On the Problem of Differential Payment for the Use of Different-Quality Surface Waters in Ukraine

The evolution of views and practical decisions regarding the problem of collecting payment for the use of surface waters with regard to their quality in the former USSR and present-day Ukraine is discussed. A simple and feasible method is proposed for differentitation of regional (basin) rates of payment for the use of surface water in Ukraine with allowance made for its quality assessed based on a system of environmental classifications.     

Extraction and recovery of precious metals from electronic waste printed circuit boards by bioleaching acidophilic fungi

Printed circuit boards contain precious metals. They are produced in large volumes, rendering them an important component of the electronic waste. In view of the heterogeneity of the metals present, reprocessing of electronic waste is a heinous task. The present study focused on leaching of valuable metals from electronic waste printed circuit boards using Aspergillus niger DDNS1. The adaptation phases began at 0.1, 0.5 and 1.0% of fine powder of printed circuit boards with 10% inoculum and were optimized with three effective factors, viz. initial pH, particle size and pulp density, to achieve the maximum simultaneous recovery of the valuable metals. The interactions of these metals were also deciphered using scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform infrared spectrum and atomic absorption spectroscopy. The results indicated that extraction of the precious metals was accomplished mainly through the unique organic acids originating from A. niger DDNS1. The initial pH played an important role in the extraction of the precious metals and the metals precipitate formation. The leaching rate of the metals was generally higher at low powder dosage of printed circuit boards. The toxicity of the printed circuit boards had little effect on two-step bioleaching at the pulp density of 0.1% compared to one-step bioleaching. The two-step bioleaching process was followed under organic acid-forming conditions for the maximum mobilization of metals. Thus, the precious metals from printed circuit boards could be mobilized through fungal bioleaching which promises an important industrial application in recycling of electronic wastes.     

Réflexions sur la contingence des lois de la Nature

There are two fundamental conceptions concerning the laws of nature — these laws are eternal or they may vary in the course of time. We suggest an experiment in order to find an intermediary thesis — i.e. to discover that law, if it really exists, according to which a given law of nature varies, or, at least, to find out the direction in which this variation is performed.     

A Spectrophotometric Study of the Be Star HD 164447

Spectra of the Be star HD 164447 have been studied. The equivalent widths and the intensities of the measured lines are given. No emission is apparent on the plates. Applying the thin layer theory some parameters of the stars atmosphere were derived.     

Measures of Parameter Uncertainty in Geostatistical Estimation and Geostatistical Optimal Design

Studies of site exploration, data assimilation, or geostatistical inversion measure parameter uncertainty in order to assess the optimality of a suggested scheme. This study reviews and discusses measures for parameter uncertainty in spatial estimation. Most measures originate from alphabetic criteria in optimal design and were transferred to geostatistical estimation. Further rather intuitive measures can be found in the geostatistical literature, and some new measures will be suggested in this study. It is shown how these measures relate to the optimality alphabet and to relative entropy. Issues of physical and statistical significance are addressed whenever they arise. Computational feasibility and efficient ways to evaluate the above measures are discussed in this paper, and an illustrative synthetic case study is provided. A major conclusion is that the mean estimation variance and the averaged conditional integral scale are a powerful duo for characterizing conditional parameter uncertainty, with direct correspondence to the well-understood optimality alphabet. This study is based on cokriging generalized to uncertain mean and trends because it is the most general representative of linear spatial estimation within the Bayesian framework. Generalization to kriging and quasi-linear schemes is straightforward. Options for application to non-Gaussian and non-linear problems are discussed.     

