Primary minerals of Zn-Pb mining and metallurgical dumps and their environmental behavior at Plombières,Belgium

The primary phases and minerals of the Plombières dumps include typical smelting furnace products such as metallic Fe, Pb, Cu, Zn, Fe-Zn alloys, carbides, phosphides, sulfides of Fe, Zn, Pb, Cu, Mn (alabandite), and FeAs. Spinels, mainly of Fe and Al, are common constituents of the primary assemblage; substitution by Zn, V, Cr, Ti, Mg, and Ca occurs. Primary phases also include the most common Zn-rich fayalite, Zn-rich Ca-Fe silicates, melilite, corundum, and apatite. Most of the Zn is incorporated in iron silicates, ZnO and ZnS. Lead occurs mainly as PbS, metallic lead, and is also present in coal residues. Cadmium is found mainly in metallic zinc and its alloys and in ZnO. The dumps also contain mining wastes composed of pyrite, melnikovite, and iron oxides produced by natural weathering of Zn-Pb ores. Melnikovite and iron oxides are rich in As, Pb, and Zn and possess an increased content of Tl. Leaching tests carried out on the surfaces of polished sections indicate that acid rain (solutions I and II) will mobilize mainly Zn and Cd and, to a much smaller extent, Pb and Sb. Leaching of metals by sulfate-chloride fluids present in the pore network of dumps (solutions III, IV, and V) depends on the pH, which in the dumps is controlled by the proportion of carbonates to sulfides. The more acid fluids leach both sulfides and silicates.     

Neogene volcanism and Holocene earthquakes in the Tanlu fault zone, eastern China

In this paper, we study the relationship between Neogene volcanism and Holocene earthquakes in the Tanlu fault, eastern China. We find that fault segments through which Neogene and Quaternary magma have extruded do not show Holocene slip because they are covered by unfaulted basalts. In contrast, fault branches that are away from the Quaternary volcanic centers display Quaternary faulting and are responsible for earthquakes as recorded both historically and geomorphologically. Therefore, magma intrusion appears to modify fault activity in two different ways: (1) within the faults, the cooling magma serves as a cohesion or barrier, welding the faults so that they become stronger in resisting slip; (2) beneath the faults, the upwelling magma promotes slip of faults above the magma body, and hence generation of earthquakes. Physically, the first case results from contraction of the cooling magma, which causes a relative increase in fault-normal stress so that the fault failure resistance is enhanced. The second case results from the upward dynamic force and the heat brought in by the magma body, both of which cause the effective fault-normal stress to decrease so that the fault failure resistance is reduced. That could explain why earthquakes occur on faults bypassing the volcanic centers as typified in the Yishu fault zone and in the regions where heat flows are relatively high as shown in the Bohai Bay area.     

煤矿采空区场地建筑适宜性工程地质研究方法

简述了煤矿采空区场地存在的工程地质问题；提出了查明采空区场地工程地质条件的现场勘察和室内模拟研究方法。并结合采空区活化特点，对采空区场地建筑适宜性作了分析；提出了地基处理和建筑物防护措施     

岩溶地下水集中开采区水质系统预测研究

在岩溶地区，地下水的超强度开采与工业“三废”及生活废弃物不合理的排放，造成了地下水较严重的污染。用动态系统方法建立的地下水污染时间序列递推预测模型，在岩溶地下水环境质量预测与管理方面都具有指导意义。     

新疆西准噶尔金矿成矿域矿床成因及矿床模式

新疆西准噶尔金矿成矿域是大区域内成矿单位，成矿域中所有金矿床（点）均产于地壳构造活动带。富含金的地幔物质沿深大断裂上升侵位，分熔，产生岩浆，火山活动，壳下重熔再熔、火山物质沉积变质作用，在漫长的华力西期经历反复多次的构造变动，形成超基性－基性火山－沉积－变质含金建造，是准噶尔－哈萨克斯坦古板块碰撞作用的产物。     

普通克里格法在矿产储量计算中的应用

普通克里格法能充分利用样品信息，有效地提高块段平均品位及矿产储量精度。以刁泉银铜矿为实例，介绍了该方法的理论和方法应用以及储量计算流程图。     

地幔流体及其成矿作用

地幔流体作为一种重要成矿介质在某些矿床形成过程中起到过重要作用。根据目前地幔流体研究的某些成果，介绍了地幔流体可能与成矿的方式和成矿机制，并举例说明地幔流体与超大型，大型矿床之间的成因联系。     

古埃磁天平法研究磁流体的磁性及稳定性

本文根据古埃磁天平的测量原理和磁流体的超顺磁性质，首次使用古埃磁天平研究了磁流体的磁性，利用磁流体的磁增重随时间的变化，研究磁流体的稳定性，并用实验证明方法的可行性。     

江苏及南黄海地区历史地震类型分布特征

通过对江苏地区及南黄海海域历史地震资料特点分析，将研究区历史地震类型分为相对安全类和相对危险类，并对地震类型的统计结果、地理分布特征及构造进行探讨. 结果表明:① 江苏及南黄海地区绝大多数中强以上历史地震类型为相对安全类，仅有13.8%的中强以上历史地震为相对危险类；② 江苏陆地、长江口以东海域和南黄海北部坳陷地区以相对安全类地震为主，苏中沿海南黄海海域地震类型分布较为复杂，相对安全类和相对危险类地震类型比例基本相当；③ 研究区历史地震类型统计结果和空间分布特征与现代地震序列类型实况非常吻合，反映本区地震活动具有继承性的特点.研究结果可以作为江苏省地震应急工作中震后早期趋势判定的参考依据.      

原位磁化X射线粉末衍射法测还原铁粉的微观磁致伸缩系数

首次报导X射线粉末衍射法测量铁粉晶胞的磁致伸缩系数。还原铁粉样品原位磁化后 ,铁立方晶胞产生磁致伸缩效应 ,晶胞参数的变化引起衍射峰位置和晶面间距的变化。实验测得铁晶胞λ1 0 0 为 3 .3 3× 10 - 4,此结果表明铁晶胞的微观磁致伸缩系数比棒状、薄膜或粉末压片的系数大约 16倍。对此现象进行了合理的理论解释 ,指出大块材料中的粉末多晶之间具有较大的空隙 ,从而使得宏观磁致伸缩系数变小