The First Discovery of the Easternmost Jehol Biota from Southeastern Jilin,China

正Objective The Jehol Biota,a world-famous Early Cretaceous fossil Lagerst?tte characterized by the traditional Eosestheria-Ephemeropsis-Lycoptera(EEL)assemblage,has a wide distribution over most parts of northern China,the coastal area of southeastern China,southeastern Mongolia,Transbaikalian area of Russia,Korea and Japan(Shao et al.,2017).The Baishan Basin,situated in     

Adjoint analysis of Buckley-Leverett and two-phase flow equations

This paper analyzes the adjoint equations and boundary conditions for porous media flow models, specifically the Buckley-Leverett equation, and the compressible two-phase flow equations in mass conservation form. An adjoint analysis of a general scalar hyperbolic conservation law whose primal solutions include a shock jump is initially presented, and the results are later specialized to the Buckley-Leverett equation. The non-convexity of the Buckley-Leverett flux function results in adjoint characteristics that are parallel to the shock front upstream of the shock and emerge from the shock front downstream of the shock. Thus, in contrast to the behavior of Burgers’ equation where the adjoint is continuous at a shock, the Buckley-Leverett adjoint, in general, contains a discontinuous jump across the shock. Discrete adjoint solutions from space-time discontinuous Galerkin finite element approximations of the Buckley-Leverett equation are shown to be consistent with the derived closed-form analytical solutions. Furthermore, a general result relating the adjoint equations for different (though equivalent) primal equations is used to relate the two-phase flow adjoints to the Buckley-Leverett adjoint. Adjoint solutions from space-time discontinuous Galerkin finite element approximations of the two-phase flow equations are observed to obey this relationship.     

Evaluating Tidal Wetland Restoration Performance Using National Estuarine Research Reserve System Reference Sites and the Restoration Performance Index (RPI)

Evaluations of tidal wetland restoration efforts suffer from a lack of appropriate reference sites and standardized methods among projects. To help address these issues, the National Estuarine Research Reserve System (NERRS) and the NOAA Restoration Center engaged in a partnership to monitor ecological responses and evaluate 17 tidal wetland restoration projects associated with five reserves. The goals of this study were to (1) determine the level of restoration achieved at each project using the restoration performance index (RPI), which compares change in parameters over time between reference and restoration sites, (2) compare hydrologic and excavation restoration projects using the RPI, (3) identify key indicator parameters for assessing restoration effectiveness, and (4) evaluate the value of the NERRS as reference sites for local restoration projects. We found that the RPI, modified for this study, was an effective tool for evaluating relative differences in restoration performance; most projects achieved an intermediate level of restoration from 2008 to 2010, and two sites became very similar to their paired reference sites, indicating that the restoration efforts were highly effective. There were no differences in RPI scores between hydrologic and excavation restoration project types. Two abiotic parameters (marsh platform elevation and groundwater level) were significantly correlated with vegetation community structure and thus can potentially influence restoration performance. Our results highlight the value of the NERRS as reference sites for assessing tidal wetland restoration projects and provide improved guidance for scientists and restoration practitioners by highlighting the RPI as a trajectory analysis tool and identifying key monitoring parameters.     

Increase in Dissolved Silica of Rivers Due to a Volcanic Eruption in an Estuarine Bay (Sorsogon Bay,Philippines)

Mount Bulusan, the Philippines’ fourth most active volcano, erupted in February 21, 2011, sending volcanic ash and pyroclastic materials to its surrounding rivers. The waters drained into the estuary of harmful algal blooms plagued Sorsogon Bay. We aim to determine the impact of the 2011 volcanic eruption and the preceding volcanic ash emissions to the dissolved silica concentration of rivers draining the flanks of Mt. Bulusan and its possible implications to the phytoplankton assemblage of the bay. Six river water sampling periods from August 2010 to October 2012 overlapped with Mt. Bulusan’s active phase of volcanism. Our data shows that mean river silica from pre-eruption levels of ~?500 μM increased by more than 200% during and post-eruption. Highest Si concentration of 2270 μM was measured from Cadacan River in August 2011. Here, we argue that the sustained general increase of dissolved silica is due to the silica-containing materials from Mt. Bulusan’s eruption and that their concentration in river waters is also a function of watershed lithology and precipitation. Increase in dissolved silica and other nutrients caused a shift to diatom domination and, possibly, termination of Pyrodinium bahamense var. compressum blooms. Silica load increase in embayments is a natural process that controls the dominance of algae. Our study also highlights the importance of Philippine rivers to the global ocean silica budget as a function of high precipitation, tectonics in general, and volcanism in particular.     

