Columnar jointing in vapor-phase-altered,non-welded Cerro Galán Ignimbrite,Paycuqui, Argentina

Columnar jointing is thought to occur primarily in lavas and welded pyroclastic flow deposits. However, the non-welded Cerro Galán Ignimbrite at Paycuqui, Argentina, contains well-developed columnar joints that are instead due to high-temperature vapor-phase alteration of the deposit, where devitrification and vapor-phase crystallization have increased the density and cohesion of the upper half of the section. Thermal remanent magnetization analyses of entrained lithic clasts indicate high emplacement temperatures, above 630°C, but the lack of welding textures indicates temperatures below the glass transition temperature. In order to remain below the glass transition at 630°C, the minimum cooling rate prior to deposition was 3.0 × 10⁻³–8.5 × 10⁻²°C/min (depending on the experimental data used for comparison). Alternatively, if the deposit was emplaced above the glass transition temperature, conductive cooling alone was insufficient to prevent welding. Crack patterns (average, 4.5 sides to each polygon) and column diameters (average, 75 cm) are consistent with relatively rapid cooling, where advective heat loss due to vapor fluxing increases cooling over simple conductive heat transfer. The presence of regularly spaced, complex radiating joint patterns is consistent with fumarolic gas rise, where volatiles originated in the valley-confined drainage system below. Joint spacing is a proxy for cooling rates and is controlled by depositional thickness/valley width. We suggest that the formation of joints in high-temperature, non-welded deposits is aided by the presence of underlying external water, where vapor transfer causes crystallization in pore spaces, densifies the deposit, and helps prevent welding.     

Net autotrophy in a fluvial lake: the relative role of phytoplankton and floating-leaved macrophytes

This study combined water- and sediment flux measurements with mass balances of dissolved gas and inorganic matter to determine the importance of pelagic and benthic processes for whole-system metabolism in a eutrophic fluvial lake. Mass balances of dissolved O₂, inorganic carbon (DIC), nitrogen (DIN), phosphorous (SRP), particulate N (PN) and P (PP) and Chl a were calculated at a nearly monthly frequency by means of repeated sampling at the lake inlet and outlet. Simultaneously, benthic fluxes of gas and nutrients, including denitrification rates, and the biomass of the dominant pleustophyte (Trapa natans) were measured, and fluxes of O₂ and CO₂ across the water–atmosphere interface were estimated from diel changes in outlet concentrations. On an annual scale, Middle Lake exhibited CO₂ supersaturation, averaging 313% (range 86–562%), but was autotrophic with a net O₂ production (6.35 ± 2.05 mol m⁻² y⁻¹), DIC consumption (−31.18 ± 18.77 mol m⁻² y⁻¹) and net export of Chl a downstream (8.38 ± 0.95 mol C m⁻² y⁻¹). Phytoplankton was the main driver of Middle Lake metabolism, with a net primary production estimated at 33.24 mol O₂ m⁻² y⁻¹, corresponding to a sequestration of 4.18 and 0.26 mol m⁻² y⁻¹ of N and P, respectively. At peak biomass, T. natans covered about 18% of Middle Lake’s surface and fixed 2.46, 0.17 and 0.02 mol m⁻² of C, N and P, respectively. Surficial sediments were a sink for O₂ (−14.47 ± 0.65 mol O₂ m⁻² y⁻¹) and a source of DIC and NH₄ ⁺ (18.84 ± 2.80 mol DIC m⁻² y⁻¹ and 0.83 ± 0.16 mol NH₄ ⁺ m⁻² y⁻¹), and dissipated nitrate via denitrification (1.44 ± 0.11 mol NO₃ ⁻ m⁻² y⁻¹). Overall, nutrient uptake by primary producers and regeneration from sediments were a minor fraction of external loads. This work suggests that the creation of fluvial lakes can produce net autotrophic systems, with elevated rates of phytoplanktonic primary production, largely sustained by allochtonous nutrient inputs. These hypereutrophic aquatic bodies are net C sinks, although they simultaneously release CO₂ to the atmosphere.     

