Results from microseismic monitoring,conventional instrumentation,and tomography surveys in the creation and thinning of a burst-prone sill pillar

Located in northern Québec, the Lac Shortt Mine was a small gold mine consisting of a thin subvertical orebody which was mined in three main phases. High stress and rockbursting conditions were experienced when ore was extracted in the upper zone between the surface and a depth of 500 metres during the first two phases of mining. Severe rockbursts were experienced in late 1989 near the shaft and in the footwall development following a deepening of the mine shaft to a depth of 830 m and partial development of footwall drift access for the third phase of mining (the mining of the lower zone starting at a depth of 830 m moving upward toward a depth of 500 m). A 16-channel Electrolab MP250 microseismic system, with a Queen's University Full-Waveform piggy-back system, was installed underground at the site due to these problems.It was expected that the thinning sill would be subjected to an ever-increasing load as the thickness of the 500 m sill pillar decreased in the face of the mining excavation from below. A monitoring program consisting of the microseismic monitoring system, a range of conventional geomechanics monitoring tools as well as the undertaking of periodic seismic tomography surveys to assess the ongoing state of stress and rock mass condition within the sill was therefore warranted.The anomalously high-magnitude stress field and the brittle rockmass created a situation in which rockmass failure was common and violent. In the creation and thinning of the sill pillar, the location of banded microseismic activity was crucial in tracing rockmass failure and the associated ground control problems. Reliable source-location determination enabled the identification of areas of stress increase. The movement of the rockmass failure front could be followed, and was responsible for stope dilution, footwall and orebody development deterioration, and caving.Source-mechanism analyses gave accurate double-couple solutions for approximately forty percent of these events having at least ten recognizable polarities. Results suggested movement along vertical north-south striking or vertical east-west striking features. Underground observation of damaged access points showed that vertical north-south striking joints were experiencing failure.The microseismic activity, which was consistently concentrated close to the southwest and northeast corners of current production stopes, could be explained by a stress field oriented obliquely to the strike of the orebody, as measured prior to shrinkage of the sill pillar byin situ stress measurements and observed borehole overbreaks. The orientations of theP andT axes for the microseismic activity further confirmed that the stress field oriented obliquely to strike.While an increase in compressional-wave velocity of 2.3 percent, corresponding to a measured stress increase of approximately 10 MPa could be measured by repeated tomographic surveys, it was relatively small and only a factor of two or so above the velocity measured uncertainty. The relative insensitivity of thein situ rock mass modulus to the applied stress is believed to be largely due to the rockmass discontinuities being relatively closed prior to stress increase, as substantiated by the small deformations seen by the extensometer and borehole camera. This situation existed because of the very high pre-mining stress level.The experimental demonstration that the rock could not absorb substantially increased load through the mechanism of discontinuity closure or tightening (which would be reflected in the modulus) may be evidence in itself of potentially burst-prone ground, such as encountered at Lac Shortt.     

Stakeholder Perceptions of Coastal Habitat Ecosystem Services

The goal of the current study was to document local stakeholder perceptions of ecosystem services provided by coastal habitats and to incorporate values of ecosystem services into an ecosystem-based management plan. A second goal was to identify and quantify ecosystem service supply at the local level, which is a knowledge gap identified by the Millennium Ecosystem Assessment. Ecosystem services were quantified as stakeholder perceptions of values. To identify local stakeholder perceptions of coastal habitat ecosystem services, a workshop was conducted at which stakeholders were asked to complete surveys. Data from the surveys were used to create a spatial representation of the number of ecosystem services provided by habitats in the form of a heat map. Results of the study were incorporated into an ecosystem-based management plan to enable stakeholders and managers to make better-informed decisions regarding priority areas for conservation, preservation, and restoration. The methods used in this study can be expanded to develop future ecosystem-based management plans.     

Neo-Atlantis: The Netherlands under a 5-m sea level rise

What could happen to the Netherlands if, in 2030, the sea level starts to rise and eventually, after 100 years, a sea level of 5 m above current level would be reached? This question is addressed by studying literature, by interviewing experts in widely differing fields, and by holding an expert workshop on this question. Although most experts believe that geomorphology and current engineering skills would enable the country to largely maintain its territorial integrity, there are reasons to assume that this is not likely to happen. Social processes that precede important political decisions – such as the growth of the belief in the reality of sea level rise and the framing of such decisions in a proper political context (policy window) – evolve slowly. A flood disaster would speed up the decision-making process. The shared opinion of the experts surveyed is that eventually part of the Netherlands would be abandoned.     