Directional dependence of P- and S-wave propagation and polarization in foliated rocks from the Kola superdeep well: Evidence from laboratory measurements and calculations based on TOF neutron diffraction

We have measured P- and S-wave velocities on two amphibolite and two gneiss samples from the Kola superdeep borehole as a function of pressure (up to 600 MPa) and temperature (up to 600 °C). The velocity measurements include compressional (Vp) and shear wave velocities (Vs1, Vs2) propagating in three orthogonal directions which were in general not parallel to inherent rock symmetry axes or planes. The measurements are accompanied by 3D-velocities calculations based on lattice preferred orientation (LPO) obtained by TOF (Time Of Flight) neutron diffraction analysis which allows the investigation of bulk volumes up to several cubic centimetres due to the high penetration depth of neutrons. The LPO-based numerical velocity calculations give important information on the different contribution of the various rock-forming minerals to bulk elastic anisotropy and on the relations of seismic anisotropy, shear wave splitting, and shear wave polarization to the structural reference frame (foliation and lineation). Comparison with measured velocities obtained for the three propagation directions that were not in accordance with the structural frame of the rocks (foliation and lineation) demonstrate that for shear waves propagating through anisotropic rocks the vibration directions are as important as the propagation directions. The study demonstrates that proper measurement of shear wave splitting by means of two orthogonal polarized sending and receiving shear wave transducers is only possible when their propagation and polarization directions are parallel and normal to foliation and lineation, respectively.     

High-precision repeat-groundtrack orbit design and maintenance for Earth observation missions

The focus of this paper is the design and station keeping of repeat-groundtrack orbits for Sun-synchronous satellites. A method to compute the semimajor axis of the orbit is presented together with a station-keeping strategy to compensate for the perturbation due to the atmospheric drag. The results show that the nodal period converges gradually with the increase of the order used in the zonal perturbations up to \(J_{15}\). A differential correction algorithm is performed to obtain the nominal semimajor axis of the reference orbit from the inputs of the desired nodal period, eccentricity, inclination and argument of perigee. To keep the satellite in the proximity of the repeat-groundtrack condition, a practical orbit maintenance strategy is proposed in the presence of errors in the orbital measurements and control, as well as in the estimation of the semimajor axis decay rate. The performance of the maintenance strategy is assessed via the Monte Carlo simulation and the validation in a high fidelity model. Numerical simulations substantiate the validity of proposed mean-elements-based orbit maintenance strategy for repeat-groundtrack orbits.     

Formation Mechanism of Mud Bank Along the Southwest Coast of India

Mud bank formation during the southwest monsoon along the southwest coast of India remains an enigma to the researchers and coastal community in spite of several earlier studies. The present study attempts to unravel the mystery through a high-frequency, season-long time-series observation at Alappuzha, located at the southern part of the west coast of India, a region of frequent occurrence of mud bank. Using 7-month-long weekly time-series observation, we identified strong winds and high waves associated with onset of the southwest monsoon and subsequent three episodic atmospheric low-pressure events (LPEs).With the help of in situ time-series data, we show that the strong winds and high waves associated with southwest monsoon pre-conditions the near shore bottom sediment to bring it into suspension. The high amplitude waves associated with the southwest monsoon, while propagating from the deep water to shallow water region, interact with the bottom initiating bottom-sediment movement and its suspension due to wave refraction and shoaling. The sporadic occurrence of the atmospheric LPEs enhances the process of suspension of bottom sediment in the near shore region leading to the formation of fluid mud. Simulations with a cohesive sediment transport model yielded realistic estimates of sediment transport, in the presence of an onshore current, a pre-requisite for transporting the fluid mud toward the coast. The prevailing onshore upwelling current during the southwest monsoon provides the favorable pre-requisite conditions for transporting the fluid mud through depression channel network towards the coast. Once sufficient quantity and thickness of fluid mud is accumulated in the near shore region, it acts as a wave damper for subsequent high monsoon waves, as indicated by the time-series wave data, leading to the formation of tranquil mud bank region. Depression channel networks extending from the shelf to the coast off Alappuzha, Kochi, Ponnani, Beypore, and Ullal were found in the bathymetric charts, thus explaining why mud banks occur only at few locations in spite of the prevalence of similar monsoon conditions.