Distribution of n-alkanes in lacustrine sediments from subtropical lake in Brazil

The geochemical composition of lake bed sediments of a tropical reservoir in Brazil have been investigated. The C, N, P composition showed almost no variation between the different sampling points. All samples contained inorganic phosphorus (IP) ranging from 52 to 70%. The Redfield ratios show that the lake is without significant anthropogenic inputs. Most of the organic matter is composed by higher plants decomposition revealed in the total organic carbon (TOC):nitrogen (N) ratio ranging from 15.4 to 57.2. Also, TOC:organic phosphorus (OP) ranged from 265.3 to 933.6, suggesting that most of the organic matter has terrestrial origin from wood plants. The ratios suggest that most organic matter is influenced by the terrestrial characteristics of the watershed. Furthermore, the relative abundance of n-alkane homologues in the sediments was investigated. All samples have been analyzed for the n-alkanes C₈ to C₄₀. The sediments were dominated by n-alkanes C₂₅–C₃₈. It is concluded that n-alkane in sediments mainly come from terrestrial plants, however there is a contribution of submerged aquatic plants, especially in those sites in deeper areas of the lake. On the basis of P_aq index the n-alkanes in sediments comes from terrestrial plants, however there is a contribution from emerged/floating plants.The investigated lake seems to be considered as meso to eutrophic. Because of the relatively high primary productivity in the lakes, there is a substantial organic-matter flux to the sediments, which rapidly becomes anoxic. According to the pristine/phytane ratio the sediments represent an anoxic environment with values found between 0.38 and 1.72.     

High-temperature vesuvianite: crystal chemistry and surface considerations

A multi-methodical approach has been applied for characterizing the bulk and surface crystal chemical features of a high-temperature vesuvianite crystal from skarns of Mount Somma-Vesuvius Volcano (Naples, Italy). Vesuvianite belongs to the space group P4/nnc with unit cell parameters a = 15.633(1) Å, c = 11.834(1) Å and chemical formula (Ca_18.858 Na_0.028 Ba_0.004 K_0.006 Sr_0.005 □_0.098)_19.000 (Al_8.813 Ti_0.037 Mg_2.954 Mn_0.008 Fe_0.114²⁺ Fe_1.375³⁺ Cr_0.008 B_0.202)_13.511 Si_18.000(O_0.261 F_0.940 OH_7.799)_9.000. Structure refinement, which converges at R = 0.0328, demonstrates a strong positional disorder down the fourfold axes, indicating that the Y1 site is split into two positions (Y1A and Y1B) alternatively occupied. However, because of X4 proximity to Y1B and Y1A, X4 cannot be occupied if Y1B or Y1A are. Overall Y1 occupancy (Y1A + Y1B) reaches approximately 0.5, as common in vesuvianite and occupancy of Y1B site is extremely limited. Moreover, T1 position, limitedly occupied, accommodates the excess of cations generally related to Y position. A small quantity (0.202 apfu) of boron is sited at the T2 site that, like T1, is poorly occupied. The determination of the amount of each element on the (100) vesuvianite surface, obtained through X-ray photoelectron spectroscopy high-resolution spectra in the region of the Si_2p, Al_2p, Mg_1s, and Ca_2p core levels, evidences that a greater amount of aluminum and a smaller amount of calcium characterize the surface with respect to the bulk. Although both of these features require further investigation, we may consider the Al increase can be related to preferential orientation of Al-rich sites on the (100) plane. Furthermore, the surface structure of vesuvianite suggests that Al, Ca, and Mg cations maintain coordination features at the surface similar to the bulk. Silica, however, while presenting fourfold coordination, shows also a [1]-fold small coordinated component at binding energy 99.85 eV, due to broken Si–O bonds at the surface. The presence of eight- and nine-coordinated Ca cations is suggested by a large XPS feature resulting from the merging of Ca_2p3/2 and Ca_2p1/2 peaks at 348.45 and 352.05 eV, respectively.     

Beyond water, beyond boundaries: spaces of water management in the Krishna river basin, South India

As demand and competition for water resources increase, the river basin has become the primary unit for water management and planning. While appealing in principle, practical implementation of river basin management and allocation has often been problematic. This paper examines the case of the Krishna basin in South India. It highlights that conflicts over basin water are embedded in a broad reality of planning and development where multiple scales of decisionmaking and non-water issues are at play. While this defines the river basin as a disputed "space of dependence", the river basin has yet to acquire a social reality. It is not yet a "space of engagement" in and for which multiple actors take actions. This explains the endurance of an interstate dispute over the sharing of the Krishna waters and sets limits to what can be achieved through further basin water allocation and adjudication mechanisms – tribunals – that are too narrowly defined. There is a need to extend the domain of negotiation from that of a single river basin to multiple scales and to non-water sectors. Institutional arrangements for basin management need to internalise the political spaces of the Indian polity: the states and the panchayats. This re-scaling process is more likely to shape the river basin as a space of engagement in which partial agreements can be iteratively renegotiated, and constitute a promising alternative to the current interstate stalemate.     

