Measurement of stress effects (scope for growth) and contaminant levels in mussels (Mytilus edulis) collected from the Irish Sea

The objective of this research was to quantify the impact of pollution along the coastlines of the Irish Sea. Pollution assessment was based on the combined measurement of scope for growth (SFG), and chemical contaminants in the tissues of mussels (Mytilus edulis) collected from 38 coastal sites around the Irish Sea during June-July in 1996 and 1997. On the UK mainland coast, the SFG showed a general trend with a significant decline in water quality in the Liverpool and Morecambe Bay region. High water quality was recorded along the west coast of Wales, as well as southwest England and northwest Scotland (clean reference sites outside the Irish Sea). Along the coast of Ireland there was a similar trend with reduced SFG within the Irish Sea region. SFG was generally low north of Duncannon and then improved north of Belfast. The poor water quality on both sides of the Irish Sea is consistent with the prevailing hydrodynamics and the spatial distribution of contaminants associated with urban/ industrial development. The decline in SFG of mussels on both sides of the Irish Sea was associated with a general increase in contaminant levels in the mussels. Certain contaminants, including PAHs, TBT, sigmaDDT, Dieldrin, gamma-HCH, PCBs, and a few of the metals (Cd, Se, Ag, Pb), showed elevated concentrations. Many of these contaminants were particularly elevated in the coastal margins of Liverpool Bay, Morecambe Bay and Dublin Bay. A quantitative toxicological interpretation (QTI) of the combined tissue residue chemistry and SFG measurements indicated that at the majority of coastal sites, c. 50 to > 80% of the observed decline in SFG was due to PAHs as a result of fossil fuel combustion and oil spills. TBT levels were highest at major ports and harbours, but these concentrations only made a minor contribution to the overall reduction in SFG. At no sites were individual metals accumulated to concentrations that could cause a significant effect on SFG. The study identified many sites where the observed reduction in SFG was far greater than predicted from the limited number of chemical contaminants analysed, thus indicating the presence of additional 'unknown toxicants'. Sewage (containing domestic, agricultural and industrial components) appears to be an important contributor to reduced SFG and linear alkylbenzenes (LABs) and As may provide suitable 'sewage markers'. There was a highly significant positive correlation between SFG and As (P < 0.001). This relationship may be due to reduced As uptake by algal food material and mussels at sites with elevated P04 concentrations (e.g. at sites with sewage inputs). Phosphate is a known competitive inhibitor of As accumulation, at least in algae. The results highlight that further research is required on 'sewage markers' in mussels. The SFG approach therefore provides a rapid, cost-effective and quantitative measure of pollution impact, as well as a means of identifying the causes through a QTI of tissue contaminants levels. It also serves to identify the presence of unidentified toxicants and areas that require further study.     

Virgin rock temperatures from well logs — accuracy analysis for some advanced inversion models

Temperature data from 18 measurement series obtained during logging of the Oseberg field in the northern North Sea are presented. Because the measurement series are taken at approximately the same depth, they should give identical temperatures after depth correction, and are suitable for assessing the performance of different models used to determine virgin rock temperatures from well log information.We have used this data set to test the properties of the different models given by Shen and Beck (1986). Although these models were built to simulate closely the thermal recovery of a well and are unbiased, the uncertainties in the temperature estimates when applied to real data are found to be no less than those from simpler (biased) models. This fact confirms the conclusion of Hermanrud (1989a) who showed that physical factors other than those presently accounted for significantly influence the thermal recovery of a borehole.     

Sedimentology of a subtidal,tide-dominated sand body in the Yellow Sea,southwest Korea

Odanam Satoe, a subtidal, tide-dominated sand body in the Yellow Sea, Korea, is linear in plan and asymmetrical in cross-section. It consists of fine- to medium-grained, well-sorted subangular sand. Bedforms consist of high-amplitude (1–2 m) sandwaves on the lower flanks of the gentler-sloping bar surface, and medium-amplitude (0.5-1 m) sandwaves on the sand body trough adjoining the steeper face, the bar crest and shallower parts of the gently sloping bar surface. Bedforms are absent on the relatively steeper bar surface, which is characterized by 2° slopes. Bedform orientation on the gentler slope is oblique by 30° to the bar crest, parallel to the sand-body crest on the crest itself, and opposite to the steeper sand-body face in the trough below the steeper slope of the bar.Bottom current velocity data show that tidal currents are semi-rotary with a flood time—velocity asymmetry over the gentler slope, and ebb time—velocity asymmetry over the steeper slope during most of the tidal cycle. Tidal-current flow parallels bar elongation over the steeper slope, whereas over the gentler slope, tidal-current flow is directed at 30° to the bar crest and changes to normal to the crest one hour prior to low tide. Bedform orientation mapped with side-scan sonar shows agreement with these flow directions.Sand dispersal around the sand body is controlled by time—velocity asymmetry and partial rotary flow directions of tidal currents. This circulation causes not only a trapezoidal mode of grain dispersal, but also westerly migration of the sand body documented from comparative bathymetric surveys in 1964 and 1980.     

