台湾集集大地震及其余震的长周期地震动特性

用丰富的高质量数字强震记录对台湾集集大地震及余震的长周期地震动特性进行了研究. 本文主要研究了长周期地震动的强度随震级、距离及场地条件的变化情况;同时对近断层的长周期地震动特性进行了分析. 结果表明,集集大地震及余震的长周期地震动反应谱的形状主要受场地条件和震级控制（D+E类场地的反应谱要比B+C类的宽,震级大的反应谱要比震级小的宽）,而受距离影响并不显著;近断层长周期地震动明显受断层活动特性影响:上盘的长周期地震动比下盘的强,北部的比南部的强.      

Boundary-layer wind structure in a landfalling tropical cyclone

In this study, a slab boundary layer model with a constant depth is used to analyze the boundary-layer wind structure in a landfalling tropical cyclone. Asymmetry is found in both the tangential and radial components of horizontal wind in the tropical cyclone boundary layer at landfall. For a steady tropical cyclone on a straight coastline at landfall, the magnitude of the radial component is greater in the offshoreflow side and the tangential component is greater over the sea, slightly offshore, therefore the greater total wind speed occurs in the offshore-flow side over the sea. The budget analysis suggests that： （1） a greater surface friction over land produces a greater inflow and the nonlinear effect advects the maximum inflow downstream, and （2） a smaller surface friction over the sea makes the decrease of the tangential wind component less than that over land. Moreover, the boundary layer wind structures in a tropical cyclone are related to the locations of the tropical cyclone relative to the coastline due to the different surface frictions. During tropical cyclone landfall, the impact of rough terrain on the cyclone increases, so the magnitude of the radial component of wind speed increases in the offshore-flow side and the tangential component outside the radius of maximum wind speed decreases gradually.     

广州城区晚全新世环境变迁与人类活动

对广州市越秀区解放中路考古遗址剖面进行了年代学、岩性、硅藻和软体动物鉴定等研究,发现广州珠江北岸古城区南部在先秦时期为河道及河口湾湿地/洼地;因河流-河涌的淡水注入使河口盐度降低,故而沉积物中未见较高盐度的微体生物,仅发现了河口型咸水-半咸水硅藻;此时堆积的贝壳大多为淡水种,半咸水种少见,表明先秦(东周)时期,广州地区...     

COVID-19疫情期间全球空气质量变化:臭氧响应的区域间差异

疫情期间全球各地一次排放大幅削减,而臭氧等二次污染的响应则存在着区域间差异.结合地面和卫星观测发现,同在氮氧化物大幅下降的情况下,臭氧在东亚和欧洲呈现出可达14ppb的上升信号,而北美则下降为主(约2-4ppb).我们结合气象分析和臭氧敏感性进一步讨论了臭氧响应差异性的原因,一方面受臭氧与前体物间关系的影响;另一方面来...     

The Austrian node of the natural resources satellite remote sensing cloud service platform:examples of Sino-Austrian cooperation

The Austrian node of the Natural Resources Satellite Remote Sensing Cloud Service Platform was established in 2016 through a cooperation agreement between the Land Satellite Remote Sensing Application Center(LASAC),Ministry of Natural Resources of the Peoples Republic of China and the University of Vienna,Austria.Under this agreement panchromatic and multi-spectral data of the Chinese ZY-3 satellite are pushed to the server at the University of Vienna for use in education and research.So far,nearly 500 GB of data have been uploaded to the server.This technical note briefly introduces the ZY-3 system and illustrates the implementation of the agreement by the first China-Sat Workshop and several case studies.Some of them are already completed,others are still ongoing.They include a geometric accuracy validation of ZY-3 data,an animated visualization of image quick views on a spherical display to demonstrate the time series of the image coverage for Austria and Laos,and the use of ZY-3 data to study the spread of bark beetle in the province of Lower Austria.An accuracy study of DTMs from ZY-3 stereo data,as well as a land cover analysis and comparison of Austria with ZY-3 and other sensors are still ongoing.     

长江经济带开发区空间分布与产业集聚特征研究

采用最近邻指数、Ripley’s L 函数、核密度估计等方法分析长江经济带开发区的空间分布与产业集聚特征,结果表明:① 长江经济带开发区总体上呈东密西疏、东强西弱、东中西段分异的显著集聚分布特征;② 基于主导产业划分的各类开发区在空间上均为集聚分布,集聚强度和规模随距离的增加基本都呈“先增加后减小”的规律,集聚形态各异,主要有“单核心”“双核心”“多核心”3种;③ 长江经济带东段地区主要以装备制造、通信电子、汽车制造、新材料、生物医药等资本技术密集型产业集聚为主,中、西段地区则集聚了化学工业、金属加工、食品制造、纺织服装等资本与劳动密集型产业。要加强经济带上中下游开发区之间的多维良性互动,注重绿色发展、创新发展与结构优化,进一步提升其对长江经济带高质量发展的引领与支撑作用。     

浙江省人口健康脆弱性评估及影响因素分析

运用集对分析法从敏感性和应对性2个方面对浙江省11个地市的人口健康脆弱性进行评估。研究表明：① 从敏感性和应对性2个维度对城市人口健康脆弱性进行评估的方法具有一定可靠性,但在突发大型流行性病毒感染疫情的情境下仍需进一步完善;② 各地市脆弱性指数排名与敏感性指数保持较高一致性,而与应对性指数则表现出异质性和随机性,认为降低敏感性是降低城市人口健康脆弱性指数的关键;③ 城市人口健康脆弱性评价还应该增加城市对大型突发公共卫生事件的敏感性和应对能力的考量,相应的评估方法和模型仍有待进一步研究。     

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.     

基于“模拟实验”落实高中生地理实践力素养的培养与评价--以人教版高中《地理》必修1为例

模拟实验作为地理实践力的主要组成要素之一,在培养高中生求知探索品质、活用所学地理知识、锻炼动手能力等方面具有独特作用。本文结合新课标、校情、学情,划分了地理模拟实验的实践力表现水平层次,以人教版高中《地理》必修1中的热力环流、洋流、火山这三个有代表性的知识点为题材,进行校本化的模拟实验、水平划分和量化测评,实现地理实践力素养培养和评价的落地。     

Extracting invariant characteristics of sketch maps: Towards place query‐by‐sketch

In geography, invariant aspects of sketches are essential to study because they reflect the human perception of real‐world places. A person's perception of a place can be expressed in sketches. In this article, we quantitatively and qualitatively analyzed the characteristics of single objects and characteristics among objects in sketches and the real world to find reliable invariants that can be used to establish references/correspondences between sketch and world in a matching process. These characteristics include category, shape, name, and relative size of each object. Moreover, quantity and spatial relationships—such as topological, ordering, and location relationships—among all objects are also analyzed to assess consistency between sketched and actual places. The approach presented in this study extracts the reliable invariants for query‐by‐sketch and prioritizes their relevance for a sketch‐map matching process.