The Mineral Adsorption and The Application of a Metamorphic Felsic Rock as Aggregate in Asphalt Pavements

Geotechnical and Geological Engineering - The aggregates consist approximately 85% of the total volume in asphalts pavements, and their properties influence directly their behavior. Therefore, it...     

Georeferencing Animal Specimen Datasets

For biodiversity research, the field of study that is concerned with the richness of species of our planet, it is of the utmost importance that the location of an animal specimen find is known with high precision. Due to specimens often having been collected over the course of many years, their accompanying geographical data is often ambiguous or may be very imprecise. In this article, we detail an approach that utilizes reasoning and external sources to improve the geographical information of animal finds. Our main contribution is to show that adding external domain knowledge improves the ability to georeference locations over traditional methods that focus solely on analyzing geographical information. Additionally, our system is able to output the confidence it has in its decisions through a confidence measure based on the difficulty of the instance and the steps undertaken to disambiguate it. Our results show that adding domain knowledge to the georeferencing process increases the accuracy @5km from 38.9% to 61.7% and from 47.0% to 74.5% @25km. Furthermore, we reduce the mean distance by more than half, from 251.1km to 114.5km, and decrease the number of records for which no reference can be found from 26.2% to 7.4%.     

Effects of continuous flow centrifugation on measurements of trace elements in river water: intrinsic contamination and particle fragmentation

Continuous flow centrifugation (CFC) is a well‐established technique used in natural surface water studies to collect large amounts of suspended solids, thus allowing a broad spectrum of measurements. However, a potential contamination or changes in the particle size distribution during the centrifugation may restrain the use of CFC effluents for element analysis in the colloidal and dissolved fractions. In this paper we evaluate the possibility of using the effluent of a Westfalia centrifuge (type KA2‐06‐075, 9700 rpm) for such analysis. This evaluation is based on two laboratory experiments with deionized and tap water and two field experiments in rivers. Elemental concentration changes across the CFC were assessed from the CFC influent and effluent after a filtration at 0·45 µm. Significant increases were found, mainly in the field experiments at a high suspended solids level and a slightly acid pH. A hypothesis was made on the origin of these increases as a superposition of a centrifuge intrinsic contamination and a particle fragmentation effect. A numerical model based on elemental concentration measurements (inductively coupled plasma mass spectrometry) gave a particle fragmentation level of 0·55% (mass percentage of particles broken up into smaller fragments during centrifugation). In another experiment, a direct particle counting (single particle counter) shows an excess of particles smaller than 500 nm in the CFC effluent, corresponding to a fragmentation level of 0·11%. In consequence, the use of CFC effluent for element analysis is possible in low‐turbidity river or lake waters, but should be carefully considered in waters with high suspended matter contents. Copyright © 2006 John Wiley & Sons, Ltd.     

Thrust front segmentation induced by differential slab retreat in the Apennines (Italy)

New seismic reflection data reveal that the south‐eastward prolongation of the Apennine thrust front in the central Adriatic Sea is most likely located in a more external position with respect to the traditional interpretation. In this new interpretation, the Apennine thrust front shows a segmented geometry in correspondence to the Tremiti lithospheric transfer zone. The available data suggest that the north‐eastward flexural retreat of the subducting Adriatic lithosphere and the related frontal accretion of the Apennine accretionary prism have acted during the last 5 Ma and may be considered still lively in both the Po plain and in the Central Adriatic domain, north of the Tremiti lineament. By analysing the tectonic evolution of the Apulo‐Adriatic areas, it may be argued that the differential slab retreat between the central and southern sectors of the subducting Adriatic plate has been able to induce the segmentation of the Apennine thrust front.     

Turbulent Intensities and Velocity Spectra for Bare and Forested Gentle Hills: Flume Experiments

To investigate how velocity variances and spectra are modified by the simultaneous action of topography and canopy, two flume experiments were carried out on a train of gentle cosine hills differing in surface cover. The first experiment was conducted above a bare surface while the second experiment was conducted within and above a densely arrayed rod canopy. The velocity variances and spectra from these two experiments were compared in the middle, inner, and near-surface layers. In the middle layer, and for the canopy surface, longitudinal and vertical velocity variances () were in phase with the hill-induced spatial mean velocity perturbation (Δu) around the so-called background state (taken here as the longitudinal mean at a given height) as predicted by rapid distortion theory (RDT). However, for the bare surface case, and remained out of phase with Δu by about L/2, where L is the hill half-length. In the canopy layer, wake production was a significant source of turbulent energy for , and its action was to re-align velocity variances with Δu in those layers, a mechanism completely absent for the bare surface case. Such a lower ‘boundary condition’ resulted in longitudinal variations of to be nearly in phase with Δu above the canopy surface. In the inner and middle layers, the spectral distortions by the hill remained significant for the background state of the bare surface case but not for the canopy surface case. In particular, in the inner and middle layers of the bare surface case, the effective exponents derived from the locally measured power spectra diverged from their expected  − 5/3 value for inertial subrange scales. These departures spatially correlated with the hill surface. However, for the canopy surface case, the spectral exponents were near  − 5/3 above the canopy though the minor differences from  − 5/3 were also correlated with the hill surface. Inside the canopy, wake production and energy short-circuiting resulted in significant departures from  − 5/3. These departures from  − 5/3 also appeared correlated with the hill surface through the wake production contribution and its alignment with Δu. Moreover, scales commensurate with Von Karman street vorticies well described wake production scales inside the canopy, confirming the important role of the mean flow in producing wakes. The spectra inside the canopy on the lee side of the hill, where a negative mean flow delineated a recirculation zone, suggested that the wake production scales there were ‘broader’ when compared to their counterpart outside the recirculation zone. Inside the recirculation zone, there was significantly more energy at higher frequencies when compared to regions outside the recirculation zone.     