Depth Zonation, Micro habitat, and Morphology of Three Species of Acanthemblemaria (Pisces: Blennioidea) in the Guif of California, Mexico

Abstract. The utilization of the spatial resources of refuge type, size and depth placement is investigated in the three sympatric species of Acanthemblemaria at the cape region of Baja California, Mexico. A. balanorum occupies barnacle testes (Balanus tintinnabulum), A. macrospilus occupies barnacles and mollusk tubes (vermetid gastropods and pholadids), and A. crockeri occupies only mollusk tubes (pholadids). Refuge diameter overlap is higher than overlap in depth. A. crockeri consistently occupies depths below 5m. Competition experiments for barnacle refuges among the three species indicate that A. balanorum is a superior competitor for such refuges. Prior residency of a less superior species changes the outcome of refuge competition in its favor. The morphological specialization of A. balanorum and A. macrospilus is evident in a high correlation between head size and standard length. A. balanorum selects refuges with entrance diameters highly correlated to standard length.     

Mapping sediment acoustic impedance using remote sensing acoustic techniques in a shallow-water carbonate environment

 Real-time trackline plots of surficial sediment acoustic impedance delineate several sedimentary facies off Garden Key in the Dry Tortugas. The sea floor within a 6×6 km surveyed area consists of carbonate muds (silts), sands and shell, rock, and live corals. The 4-kHz acoustic data supports this finding by providing a pictographic representation of the distribution and structure of several sediment facies types. Plotting the gridded acoustic data with commercial mapping software (Surfer) provides a three-dimensional (3D) perspective of the bottom topography with a color contour map of surficial sediment impedance (upper 0.4 m) draped over the 3D surface.     

A simple shaker table for seismometer calibration

A unique and simple shaker table (shake table or shaking table), designed, constructed, and installed at the Hawaii Institute of Geophysics, has proven to be a valuable aid in testing and calibrating short period seismometers, as well as ocean bottom and ocean sub-bottom seismometer/tilt meter packages. It consists of a platform suspended in a stairwell by a single elastic cord (10 m extended length) driven by GeoSpace HS-10 geophones. Platform motion is monitored by orthogonal reference geophones and tilt meters. The relatively low natural periods of the platform, about 1.9 sec vertical and 6.5 sec horizontal, provide sufficient isolation from local vibrations that calibration can be made near operational amplitudes. Vertical or horizontal driver geophones can be driven by a commercial signal generator or white noise generator, or from magnetic tape output. The table can also be tilted with respect to the drivers to determine tilt tolerances and to calibrate tilt meters. A Hewlett-Packard 3582-A spectrum analyzer, used to analyze both reference and output signals, provides near real-time system cabibration and is an efficient means for investigating parasitic system resonances. The analyzer can also provide a white noise signal source to the driver geophones.Hawaii Institute of Geophysics Contribution 1443.     

Algorithm for non-hydrostatic dynamics in the Regional Oceanic Modeling System

A non-hydrostatic algorithm for the Regional Oceanic Modeling System (ROMS) is proposed. It is based on a decomposition technique for hydrostatic and non-hydrostatic pressure. The algorithm has a pressure-correction scheme with split-explicit time-stepping for baroclinic and barotropic vertical modes with a free surface. The algorithm implementation requires solving a Poisson equation for a non-hydrostatic pressure that has a non-symmetric matrix in discrete form. The efficiency of a different class of solvers and preconditioners were tested. The algorithm is successfully implemented with several examples where non-hydrostatic effects are important. These include standing external gravity waves; strongly nonlinear internal wave generation and transformation; stratified shear instability and its associated mixing; and nonlinear internal tidal generation over a ridge. The corresponding changes in the pre-processing and post-processing infrastructure in the existing hydrostatic ROMS code were performed to implement parallel elliptic solvers and a new set of dynamical equations.