Re-testing the JET-X Flight Module No. 2 at the PANTER facility

The Joint European X-ray Telescope (JET-X) was the core instrument of the Russian Spectrum-X- γ space observatory. It consisted of two identical soft X-ray (0.3–10 keV) telescopes with focusing optical modules having a measured angular resolution of nearly 15 arcsec. Soon after the payload completion, the mission was cancelled and the two optical flight modules (FM) were brought to the Brera Astronomical Observatory where they had been manufactured. After 16 years of storage, we have utilized the JET-X FM2 to test at the PANTER X-ray facility a prototype of a novel X-ray polarimetric telescope, using a Gas Pixel Detector (GPD) with polarimetric capabilities in the focal plane of the FM2. The GPD was developed by a collaboration between INFN-Pisa and INAF-IAPS. In the first phase of the test campaign, we have re-tested the FM2 at PANTER to have an up-to-date characterization in terms of angular resolution and effective area, while in the second part of the test the GPD has been placed in the focal plane of the FM2. In this paper we report the results of the tests of the sole FM2, using an unpolarized X-ray source, comparing the results with the calibration done in 1996.     

The VLTI – A Status Report

The Very Large Telescope (VLT) Observatory on Cerro Paranal (2635 m) in Northern Chile is approaching completion. After the four 8-m Unit Telescopes (UT) individually saw first light in the last years, two of them were combined for the first time on October 30, 2001 to form a stellar interferometer, the VLT Interferometer. The combination in pairs of all four UTs was completed in September 2002. In this article, we will describe the subsystems of the VLTI and the planning for the following years. This revised version was published online in July 2006 with corrections to the Cover Date.     

Directional response of a reconstituted fine‐grained soil—Part I: experimental investigation

This paper discusses the results of a large experimental program designed to investigate in a systematic manner the main features of the incremental response of fine‐grained soils. The results are obtained from triaxial stress probing experiments carried out on a French silty clay (Beaucaire Marl). All the tests have been performed on reconstituted specimens, normally consolidated to an initial state which is either isotropic or anisotropic. In the interpretation of the experimental results, extensive use is made of the concept of strain response envelope. The response envelopes obtained for different stress increment magnitudes are remarkably consistent with each other and indicate an inelastic and irreversible material response, i.e. a strong dependence on the stress increment direction, also at relatively small strain levels. A companion paper (Int. J. Numer. Anal. Meth. Geomech., this issue, 2006) assesses the performance of some advanced constitutive models in reproducing the behaviour of reconstituted Beaucaire Marl as observed in this experimental program. Copyright © 2006 John Wiley & Sons, Ltd.     

Two-Way Orbits

This paper introduces a new set of compatible orbits called “Two-Way Orbits,” whose ground track path is a closed-loop trajectory that intersects at certain points with tangent intersections. The spacecraft passes over these tangent intersections once in a prograde mode and once in a retrograde mode. Motivations are found for the need to have simultaneous observations of the same target area in both Earth observation and reconnaissance systems. The general mathematical model to design a Two-Way Orbit is presented for the specific case where the tangent points are experienced at the orbit extremes, perigee and apogee. As for the general case, Two-Way Orbit conditions are formulated and numerically solved. Results show that, in general, Two-Way Orbits could be formed over any point on Earth. Since Two-Way Orbits use compatible orbits, the theory of Flower Constellations can be applied to them. Using these Two-Way Orbits, this paper also introduces the Two-Way Flower Constellations that have one spacecraft prograde and one retrograde passing simultaneously over the tangent intersection.     

6. Environmental Context

On Earth, the Archaean aeon lasted from 4.0 to 2.5 Ga; it corresponds to a relatively stable period. Compared with today, internal Earth heat production was several times greater resulting in high geothermal flux that induced the genesis of rocks such as komatiites and TTG suites, which are no more generated on Earth since 2.5 Ga. Similarly, the details of plate tectonic modalities (plate size, plate motion rate, plate thickness, tectonic style, irregular crustal growth, etc...) were different of modern plate tectonics. Both atmosphere and ocean compositions have been progressively modified and the greater heat production favoured the development of hydrothermalism and therefore created niches potentially favourable for the development of some forms of life. Catastrophic events such as giant meteorite falls or world-sized glaciations drastically and suddenly changed the environment of Earth surface, thus being able to strongly affect development of life. Even if specialists still debate about the age of the oldest indubitable fossil trace of life, Archaean can be considered as having been extremely favourable for life development and diversification.