Jitter radiation images, spectra and light curves from a relativistic spherical blastwave

We consider radiation emitted by the jitter mechanism in a Blandford–McKee self-similar blastwave. We assume the magnetic field configuration throughout the whole blastwave meets the condition for the emission of jitter radiation and we compute the ensuing images, light curves and spectra. The calculations are performed for both a uniform and a wind environment. We compare our jitter results to synchrotron results. We show that jitter radiation produces slightly different spectra than synchrotron, in particular between the self-absorption and the peak frequency, where the jitter spectrum is flat, while the synchrotron spectrum grows as  ν^1/3  . The spectral difference is reflected in the early decay slope of the light curves. We conclude that jitter and synchrotron afterglows can be distinguished from each other with good quality observations. However, it is unlikely that the difference can explain the peculiar behaviour of several recent observations, such as flat X-ray slopes and uncorrelated optical and X-ray behaviour.     

Origin of the Multiple Metric Type II Radio Burst Structure Associated with the 2002 July 23 CME

We report on the analysis of a fast (>2,000 km/s) CME-driven shock event observed with the UVCS telescope operating aboard SoHO on 23 July 2002. The same shock was also detected in the metric band by several ground-based radiospectrographs. The peculiarity of this event is the presence in the radio spectra of two intense metric type II bursts features drifting at different rates, together with clear shock/related broadenings of the O VI doublet lines observed by UVCS that were found to be temporally associated with the above radio features. The nature of these multiple radio lanes in the metric band is still under debate. One possible explanation is that they are produced by multiple shock waves generated by different ejections or, alternatively, by the flare and the associated CME. Also, emission from the upstream and downstream shock regions can produce split bands. By adopting a plausible CME model, together with a detailed analysis of the white-light, UV, and radio data associated with this event, we are able to conclude that both the radio and the UV shock signatures were produced by a single shock wave surface generated by the expanding CME.     

Shoshonite and sub-alkaline magmas from an ultrapotassic volcano: Sr–Nd–Pb isotope data on the Roccamonfina volcanic rocks,Roman Magmatic Province,Southern Italy

The Roccamonfina volcano is characterised by two stages of volcanic activity that are separated by volcano-tectonic caldera collapses. Ultrapotassic leucite-bearing rocks are confined to the pre-caldera stage and display geochemical characteristics similar to those of other volcanoes in the Roman Province. After the major sector collapse of the volcano, occurred at ca. 400 ka, shoshonitic rocks erupted from cinder cones and domes both within the caldera and on the external flanks of the pre-caldera Roccamonfina volcano. On the basis of new trace element and Sr–Nd–Pb isotope data, we show that the Roccamonfina shoshonitic rocks are distinct from shoshonites of the Northern Roman Province, but are very similar to those of the Neapolitan volcanoes. The last phases of volcanic activity erupted sub-alkaline magmas as enclaves in trachytic domes, and as lavas within the Monte Santa Croce dome. Ultrapotassic rocks of the pre-caldera composite volcano are plagioclase-bearing leucitites characterised by high levels of incompatible trace elements with an orogenic signature having troughs at Ba, Ta, Nb, and Ti, and peaks at Cs, K, Th, U, and Pb. Initial values of ⁸⁷Sr/⁸⁶Sr range from 0.70926 to 0.70999, ¹⁴³Nd/¹⁴⁴Nd ranges from 0.51213 to 0.51217, while the lead isotope rations vary between 18.788–18.851 for ²⁰⁶Pb/²⁰⁴Pb, 15.685–15.701 for ²⁰⁷Pb/²⁰⁴Pb, and 39.048–39.076 for ²⁰⁸Pb/²⁰⁴Pb. Shoshonites show a similar pattern of trace element depletions and enrichments to the earlier ultrapotassic leucite-bearing rocks but have a larger degree of differentiation and lower concentrations of incompatible trace elements. On the other hand, shoshonitic rocks have Sr, Nd, and Pb isotopes consistently different than pre-caldera ultrapotassic leucite-bearing rocks. ⁸⁷Sr/⁸⁶Sr ranges from 0.70665 to 0.70745, ¹⁴³Nd/¹⁴⁴Nd ranges from 0.51234 to 0.51238, ²⁰⁶Pb/²⁰⁴Pb ranges from 18.924 to 19.153, ²⁰⁷Pb/²⁰⁴Pb ranges from 15.661 to 15.694, and ²⁰⁸Pb/²⁰⁴Pb ranges from 39.084 to 39.212. High-K calc-alkaline samples have intermediate isotopic values between ultrapotassic plagioclase leucitites and shoshonites, but the lowest levels of incompatible trace element contents. It is argued that ultrapotassic magmas were generated in a modified lithospheric mantle after crustal-derived metasomatism. Interaction between the metasomatic agent and lithospheric upper mantle produced a low-melting point metasomatised veined network. The partial melting of the veins alone produced pre-caldera leucite-bearing ultrapotassic magmas. It was possibly triggered by either post-collisional isotherms relaxation or increasing T°C due increasing heat flow through slab tears. Shoshonitic magmas were generated by further melting, at higher temperature, of the same metasomatic assemblage with addition 10–20% of OIB-like astenospheric mantle material. We suggest that addition of astenospheric upper mantle material from foreland mantle, flowing through slab tearing after collision was achieved. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Changes in the rainfall–streamflow regimes related to climate change in a small catchment in Northern Italy

Theoretical and Applied Climatology - Climate change has become an important issue for scientific community, for its numerous impacts, especially on agriculture and environment. To shed light on...