Seismic hazard monitoring in Kamchatka and its applications to the M = 6.6 earthquake of 6 October 1987

The earthquake of 6 October 1987 (M = 6.6), which occurred near the Shipunsky Cape, Kamchatka, was the largest crustal event in the vicinity of the main city of Kamchatka — Petropavlovsk-Kamchatsky — during the last three decades. It was followed by numerous aftershocks. This earthquake allowed us to test the effectiveness of the seismic hazard monitoring in Kamchatka, including the seismological, geodetic and hydrogeochemical surveys. The seismic survey provided the location and source nature of the main shock and aftershocks and the seismic environment of the main shock. The geodetic and hydrogeochemical surveys have yielded data on the response to earthquakes of the Earth's surface deformations, water level, and chemical elements concentration in the underground water. As a result, the following data were obtained:

u

The earthquake of 6 October had a seismic moment 4–10 E18 Nm, thrust type of faulting and the source volume of 20 × 20 × 10 km³. The maximum intensity was VI–VII (MSK-64 scale) and maximum acceleration 88 cm/s².

Before this event, a relative increase in the number of the upper mantle (depth more than 100 km) moderate magnitude earthquakes during 5 years and a one-year period of seismic quiescence for small shallow earthquakes, were recognized. Significant anomalies in HCO₃ and H₃BO₃ concentrations in the underground waters were observed in the wells a week before the main shock.

     

Sedimentation on the Ionian active margin (Hellenic arc) — Provenance of sediments and mechanisms of deposition

Lithological, sedimentological, mineralogical and faunal analyses of twenty cores from the western Peloponnesus margin and adjacent Matapan Trench permit the origin of the sediments and the processes of sedimentation to be defined in some detail.Except for the ash layers derived from the Ischian Province, the major part of the sediment is local in origin (Peloponnesus). Analyses of heavy, light and clay minerals enable three main provinces to be distinguished. Each of these provinces includes one or more slope basins and a portion of trench, without lateral connection between them and mixing of inputs.The diversity and complexity of sedimentary structures, the granulometric characters, the mixed fauna (molluscs and ostracods) and the variability of rates of sedimentation all testify to the prevalence of reworking phenomena and gravitative processes.These data confirm and elaborate on the model of sedimentation deduced from seismic studies in which sediments are successively trapped, released by the slope basins and transferred via channels and canyons towards the underlying trench basins. This “cascade feeding” appears characteristics of this subductive sedimentary environment.     

Boreal forest transmissivity in the microwave domain using ground-based measurements

This letter proposes an estimation of microwave transmissivity within the Canadian boreal forest. The aim is to correct the forest effect in snow water equivalent estimation from Special Sensor Microwave Imager and Advanced Microwave Scanning Radiometer microwave measurements. The estimation was carried out using ground-based radiometric measurements, at 19 and 37 GHz, and for both polarizations. The results show that the transmissivity is correlated with the stem volume and is independent of the tree species. For high stem volumes (>100 m/sup 3//ha), the transmissivity is found to be 0.4 and 0.3 for 19 and 37 GHz, respectively.     

PHOTOGRAMMETRIC DATA CAPTURE: AN INEXPENSIVE ALTERNATIVE

A case is made for the development of an inexpensive and portable data capturing unit which could be used with existing mirror stereoscopes and which could provide an accuracy sufficient for most digital map databases. The results of simulation experiments to test the accuracy of the system are presented.     

Response of GPS occultation signals to atmospheric gravity waves and retrieval of gravity wave parameters

We show that the amplitude of the Global Positioning System (GPS) signals in the radio occultation (RO) experiments is an indicator of the activity of the gravity waves (GW) in the atmosphere. The amplitude of the GPS RO signals is more sensitive to the atmospheric wave structures than is the phase. Early investigations used only the phase of the GPS occultation signals for statistical investigation of the GW activity in the height interval 10–40 km on a global scale. In this study, we use the polarization equations and Hilbert transform to find the 1-D GW radio image in the atmosphere by analyzing the amplitude of the RO signal. The radio image, also called the GW portrait, consists of the phase and amplitude of the GW as functions of height. We demonstrate the potential of this method using the amplitude data from GPS/Meteorology (GPS/MET) and satellite mission Challenge Mini-satellite Payload (CHAMP) RO events. The GW activity is nonuniformly distributed with the main contribution associated with the tropopause and the secondary maximums related to the GW breaking regions. Using our method we find the vertical profiles of the horizontal wind perturbations and its vertical gradient associated with the GW influence. The estimated values of the horizontal wind perturbations are in fairly good agreement with radiosonde data. The horizontal wind perturbations v(h) are ±1 to ±5 m s with vertical gradients dv/dh ±0.5 to ±15 m s km at height 10–40 km. The height dependence of the GW vertical wavelength was inferred through the differentiation of the GW phase. Analysis of this dependence using the dispersion relationship for the GW gives the estimation of the projection of the horizontal background wind velocity on the direction of the GW propagation. For the event considered, the magnitude of this projection changes between 1.5 and 10 m s at heights of 10–40 km. We conclude that the amplitude of the GPS occultation signals contain important information about the wave processes in the atmosphere on a global scale.     

Bayesian algorithm for the estimation of the dielectric constant from active and passive remotely sensed data

An inversion technique based on the merging of microwave remotely sensed data is applied to ground-based radiometer and scatterometer data acquired for the same area. The purpose of this technique is to retrieve the dielectric constant of bare soils. The algorithm is based on a Bayesian approach and combines prior information on the dielectric constant and surface roughness with observed data, in order to obtain a marginal posterior probability density function. The function describes how the probability is distributed within the range of the dielectric constant values, given the measured values of emissivity and backscattering coefficient. The algorithm allows for the incorporation of all the available sources of information, such as multipolarization and multifrequency data. Several criteria, which have been used to compare the predicted and the observed values, show that for dielectric constant values higher than 10 the best performance is achieved when data with one polarization and one or two frequencies are exploited. For dielectric constant values of less than 10, the configuration with two polarizations produces the best estimates.     

