Modelling and mass balance assessments of nutrient retention in a seasonally-flowing estuary (Swan River Estuary,Western Australia)

An integrated mass balance and modelling approach for analysis of estuarine nutrient fluxes is demonstrated in the Swan River Estuary, a microtidal system with strong hydrological dependence on seasonal river inflows. Mass balance components included estimation of gauged and ungauged inputs to the estuary and losses to the ocean (outflow and tidal exchange). Modelling components included estimation of atmospheric (N fixation, denitrification) and sediment–water column nutrient exchanges. Gross and net denitrification derived using two independent methods were significantly correlated (r² = 0.49, p < 0.01) with net rates averaging 40% of gross. Annual nitrogen (N) and phosphorus (P) loads from major tributaries were linearly correlated with annual freshwater discharge and were 3-fold higher in wet years than in dry years. Urban drains and groundwater contributed, on average, 26% of N inputs and 19% of P inputs, with higher relative contributions in years of low river discharge. Overall, ungauged inputs accounted for almost 35% of total nitrogen loads. For N, elevated loading in wet years was accompanied by large increases in outflow (7x) and tidal flushing (2x) losses and resulted in overall lower retention efficiency (31%) relative to dry years (70%). For P, tidal flushing losses were similar in wet and dry years, while outflow losses (4-fold higher) were comparable in magnitude to increases in loading. As a result, P retention within the estuary was not substantially affected by inter-annual variation in water and P loading (ca. 50% in all years). Sediment nutrient stores increased in most years (remineralisation efficiency ca. 50%), but sediment nutrient releases were significant and in some circumstances were a net source of nutrients to the water column.     

Simulation of nonlinear wave run-up with a high-order Boussinesq model

This paper considers the numerical simulation of nonlinear wave run-up within a highly accurate Boussinesq-type model. Moving wet–dry boundary algorithms based on so-called extrapolating boundary techniques are utilized, and a new variant of this approach is proposed in two horizontal dimensions. As validation, computed results involving the nonlinear run-up of periodic as well as transient waves on a sloping beach are considered in a single horizontal dimension, demonstrating excellent agreement with analytical solutions for both the free surface and horizontal velocity. In two horizontal dimensions cases involving long wave resonance in a parabolic basin, solitary wave evolution in a triangular channel, and solitary wave run-up on a circular conical island are considered. In each case the computed results compare well against available analytical solutions or experimental measurements. The ability to accurately simulate a moving wet–dry boundary is of considerable practical importance within coastal engineering, and the extension described in this work significantly improves the nearshore versatility of the present high-order Boussinesq approach.     

Environmental controls on phytoplankton community composition in the Thames plume, U.K.

The aim of this study was to investigate controls on the phytoplankton community composition and biogeochemistry of the estuarine plume zone of the River Thames, U.K. using an instrumented moored buoy for in situ measurements and preserved sample collection, and laboratory-based measurements from samples collected at the same site. Instrumentation on the moored buoy enabled high frequency measurements of a suite of environmental variables including in situ chlorophyll, water-column integrated irradiance, macronutrients throughout an annual cycle for 2001 e.g. nitrate and silicate, and phytoplankton biomass and species composition. The Thames plume region acts as a conduit for fluvial nutrients into the wider southern North Sea with typical winter concentrations of 45 μM nitrate, 17 μM silicate and 2 μM phosphate measured. The spring bloom resulted from water-column integrated irradiance increasing above 60 W h m^− 2 d^− 1 and was initially dominated by a diatom bloom mainly composed of Nitzschia sp. and Odontella sinesis. The spring bloom then switched after  30 days to become dominated by the flagellate Phaeocystis reaching a maximum chlorophyll concentration of 37.8 μg L^− 1. During the spring bloom there were high numbers of the heterotrophic dinoflagellates Gyrodinium spirale and Katodinium glaucum that potentially grazed the phytoplankton bloom. This diatom–flagellate switch was predicted to be due to a combination of further increasing water-column integrated irradiance > 100 W h m^− 2 d^− 1 and/or silicate reaching potentially limiting concentrations (< 1 μM). Post spring bloom, diatom dominance of the lower continuous summer phytoplankton biomass occurred despite the low silicate concentrations (Av. 0.7 μM from June–August). Summer diatom dominance, generally due to Guinardia delicatula, was expected to be as a result of microzooplankton grazing, dominated by the heterotrophic dinoflagellate Noctiluca scintillans, controlling 0.7–5.0 μm ‘flagellate’ fraction of the phytoplankton community with grazing rates up to 178% of ‘flagellate’ growth rate. The Thames plume region was therefore shown to be an active region of nutrient and phytoplankton processing and transport to the southern North Sea. The use of a combination of moorings and ship-based sampling was essential in understanding the factors influencing nutrient transport, phytoplankton biomass and species composition in this shelf sea plume region.     

