Leaching of lead metallurgical slags and pollutant mobility far from equilibrium conditions

Lead metallurgical slags are partially vitrified materials containing residual amounts of Zn, Pb, Cr, Cd and As. These hazardous materials are generally buried on heaps exposed to weathering. In this study, leaching behavior of lead blast furnace slags has been tested using pure water and open flow experiments. It appears that in such far from equilibrium and slightly acidic conditions, the main phase to be altered is the vitreous phase. As for lunar, basaltic and nuclear glasses, alkalis/proton exchanges prevail and lead to the formation of a non-protective altered layer enriched in Si, Fe and Al. The composition of the altered layer is quite constant except for Si whose concentration decreases towards the leachate interface. Owing to their sizes, micrometric Pb droplets are not always totally dissolved at the slag surface. Nevertheless, nanometric Pb droplets are instantaneously dissolved while a surrounding altered layer is formed. This leads to high Pb releases in open flow systems. Leachate chemistry and dissolution rates of the vitreous phase are closely comparable to previous leaching tests with basaltic and nuclear glasses in conditions far from equilibrium. Moreover, this study confirms that Fe is a stable element in such conditions.     

Rice is a major exposure route for arsenic in Chakdaha block,Nadia district,West Bengal,India: A probabilistic risk assessment

The importance or otherwise of rice as an exposure pathway for As ingestion by people living in Bengal and other areas impacted by hazardous As-bearing groundwaters is currently a matter of some debate. Here this issue is addressed by determining the overall increased cancer risk due to ingestion of rice in an As-impacted district of West Bengal. Human target cancer health risks have been estimated through the intake of As-bearing rice by using combined field, laboratory and computational methods. Monte Carlo simulations were run following fitting of model probability curves to measured distributions of (i) As concentration in rice and drinking water and (ii) inorganic As content of rice and fitting distributions to published data on (i) ingestion rates and (ii) body weight and point estimates on bioconcentration factors, exposure duration and other input variables. The distribution of As in drinking water was found to be substantially lower than that reported by previous authors for As in tube wells in the same area, indicating that the use of tube well water as a proxy for drinking water is likely to result in human health risks being somewhat overestimated. The calculated median increased lifetime cancer risk due to cooked rice intake was 7.62 × 10⁻⁴, higher than the 10⁻⁴–10⁻⁶ range typically used by the USEPA as a threshold to guide determination of regulatory values and similar to the equivalent risk from water intake. The median total risk from combined rice and water intake was 1.48 × 10⁻³. The contributions to this median risk from drinking water, rice and cooking of rice were found to be 48%, 44% and 8%, respectively. Thus, rice is a major potential source of As exposure in the As-affected study areas in West Bengal and the most important exposure pathway for groups exposed to low or no As in drinking water.     

Radon transfer from groundwater used in showers to indoor air

Estimation of Rn transfer from water to indoor air based on multi-day measurements may underestimate alpha exposure that occurs at short time scales in confined spaces, such as from showering, in houses with high Rn activities in the water supply. In order to examine one such incremental increase in exposure, variations in Rn in water and indoor air in 18 houses with private wells in western North Carolina (USA) were investigated. Radon in well water ranged from 158 to 811 Bq L⁻¹ (median 239 Bq L⁻¹). After 20-min showers in bathrooms with closed doors, peak Rn in air increases (above background) ranged from 71 to 4420 Bq m⁻³ (median 1170 Bq m⁻³). Calculated transfer coefficients at the scale of a 40-min closed bathroom (20-min shower plus 20 min post-shower) are described by a lognormal distribution whose geometric mean exceeds the widely-used ∼10⁻⁴ whole-house transfer coefficient by about one order of magnitude. As short-lived decay products grow from shower-derived Rn, short-term alpha energy exposure occurs in bathrooms in addition to the exposure caused by Rn mixed throughout the volume of the house. Due to the increasing ratio of Rn decay products to Rn, alpha energy exposure is greatest several minutes after the shower is turned off. For a 7.2-min shower with 10 min of additional exposure before opening the door, a geometric mean 5.6% increase in exposure over the ∼10⁻⁴ whole-house transfer coefficient derived from longer measurement periods was estimated. In addition to Rn activity in water, short-term shower exposure to Rn progeny depends on exposure time, ventilation, attachment and deposition, among other variable factors that characterize individual houses and residents.     

