Pacific decadal oscillation impact on East China precipitation and its imprint in new geological documents

This paper briefly introduces the history of the study of the Pacific decadal oscillation (PDO) and explores the relationship between the PDO and sediment grain size from two typical sediment cores from the lower Changjiang (Yangtze River) and Huanghe (Yellow River) estuaries. It is found that the median grain sizes of both cores exhibit relatively high correlation with the PDO. This is because the PDO causes interdecadal variability of precipitation in the East Asia Monsoon region, thus changing the hydrodynamics in both the Changjiang and Huanghe catchments, eventually resulting in variation of sediment grain size. Our analysis also revealed that during different phases of the PDO, the sediment grain size of the Changjiang and Huanghe estuaries showed different variations in cold and warm PDO phases. This is related to movement of the precipitation center driven by the shift in different PDO phases. Moreover, we compared more high resolution geological proxies with the PDO, including stalagmites and tree rings, in East China over the past century. The results indicate that variations of studied geological proxies are generally well correlated with the PDO but have some differences. Finally, longer variations of sediment grain sizes in the Changjiang and Huanghe estuaries are compared with a reconstructed PDO over the last 200 years; sediment grain sizes were still correlated with the PDO, implying that sediment grain size may be used as a new proxy for studying the long-term behavior of the PDO. This result supports previous knowledge of the PDO impact on East China climate evolution and offers a new proxy for further PDO study. Our study will improve paleoenvironment reconstruction in East China on a decadal time scale and benefit future climatic predictions.     

Effect of Time on Dynamic Shear Modulus of Selected Cohesive Soil of One Section of Express Way No. S2 in Warsaw

Several researches published comprehensive reports on dynamic soil properties of cohesive soils, in which many of them outlined, i.e., key factors affecting the dynamic shear modulus. For cohesive soils, the modulus at small strains (g < 10^t-3 %) is, first of all, a function of void ratio and effective confining stress. For clays, however, secondary time effects and clay mineralogy (fabric and structure) also appear to be important. The influence of confinement of laboratory-prepared as well as naturally deposited clays consists in an increase of shear modulus logarithmically as a function of time. In this paper, the effect of duration of the various confining pressures on dynamic shear modulus (G) of selected cohesive soils from Warsaw area was evaluated. Shear modulus was determined on the basis of resonant column tests, at low and high shearing strain amplitudes. It is shown that the calculated shear modulus is time-dependent; during approximately first 1000 minutes of consolidation, the moduli increased by almost 50%. Moreover, it is characterized by two phases: an initial one results from primary consolidation and a second one, which occurs after the end of primary consolidation, herein about 16-17 hours, and is called “long-term time effect”. This effect was found also for modulus at higher shearing strains (γ > 10³%, e.g., 3 × 10³%, 5 × 10³%, 8 × 10³%, 2 × 10³%).     

Refinement of a lunar FeO mapping method

Clementine UVVIS and NIR data from the lunar sampling sites (totaling 46 sampling sites) were processed and used to refine the iron determination method of Le Mouéic et al. (2000, 2002). We found that about 21 sampling sites are unsuitable to Le Mouéic et al's spectral parameters ("slope" and "depth l") because their 1500 nm filter could not be used as spectral parameters' right shoulders and to evaluate the depth of the 1-μm absorption feature accurately. We used the rest 25 sampling sites to refine the method developed by Le Mouéic et al. (2000, 2002 ) and obtained our own equation of FeO content determination. We tested our own equation, and the results are satifactory. In our work we also acquired some useful experiences in scientific applications of our own dataset of the Chang'E-1 mission.     

Impact cratering — fundamental process in geoscience and planetary science

Impact cratering is a geological process characterized by ultra-fast strain rates, which generates extreme shock pressure and shock temperature conditions on and just below planetary surfaces. Despite initial skepticism, this catastrophic process has now been widely accepted by geoscientists with respect to its importance in terrestrial — indeed, in planetary — evolution. About 170 impact structures have been discovered on Earth so far, and some more structures are considered to be of possible impact origin. One major extinction event, at the Cretaceous-Paleogene boundary, has been firmly linked with catastrophic impact, but whether other important extinction events in Earth history, including the so-called “Mother of All Mass Extinctions” at the Permian-Triassic boundary, were triggered by huge impact catastrophes is still hotly debated and a subject of ongoing research. There is a beneficial side to impact events as well, as some impact structures worldwide have been shown to contain significant (in some cases, world class) ore deposits, including the gold-uranium province of the Witwatersrand basin in South Africa, the enormous Ni and PGE deposits of the Sudbury structure in Canada, as well as important hydrocarbon resources, especially in North America. Impact cratering is not a process of the past, and it is mandatory to improve knowledge of the past-impact record on Earth to better constrain the probability of such events in the future. In addition, further improvement of our understanding of the physico-chemical and geological processes fundamental to the impact cratering process is required for reliable numerical modeling of the process, and also for the correlation of impact magnitude and environmental effects. Over the last few decades, impact cratering has steadily grown into an integrated discipline comprising most disciplines of the geosciences as well as planetary science, which has created positive spin-offs including the study of paleo-environments and paleo-climatology, or the important issue of life in extreme environments. And yet, in many parts of the world, the impact process is not yet part of the geoscience curriculum, and for this reason, it deserves to be actively promoted not only as a geoscientific discipline in its own right, but also as an important life-science discipline.     