Acquisition of industrial enterprises and its relations with regional identity: The case of the beer industry in Central Europe

ABSTRACT

The development of globalisation has ushered in fundamental changes that have led to a break in the relationship between places of production and places of consumption, and sometimes a rejection of global products and corporations at the local level in accordance with neolocalism. The objective of the article is to examine the effect of regional identity on the local impacts of global processes by applying a multilevel analysis of the brewing industry, in which consumers are very sensitive to changes in the beer offered and can influence it, for example by putting pressure on representatives of restaurants. Beginning with extensive research on the international level, the authors point out the various impacts of brewery acquisitions in three Central European countries – Czechia, Poland and Slovakia – that differ regarding the role of beer in the identity of their inhabitants. Thereafter, they focus on two Czech beer brands, the production of which was relocated to other regions after acquisitions. Based on field studies in the regions of the brands’ original production, the authors find that both brands lost popularity among their original customers. They conclude that for Czech customers, the place of production may be an important factor when choosing a beer brand.     

Strain analysis of a seismically imaged mass‐transport complex,offshore Uruguay

Strain style, magnitude and distribution within mass‐transport complexes (MTCs) are important for understanding the process evolution of submarine mass flows and for estimating their runout distances. Structural restoration and quantification of strain in gravitationally driven passive margins have been shown to approximately balance between updip extensional and downdip contractional domains; such an exercise has not yet been attempted for MTCs. We here interpret and structurally restore a shallowly buried (c. 1,500 mbsf) and well‐imaged MTC, offshore Uruguay using a high‐resolution (12.5 m vertical and 15 × 12.5 m horizontal resolution) three‐dimensional seismic‐reflection survey. This allows us to characterise and quantify vertical and lateral strain distribution within the deposit. Detailed seismic mapping and attribute analysis shows that the MTC is characterised by a complicated array of kinematic indicators, which vary spatially in style and concentration. Seismic‐attribute extractions reveal several previously undocumented fabrics preserved in the MTC, including internal shearing in the form of sub‐orthogonal shear zones, and fold‐thrust systems within the basal shear zone beneath rafted‐blocks. These features suggest multiple transport directions and phases of flow during emplacement. The MTC is characterised by a broadly tripartite strain distribution, with extensional (e.g. normal faults), translational and contractional (e.g. folds and thrusts) domains, along with a radial frontally emergent zone. We also show how strain is preferentially concentrated around intra‐MTC rafted‐blocks due to their kinematic interactions with the underlying basal shear zone. Overall, and even when volume loss within the frontally emergent zone is included, a strain difference between extension (1.6–1.9 km) and contraction (6.7–7.3 km) is calculated. We attribute this to a combination of distributed, sub‐seismic, ‘cryptic’ strain, likely related to de‐watering, grain‐scale deformation and related changes in bulk sediment volume. This work has implications for assessing MTCs strain distribution and provides a practical approach for evaluating structural interpretations within such deposits.     

Clinoform architecture and along‐strike facies variability through an exhumed erosional to accretionary basin margin transition