Using Simple Dilution Models to Predict New Zealand Estuarine Water Quality

A tool based on simple dilution models is developed to predict potential nutrient concentrations and flushing times for New Zealand estuaries. Potential nutrient concentrations are the concentrations that would occur in the absence of nutrient uptake or losses through biogeochemical processes, and so represent the pressure on a system due to nutrient loading. The dilution modelling approach gives a single time- and space-averaged concentration as a function of flow and nutrient input, with the capability to include seasonal nutrient and flow differences. This tool is intended to be used to identify estuaries likely to be highly sensitive to current nutrient loads based on their physical attributes, or to quickly compare the effects of different land-use scenarios on estuaries. The dilution modelling approach is applied both to a case study of a single New Zealand estuary, and used in a New Zealand-wide assessment of 415 estuaries. For the NZ-wide assessment, annual nutrient loads to each estuary were obtained from a GIS-based land-use model. Comparison with measured data shows that the predicted potential nitrate concentrations are significantly correlated with, but higher than, measured nitrate values from water quality sampling time series. This is consistent with expectations given that the measured concentrations include the effects of nitrogen uptake and loss. The estuary dilution modelling approach is currently incorporated into the GIS-land use model, and is also available as a web-app for assessing eutrophication susceptibility of New Zealand estuaries.     

Automated Extraction of a Five‐Year LA‐ICP‐MS Trace Element Data Set of Ten Common Glass and Carbonate Reference Materials: Long‐Term Data Quality,Optimisation and Laser Cell Homogeneity

LA‐ICP‐MS is increasingly applied to obtain quantitative multi‐element data with minimal sample preparation, usually achieved by calibration using reference materials (RMs). However, some ubiquitous RMs, for example the NIST SRM 61× series glasses, suffer from reported value uncertainties for certain elements. Moreover, no long‐term data set of analyses conducted over a range of ablation and tuning conditions exists. Thus, there has been little rigorous examination of the extent to which offsets between measured and reported values are the result of error in these values rather than analytically induced fractionation. We present new software (‘LA‐MINE’), capable of extracting LA‐ICP‐MS data with no user input, and apply this to our system, yielding over 5 years of data (~ 5700 analyses of ten glass and carbonate RMs). We examine the relative importance of systematic analytical bias and possible error in reported values through a mass‐specific breakdown of fourteen of the most commonly determined elements. Furthermore, these data, obtained under a wide range of different ablation conditions, enable specific recommendations of how data quality may be improved, for example the role of diatomic gas, the effect of differential inter‐glass fractionation factors and choice of transport tubing material. Finally, these data demonstrate that the two‐volume Laurin ablation cell is characterised by no discernible spatial heterogeneity in measured trace element ratios.     

Defining the Potential of Nanoscale Re‐Os Isotope Systematics Using Atom Probe Microscopy

Atom probe microscopy (APM) is a relatively new in situ tool for measuring isotope fractions from nanoscale volumes (< 0.01 μm³). We calculate the theoretical detectable difference of an isotope ratio measurement result from APM using counting statistics of a hypothetical data set to be ± 4δ or 0.4% (2s). However, challenges associated with APM measurements (e.g., peak ranging, hydride formation and isobaric interferences), result in larger uncertainties if not properly accounted for. We evaluate these factors for Re‐Os isotope ratio measurements by comparing APM and negative thermal ionisation mass spectrometry (N‐TIMS) measurement results of pure Os, pure Re, and two synthetic Re‐Os‐bearing alloys from Schwander et al. (2015, Meteoritics and Planetary Science, 50, 893) [the original metal alloy (HSE) and alloys produced by heating HSE within silicate liquid (SYN)]. From this, we propose a current best practice for APM Re‐Os isotope ratio measurements. Using this refined approach, mean APM and N‐TIMS ¹⁸⁷Os/¹⁸⁹Os measurement results agree within 0.05% and 2s (pure Os), 0.6–2% and 2s (SYN) and 5–10% (HSE). The good agreement of N‐TIMS and APM ¹⁸⁷Os/¹⁸⁹Os measurements confirms that APM can extract robust isotope ratios. Therefore, this approach permits nanoscale isotope measurements of Os‐bearing alloys using the Re‐Os geochronometer that could not be measured by conventional measurement principles.     

Ghaleh-khargushi rhyodacite and Gorid andesite from Iran: characterization,uses, and durability

Durability of building stones is an important issue in sustainable development. Crystallization of soluble salts is recognized as one of the most destructive weathering agents of building stones. For this reason, durability of Ghaleh-khargushi rhyodacite and Gorid andesite from Iran was investigated against sodium sulfate crystallization aging test. Petrographic and physico-mechanical properties and pore size distribution of these stones were examined before and after the aging test. The characteristics of the microcracks were quantified with fluorescence-impregnated thin sections. Durability and physico-mechanical characteristics of Ghaleh-khargushi rhyodacite are mainly influenced by preferentially oriented preexisting microcracks. Stress induced by salt crystallization led to the widening of preexisting microcracks in Ghaleh-khargushi rhyodacite, as confirmed by the pore size distributions before and after the aging test. The preexisting microcracks of Gorid andesite were attributed to the mechanical stress induced by contraction of lava during cooling. The number of transcrystalline microcracks was significantly increased after the aging test. The degree of plagioclase microcracking was proportional to its size. Durability of the studied stones depends on initial physico-mechanical properties, pore size distribution, and orientation of microcracks. Initial effective porosity is found to be a good indicator of the stones’ durability. Salt crystallization resulted in an increase in the effective porosity with a parallel decrease in the wave velocities. Surface microroughness parameters increased with the development of salt crystallization-induced microcracking. Gorid andesite showed higher quality and durability than Ghaleh-khargushi rhyodacite.