Integrated geophysical and geochemical study on AMD generation at the Haveri Au–Cu mine tailings,SW Finland

The Haveri tailings area contains 1.5 Mt of sulfide-bearing waste from the Au–Cu mine that operated during 1942–1961. Geophysical and geochemical methods were used to evaluate and characterize the generation of acid mine drainage (AMD). Correlations were examined among the electrical resistivity tomography (ERT) data, the total sulfide content and concentrations of sulfide-bound metals (Cu, Co, Fe, Mn, Ni, Pb and Zn) of tailings samples, and the resistivity and geochemistry of surface water. The resulting geophysical–geochemical model defines an area in the vadose tailings, where a low resistivity anomaly (<10 Ohm m) is correlated with the highest sulfide content, extensive sulfide oxidation and low pH (average 3.1). The physical and geochemical conditions, resulting from the oxidation of the sulfide minerals, suggest that the low resistivity anomaly is associated with acidic and metal-rich porewater (i.e., AMD). The lower resistivity values in the saturated zone of the central impoundment suggest the formation of a plume of AMD. The natural subsoil layer (silt and clay) and the bedrock surface below the tailings area were well mapped from the ERT data. The detected fracture zones of the bedrock that could work as leakage pathways for AMD were consistent with previous geological studies. The integrated methodology of the study offers a promising approach to fast and reliable monitoring of areas of potential AMD generation and its subsurface movement over large areas (ca. 9 ha). This methodology could be helpful in planning drill core sampling locations for geochemical and mineralogical analysis, groundwater sampling, and choosing and monitoring remedial programs.     

Comparison of net primary productivity in karst and non-karst areas: a case study in Guizhou Province,China

Green plants play an important role in energy flows and material cycles. The net primary productivity (NPP) reflects the capability of vegetation to convert solar energy into photosynthate (fixed carbon). Understanding the factors that contribute to variations in NPP is of key importance for improving the rock-desertification environment in karst areas. In this paper, the NPP model (Light Use Efficiency model) is modified on the basis of remote sensing data [moderate resolution imaging spectroradiometer (MODIS)], climate data and observed information. Then the model is employed to estimate the spatial–temporal variations of NPP in the Guizhou Province, China. Finally, the NPP differences between karst area and non-karst area, and the relationships between NPP and climate factors are analyzed. The results show that the NPP estimated using MODIS data are reasonable. The mean NPP of territorial vegetation is 421.46 gC m⁻² year⁻¹; the NPP in the non-karst area is 13.3% higher than that in the karst area; the correlation degree between NPP and precipitation is better in southeastern and western districts.     

Isotopic tracers for water masses in the coastal region of eastern Hokkaido

In this study we used two stable isotopes, δ¹³C and δ¹⁸O, for water mass classification in the coastal region off eastern Hokkaido. δ¹³C* values, which were corrected for the biological effect, and δ ¹⁸O values up to 300 m depth suggested that the isotopic character of the onshore and offshore water in the southern Okhotsk Sea, the Nemuro Strait and the western North Pacific could be explained by the mixing of three source waters: the Oyashio water (OYW), Soya Warm Current water (SWCW) and East Sakhalin Current water (ESCW). In summer, δ ¹³C*-δ ¹⁸O plots indicated mixing between SWCW from the southern Okhotsk Sea and OYW in the Pacific coast of southeastern Hokkaido, while temperature-salinity plots of the onshore water showed minimal difference from the offshore OYW. In winter, on the other hand, the mixed water of ESCW and OYW (or SWCW) appeared in the Pacific coastal region, distributed as cold, low salinity onshore water. Finally, we estimated mixing ratios of OYW, SWCW and ESCW in the coastal region of western North Pacific using their mean values of δ ¹³C* and δ ¹⁸O as endmembers. These results suggest seasonal and yearly changes of water mass combination en route from the southern Okhotsk Sea to the western North Pacific.     