Coupled hydrogeological and reactive transport modelling of the Simpevarp area (Sweden)

The Simpevarp area is one of the alternative sites being considered for the deep geological disposal of high level radioactive waste in Sweden. In this paper, a coupled regional groundwater flow and reactive solute transport model of the Simpevarp area is presented that integrates current hydrogeological and hydrochemical data of the area. The model simulates the current hydrochemical pattern of the groundwater system in the area. To that aim, a conceptual hydrochemical model was developed in order to represent the dominant chemical processes. Groundwater flow conditions were reproduced by taking into account fluid-density-dependent groundwater flow and regional hydrogeologic boundary conditions. Reactive solute transport calculations were performed on the basis of the velocity field so obtained. The model was calibrated and sensitivity analyses were carried out in order to investigate the effects of heterogeneities of hydraulic conductivity in the subsurface medium. Results provided by the reactive transport model are in good agreement with much of the measured hydrochemical data. This paper emphasizes the appropriateness of the use of reactive solute transport models when water-rock interaction reactions are involved, and demonstrates what powerful tools they are for the interpretation of hydrogeological and hydrochemical data from site geological repository characterization programs, by providing a qualitative framework for data analysis and testing of conceptual assumptions in a process-oriented approach.     

An operational multiscale system for hazards prediction, mapping, and response

By definition, a crisis is a situation that requires assistance to be managed. Hence, response to a crisis involves the merging of local and non-local emergency response personnel. In this situation, it is critical that each participant: (1) know the roles and responsibilities of each of the other participants; (2) know the capabilities of each of the participants; and (3) have a common basis for action. For many types of natural disasters, this entails having a common operational picture of the unfolding events, including detailed information on the weather, both current and forecasted, that may impact on either the emergency itself or on response activities. The Consequences Assessment Tool Set (CATS) is a comprehensive package of hazard prediction models and casualty and damage assessment tools that provides a linkage between a modeled or observed effect and the attendant consequences for populations, infrastructure, and resources, and, hence, provides the common operational picture for emergency response. The Operational Multiscale Environment model with Grid Adaptivity (OMEGA) is an atmospheric simulation system that links the latest methods in computational fluid dynamics and high-resolution gridding technologies with numerical weather prediction to provide specific weather analysis and forecast capability that can be merged into the geographic information system framework of CATS. This paper documents the problem of emergency response as an end-to-end system and presents the integrated CATS–OMEGA system as a prototype of such a system that has been used successfully in a number of different situations.     

含硫化物脉状矿床成矿流体的中阶段 δD亏损：实例与原因

很多含硫化物脉状金银矿床的成矿过程可以大致分为3个阶段,从早到晚分别以形成黄铁矿-石英组合、多金属硫化物和碳酸盐网脉为标志.所谓中阶段δD亏损,是指在成矿流体δ18O逐渐降低(或升高)时,中阶段δD同时低于早阶段和晚阶段的δD.列举了一些矿床的氢氧同位素研究结果,例证了这种现象的存在;根据中阶段伴随大量硫化物沉淀的事实,认为硫化物沉淀时流体中H2S或HS-的H 被金属离子置换出来,H 加入到流体系统后导致了流体的中阶段δD亏损.对不同温度H2O-H2S体系1000In ot值的概算显示,在200-650℃温度范围,H2S或HS-的δD低于H2O的δD约211‰～478%‰,H2S或HS-中H 的少量释放即可导致流体水δD的显著降低.因此建议,成矿流体从早到晚δ18O逐渐降低,中阶段δD亏损的规律,可以作为含硫化物脉状矿床氢氧同位素演化的概念性模型.     

储量计算与勘探线剖面计算机辅助成图一体化

引入关系教据库和GIS自动编图技术,改进传统的垂直断面法储量计算过程,可实现矿山储量计算和勘探线剖面计算机辅助成图的同步和一体化.在共用的矿山地矿信息点源数据库平台基础上.通过设置本地数据库,形成GIS操作时的外挂属性库,用来保存储量计算和机助成图过程中的动态数据.储量计算中的每一步骤中,用户以GIS为操作界面来同步实现对空间图元和外挂属性的操作,这其中对工程样段组合、矿体边界圈连和剖面制图综合等开发了大量自动化辅助功能.储量计算的各步完成后,勘探线剖面图和储量报表即同步生成.这种改进的工作方式实现了垂直断面法全过程的计算机辅助化,将提高这一传统方法的应用效率.     

个旧矿区遥感异常信息解译及找矿远景分析

文章以TM多光谱遥感数据为基本信息源,从实际地质情况出发,采用计算机识别和人工判读相结合,对区内的线形、环形构造进行了解译.应用比值 主成分分析的方法对区内热液弱蚀变信息进行了提取.在此基础上,综合利用已知矿床的分布以及遥感构造信息、遥感蚀变晕信息,结合已有的物化探资料,分析出4个找矿远景区.     

桃山铀矿田桃山断裂及其保矿作用

桃山铀矿田位于江西省中部,断裂构造发育,既有成矿构造,也有保矿构造,其中斜贯桃山矿田的桃山断裂即是一保矿构造,它形成于车免近时期,走向北东,倾向南东,右行正断,并具铰链断层性质,上盘地块掀斜下落,致使上盘成矿壳层向NW和NE倾斜,由于倾末端的侵蚀深度较小,保矿条件较好,加强这些地带的铀矿勘查和评价具有重要意义。