Exhumed basin margin‐scale clinothems provide important archives for understanding process interactions and reconstructing the physiography of sedimentary basins. However, studies of coeval shelf through slope to basin‐floor deposits are rarely documented, mainly due to outcrop or subsurface dataset limitations. Unit G from the Laingsburg depocentre (Karoo Basin, South Africa) is a rare example of a complete basin margin scale clinothem (>60 km long, 200 m‐high), with >10 km of depositional strike control, which allows a quasi‐3D study of a preserved shelf‐slope‐basin floor transition over a ca. 1,200 km² area. Sand‐prone, wave‐influenced topset deposits close to the shelf‐edge rollover zone can be physically mapped down dip for ca. 10 km as they thicken and transition into heterolithic foreset/slope deposits. These deposits progressively fine and thin over tens of km farther down dip into sand‐starved bottomset/basin‐floor deposits. Only a few km along strike, the coeval foreset/slope deposits are bypass‐dominated with incisional features interpreted as minor slope conduits/gullies. The margin here is steeper, more channelized and records a stepped profile with evidence of sand‐filled intraslope topography, a preserved base‐of‐slope transition zone and sand‐rich bottomset/basin‐floor deposits. Unit G is interpreted as part of a composite depositional sequence that records a change in basin margin style from an underlying incised slope with large sand‐rich basin‐floor fans to an overlying accretion‐dominated shelf with limited sand supply to the slope and basin floor. The change in margin style is accompanied with decreased clinoform height/slope and increased shelf width. This is interpreted to reflect a transition in subsidence style from regional sag, driven by dynamic topography/inherited basement configuration, to early foreland basin flexural loading. Results of this study caution against reconstructing basin margin successions from partial datasets without accounting for temporal and spatial physiographic changes, with potential implications on predictive basin evolution models.     

Ranking of Placer Gold Prospects in Chile Through Analytic Hierarchy Process

Chile has a rich, but poorly known history of placer gold mining. At present, this sector is almost nonexistent and there are some restrictions for its revival: disperse and partial information on existing resources and limited technical expertise to assess the potential of placer gold mine sites. This paper presents the background, methodology and results of the prioritization process of known prospects of this kind in Chile. This research was part of a publicly funded project aimed to incentivize the development of this industry. The ranking was carried out using the analytic hierarchy process, which allowed to include different quantitative and qualitative variables related to the economic potential, technical aspects, contextual viability and socioeconomic factors in the analysis. The results show that, despite the increasing relevance of environmental and community issues in mining development, the business potential and the economic/technical aspects are the main factors in the early selection of a site to advance in exploration and development activities. Both variables represented around 40% and 37% of weights in the final selection, respectively. In contrast, contextual viability and local socioeconomic impacts only accounted for the remaining 23%. This study also shows that the inclusion of experts with different backgrounds in the process enriches the analysis and does not significantly distort the final outcome of the prioritization. Finally, the relevance of using MCDM tools when assessing the attractiveness of mine sites for their development is highlighted, particularly when public funds for subsequent exploration activities are committed.

     

Geochemical Prospectivity Mapping Through a Feature Extraction–Selection Classification Scheme

Natural Resources Research - Machine learning (ML) schemes can enhance success in geochemical prospectivity mapping. This study has examined the effectiveness of several feature extraction or...     

Evidence for multiple 4.0–3.7 Ga impact events within the Apollo 16 collection

In a histogram of lunar impact ages from the Apollo 16 site, there is a spike circa 3.9 Ga that has been interpreted to represent either a large number of nearly synchronous events or an abundance of samples that were affected slightly differently by the event that produced the Imbrium basin. To further scrutinize those age relationships, we extracted six centimeter‐sized clasts of impact melt from ancient regolith breccia 60016 and performed petrological and geochronological (⁴⁰Ar‐³⁹Ar) analyses. Three clasts have similar poikilitic textures, while others have porphyritic, aphanitic, or intergranular textures. Compositions and abundances of relict minerals are different in all six clasts and variously imply Mg‐suite and ferroan anorthosite target sequences. Estimated bulk compositions of four clasts are similar to previously defined group 1 Apollo 16 impact melt rocks, while the other two have higher Al₂O₃ and lower FeO+MgO compositions. All six clasts have similar K₂O and P₂O₅ concentrations, which could have been derived from a KREEP‐bearing component among target sequences. Eighteen ⁴⁰Ar/³⁹Ar analyses of the six clasts produced an age range from 3823 ± 75 to 4000 ± 23 Ma, consistent with estimates for the proposed late heavy bombardment. Four clasts have multiple temperature steps that define plateau ages. These ages are distinct, so they cannot be explained by a single impact event, such as the one that produced the Imbrium impact basin. The conclusion that these represent distinct ages remains after considering the possibility of artifacts in defining plateaus.