Features of coastal upwelling regions that determine net air-sea CO<Subscript>2</Subscript> flux

The influence of the coastal ocean on global net annual air-sea CO₂ fluxes remains uncertain. However, it is well known that air-sea pCO₂ disequilibria can be large (ocean pCO₂ ranging from ∼400 μatm above atmospheric saturation to ∼250 μatm below) in eastern boundary currents, and it has been hypothesized that these regions may be an appreciable net carbon sink. In addition it has been shown that the high productivity in these regions (responsible for the exceptionally low surface pCO₂) can cause nutrients and inorganic carbon to become more concentrated in the lower layer of the water column over the shelf relative to adjacent open ocean waters of the same density. This paper explores the potential role of the winter season in determining the net annual CO₂ flux in temperate zone eastern boundary currents, using the results from a box model. The model is parameterized and forced to represent the northernmost part of the upwelling region on the North American Pacific coast. Model results are compared to the few summer data that exist in that region. The model is also used to determine the effect that upwelling and downwelling strength have on the net annual CO₂ flux. Results show that downwelling may play an important role in limiting the amount of CO₂ outgassing that occurs during winter. Finally data from three distinct regions on the Pacific coast are compared to highlight the importance of upwelling and downwelling strength in determining carbon fluxes in eastern boundary currents and to suggest that other features, such as shelf width, are likely to be important.     

Some chemical characteristics of the brines in Bannock and Tyro Basins: salinity, sulphur compounds, Ca, F, pH, At, PO4, SiO2, NH3

Results of the chemical investigation on the Bannock and Tyro Basins are reported.Both basins were found to be hypersaline ( 10 times higher than salinity of normal seawater) and anoxic. In all investigated basins a region of transition, a few meters thick, was identified at depths > 3327 dbar. It is characterized by a sharp gradient of salinity, and all concentrations of analysed species increase strongly except for dissolved oxygen and nitrate, which immediately drop to zero. This region appears as a sharp boundary that prevents mixing. As a result, in the presence of organic matter, an anoxic condition developed with the complete depletion of dissolved oxygen. At the same time, hydrogen sulphide and ammonium accumulated within the brine. Between the Bannock and the Tyro brines differences occur in the measured concentrations of H₂S, SO²⁻₄, Ca²⁺ and NH₃. There are some differences also within the Bannock area sub-basins.The Libeccio sub-basin, in the Bannock area, contains a double-layered brine: the upper layer is 140 dbar thick and the lower layer is 300 dbar thick. A second interface between upper and lower brines develops at a depth of 3500 dbar. Nearly all of the measured concentrations vs. depth show the double layer, with the exception of ammonium, the concentration of which remains nearly constant throughout the anoxic column. Profiles of the other species analyzed show remarkable differences on passing from the upper to the lower brine. Hydrogen sulphide, sulphate and fluoride concentrations appear constant and then increase at the second interface. The calcium concentration is also constant in the upper brine, but decreases at the second interface. Total alkalinity and phosphate concentrations show a maximum peak just below the first interface. However, after passing through the second interface all the chemical parameters exhibit an almost constant behaviour down to the bottom.Hypersaline conditions are attributed to the dissolution of Messinian evaporite, and anoxia is suggested to originate from the oxidation of organic matter present in sediments and from the absence of bottom water circulation in such a deep and enclosed environment.The chemical conditions can be summarized as follows: in the Libeccio Basin the values for the species analysed have the ranges: 39–321 psu for ‘salinity’, 8.2−6.5 for pH, 2.7–4.0 mM for total alkalinity, 0.2-0 mM for dissolved oxygen, 0–1669 μM for hydrogen sulphide, 0–198 μM for thiol, 31–99 mM for sulphate, 11–21 mM for calcium, 7–100 μM for fluoride, 0.2–3080 μM for ammonium, 5.8-0 μM for nitrite, 0.2–12 μM for phosphate and 8–130 μM for silicate.     

Rare earth elements in bottom sediments of major rivers around the Yellow Sea: implications for sediment provenance

Rare earth elements (REEs) of 91 fine-grained bottom sediment samples from five major rivers in Korea (the Han, Keum, and Yeongsan) and China (the Changjiang and Huanghe) were studied to investigate their potential as source indicator for Yellow Sea shelf sediments, this being the first synthetic report on REE trends for bottom sediments of these rivers. The results show distinct differences in REE contents and their upper continental crust (UCC)-normalized patterns: compared to heavy rare earth elements (HREEs), light rare earth elements (LREEs) are highly enriched in Korean river sediments, in contrast to Chinese river sediments that have a characteristic positive Eu anomaly. This phenomenon is observed also in primary source rocks within the river catchments. This suggests that source rock composition is the primary control on the REE signatures of these river sediments, due largely to variations in the levels of chlorite and monazite, which are more abundant in Korean bottom river sediments. Systematic variations in ΣLREE/ΣHREE ratios, and in (La/Yb)–(Gd/Yb)_UCC but also (La/Lu)–(La/Y)_UCC and (La/Y)–(Gd/Lu)_UCC relations have the greatest discriminatory power. These findings are consistent with, but considerably expand on the limited datasets available to date for suspended sediments. Evidently, the REE fingerprints of these river sediments can serve as a useful diagnostic tool for tracing the provenance of sediments in the Yellow Sea, and for reconstructing their dispersal patterns and the circulation system of the modern shelf, as well as the paleoenvironmental record of this and adjoining marginal seas.