Delayed accumulation of placers during exhumation of orogenic gold in southern New Zealand

The giant gold placer system on the Otago Schist of southern New Zealand was derived from Mesozoic orogenic gold deposits in the underlying schist basement. The core of the schist basement was exhumed in the middle Cretaceous, coeval with the accumulation of the oldest preserved nonmarine sedimentary rocks in the area (ca 112 Ma). Those sedimentary rocks contain quartz clasts, with distinctive ductile deformation textures, that were derived from structural zones in, or adjacent to, major orogenic gold deposits. Quartz textures in these structural zones are readily distinguishable from the rest of the schist belt, and hence provide a fingerprint for erosion of gold. The earliest sedimentary rocks on the margins of the gold-bearing schist belt are immature, and were derived from unoxidised outcrops in areas of high relief. Gold was not liberated from unoxidised basement rocks during erosion, and was removed from the system without placer concentration. Placer concentration did not begin until about 20 million years later, when oxidative alteration of gold deposits had facilitated gold grain size enhancement from micron scale (primary) to millimetre scale (secondary). Subsequent erosion and recycling of gold in the early Cenozoic, and again in the late Cenozoic, caused additional concentration of gold in progressively younger deposits. The Klondike giant placer goldfield of Canada had a similar geological history to the Otago placer field, and Klondike placer accumulation occurred in the late Cenozoic, at least 70 million years after Mesozoic exhumation of orogenic gold. The giant placer deposit on the western slopes of the Sierra Nevada in California occurs in Eocene and younger sedimentary rocks, at least 40 million years younger than the timing of major exhumation of the source rocks. Circum-Pacific giant gold placers formed under entirely different tectonic regimes from the emplacement of their source orogenic deposits, and these giant placer deposits do not form in foreland basins associated with convergent orogens. Formation of giant placers requires less active erosion and more subdued topography than the collisional orogenic activity that accompanied emplacement of source gold deposits in basement rocks, as well as oxidative alteration of the primary deposits to liberate gold from sulfide minerals and enhance secondary gold grain size.     

Oxidation state of the lithospheric mantle beneath Diavik diamond mine, central Slave craton, NWT, Canada

Oxygen fugacity (fO₂) conditions were determined for 29 peridotite xenoliths from the A154-North and A154-South kimberlites of the Diavik diamond mine using the newly developed flank method modified specifically for measuring Fe³⁺ in mantle-derived pyropic garnets. The results indicate that the garnet-bearing lithospheric mantle beneath the central Slave craton is vertically layered with respect to oxidation state. The shallow (<140 km), “ultra-depleted” layer is the most oxidized section of garnet-bearing subcratonic mantle thus far measured, up to one log unit more oxidizing relative to the FMQ buffer [Δlog fO₂ (FMQ) + 1]. The lower, more fertile layer has fO₂ conditions that extend down to Δlog fO₂ (FMQ) − 3.8, consistent with xenolith suites from other localities worldwide. Based on trace element concentrations in garnets, two distinct metasomatic events affected the mantle lithosphere at Diavik. An oxidized fluid imparted sinusoidal chondrite-normalized REE patterns on garnets throughout the entire depth range sampled. In contrast, a reducing melt metasomatic event affected only the lower portion of the lithospheric mantle. The fO₂ state of the Diavik mantle sample suggests that diamond formation occurred by reduction of carbonate by fluids arising from beneath the lithosphere.     

Time evolution of the mineralogical composition of Mississippi Valley loess over the last 10 kyr: Climate and geochemical modeling

Anthropogenic and natural climate change affect processes in the atmosphere, biosphere, hydrosphere, and pedosphere. The impact of climate on soil evolution has not been well-explored, largely due to slow rates and the complexity of coupled processes that must be observed and simulated. The rates of mineral weathering in loess deposited 23 kyr ago and experiencing soil formation for 13 kyr are explored here using the WITCH model for weathering and the GENESIS model for climate simulation. The WITCH model, which uses rigorous kinetic parameters and laws with provision for the effect on rates of deviation from equilibrium, can successfully simulate the depletion profiles in the soil for dolomite and albite if soil CO₂ is assumed to rise over the last 10 kyr up to about 30-40× the present atmospheric pressure, and if the solubility product of the Ca-smectite is assumed equal to that of an Fe(III)-rich Ca-montmorillonite. Such simulations document that dissolution behavior for silicates and carbonates are strongly coupled through pH, and for Ca-smectite and feldspars through dissolved silica. Such coupling is not incorporated in simple geometric and analytical models describing mineral dissolution, and therefore probably contributes to the long-standing observation of discrepancies among laboratory and field mineral dissolution rates.