found to contain ligand concentrations of 1.7 × 10^?7 and 1.1 × 10^?7 M, with conditional stability constants (log values) of 9.84 ± 0.13 and 9.86 ± 0.23, respectively, at pH 8.0.