A model for adjustment of differential gravity measurements with simultaneous gravimeter calibration

 A mathematical model is proposed for adjustment of differential or relative gravity measurements, involving simultaneously instrumental readings, coefficients of the calibration function, and gravity values of selected base stations. Tests were performed with LaCoste and Romberg model G gravimeter measurements for a set of base stations located along a north–south line with 1750 mGal gravity range. This line was linked to nine control stations, where absolute gravity values had been determined by the free-fall method, with an accuracy better than 10 μGal. The model shows good consistence and stability. Results show the possibility of improving the calibration functions of gravimeters, as well as a better estimation of the gravity values, due to the flexibility admitted to the values of the calibration coefficients. Received: 15 November 1999 / Accepted: 31 October 2000     

Neutron stars in the multidimensional einstein theory of gravitation

The radius, mass, total number of baryons, and other parameters of static, spherically symmetric, superdense stars are calculated. A model with one Ricci-flat inner space of arbitrary dimensionality and the approximation p₁=?0.5ε + ap for additional components of the energy — momentum tensor are used (ε and ρ are the total energy density and the pressure of the stellar matter and a is a fitting parameter). In the case of white dwarfs, the results of the multidimensional theory do not depend on the dimensionality D of space-time for ?10 ? a ? 10 and coincide with the analogous data of the general theory of relativity (GTR). For neutron stars there is a dependence on D and a. For D>4, in particular, the greatest mass M_max of a neutron star as a function of a has a maximum at 3<a(D) ? 4, which exceeds the greatest mass M _max ⁰ =2.14 M_⊙ in the GTR. A comparison of theoretical results with observational data determines the allowable values of a. Data for PSR 1913 + 16 lead to 0.2 ≤ a ≤ 9.2 in the case of D=26, while the results of [P. C. Joss and S. A. Rappaport, Annu. Rev. Astron. Astrophys.,22, 537 (1984)] lead to the stricter limits 1 ≤ a ≤ 7.4.     

Martian water vapor: Mars Express PFS/LW observations

We present the seasonal and geographical variations of the martian water vapor monitored from the Planetary Fourier Spectrometer Long Wavelength Channel aboard the Mars Express spacecraft. Our dataset covers one martian year (end of Mars Year 26, Mars Year 27), but the seasonal coverage is far from complete. The seasonal and latitudinal behavior of the water vapor is globally consistent with previous datasets, Viking Orbiter Mars Atmospheric Water Detectors (MAWD) and Mars Global Surveyor Thermal Emission Spectrometer (MGS/TES), and with simultaneous results obtained from other Mars Express instruments, OMEGA and SPICAM. However, our absolute water columns are lower and higher by a factor of 1.5 than the values obtained by TES and SPICAM, respectively. In particular, we retrieve a Northern midsummer maximum of 60 pr-μm, lower than the 100-pr-μm observed by TES. The geographical distribution of water exhibits two local maxima at low latitudes, located over Tharsis and Arabia. Global Climate Model (GCM) simulations suggest that these local enhancements are controlled by atmospheric dynamics. During Northern spring, we observe a bulge of water vapor over the seasonal polar cap edge, consistent with the northward transport of water from the retreating seasonal cap to the permanent polar cap. In terms of vertical distribution, we find that the water volume mixing ratio over the large volcanos remains constant with the surface altitude within a factor of two. However, on the whole dataset we find that the water column, normalized to a fixed pressure, is anti-correlated with the surface pressure, indicating a vertical distribution intermediate between control by atmospheric saturation and confinement to a surface layer. This anti-correlation is not reproduced by GCM simulations of the water cycle, which do not include exchange between atmospheric and subsurface water. This situation suggests a possible role for regolith-atmosphere exchange in the martian water cycle.     

Acid mine drainage at Cerro Rico de Potosí I: unabated high-strength discharges reflect a five century legacy of mining

Intensive mining and processing of Ag, Sn, Pb and Zn ores have occurred in various locations within and around the city of Potosí, Bolivia since 1545. Surface and subsurface waters, stream sediments and soils are contaminated with various ecotoxic metals in the headwaters of the economically vital, yet highly impacted, upper Rio Pilcomayo watershed. Previous studies have documented downstream trace metal contamination, however, not addressed specific sources. The AMD discharges identified in this study help link downstream pollution to primary origins. The majority of AMD would be considered high-strength due to metal concentrations and acidity orders of magnitude greater than typical AMD. Discharges from both operating and abandoned portals as well as tailings-related deposits displayed a high degree of heterogeneity with total metal concentrations ranging from 0.11 to 7480, <0.022 to 889, <0.0006 to 65.3, <0.001 to 310, 0.12 to 72,100, 0.3 to 402, <0.012 to 34.8, and 0.24 to 19,600 mg/L of Al, As, Cd, Cu, Fe, Mn, Pb and Zn, respectively. Net acidity and pH ranged from −10 to 246,000 mg/L as CaCO₃ equivalent and 0.90–6.94 standard units, respectively. Data were gathered during two sampling events centered around the most extreme periods of the dry and wet seasons of one water-year. Loadings to local streams were marginally greater for most metals in the wet season. If observed loadings are historically representative, Cerro Rico AMD has contributed thousands of tonnes of ecotoxic metals to the upper Rio Pilcomayo over the last five centuries. Metal and hydrogen ion concentrations in the majority of AMD sampled were several orders of magnitude above discharge limits set by the Bolivian government, yet no action has historically or contemporarily been taken.