Impact of loading displacements on SLR-derived parameters and on the consistency between GNSS and SLR results

Displacements of the Earth’s surface caused by tidal and non-tidal loading forces are relevant in high-precision space geodesy. Some of the corrections are recommended by the international scientific community to be applied at the observation level, e.g., ocean tidal loading (OTL) and atmospheric tidal loading (ATL). Non-tidal displacement corrections are in general recommended not to be applied in the products of the International Earth Rotation and Reference Systems Service, in particular atmospheric non-tidal loading (ANTL), oceanic and hydrological non-tidal corrections. We assess and compare the impact of OTL, ATL and ANTL on SLR-derived parameters by reprocessing 12 years of SLR data considering and ignoring individual corrections. We show that loading displacements have an influence not only on station long-term stability, but also on geocenter coordinates, Earth Rotation Parameters, and satellite orbits. Applying the loading corrections reduces the amplitudes of annual signals in the time series of geocenter and station coordinates. The general improvement of the SLR station 3D coordinate repeatability when applying OTL, ATL and ANTL corrections are 19.5 %, 0.2 % and 3.3 % respectively, w.r.t. the solutions without loading corrections. ANTL corrections play a crucial role in the combination of optical (SLR) and microwave (GNSS, VLBI, DORIS) space geodetic observation techniques, because of the so-called Blue-Sky effect: SLR measurements can be carried out only under cloudless sky conditions—typically during high air pressure conditions, when the Earth’s crust is deformed, whereas microwave observations are weather-independent. Thus, applying the loading corrections at the observation level improves SLR-derived products as well as the consistency with microwave-based results. We assess the Blue-Sky effect on SLR stations and the consistency improvement between GNSS and SLR solutions when ANTL corrections are included. The omission of ANTL corrections may lead to inconsistencies between SLR and GNSS solutions of up to 2.5 mm for inland stations. As a result, the estimated GNSS–SLR coordinate differences correspond better to the local ties at the co-located stations when applying ANTL corrections.     

Uncovering spatiotemporal micromobility patterns through the lens of space–time cubes and GIS tools

Journal of Geographical Systems - In the past ten years, cities have experienced a burst of micromobility services as they offer a flexible transport option that allows users to cover short trips...     

New Reference Materials and Assessment of Matrix Effects for SIMS Measurements of Oxygen Isotopes in Garnet

Accurate ion microprobe analysis of oxygen isotope ratios in garnet requires appropriate reference materials to correct for instrumental mass fractionation that partly depends on the garnet chemistry (matrix effect). The matrix effect correlated with grossular, spessartine and andradite components was characterised for the Cameca IMS 1280HR at the SwissSIMS laboratory based on sixteen reference garnet samples. The correlations fit a second‐degree polynomial with maximum bias of ca. 4‰, 2‰ and 8‰, respectively. While the grossular composition range 0–25% is adequately covered by available reference materials, there is a paucity of them for intermediate compositions. We characterise three new garnet reference materials GRS2, GRS‐JH2 and CAP02 with a grossular content of 88.3 ± 1.2% (2s), 83.3 ± 0.8% and 32.5 ± 3.0%, respectively. Their micro scale homogeneity in oxygen isotope composition was evaluated by multiple SIMS sessions. The reference δ¹⁸O value was determined by CO₂ laser fluorination (δ¹⁸O_LF). GRS2 has δ¹⁸O_LF = 8.01 ± 0.10‰ (2s) and repeatability within each SIMS session of 0.30–0.60‰ (2s), GRS‐JH2 has δ¹⁸O_LF = 18.70 ± 0.08‰ and repeatability of 0.24–0.42‰ and CAP02 has δ¹⁸O_LF = 4.64 ± 0.16‰ and repeatability of 0.40–0.46‰.     

Zircon formation during fluid circulation in eclogites (Monviso, Western Alps): implications for Zr and Hf budget in subduction zones

The zircons from an eclogite and an enclosed eclogite-facies vein from the Monviso ophiolite (Western Alps) display contrasting chemical and morphologic features and document different stages of the evolution of the ophiolite. The zircons from the eclogite show a typical magmatic zoning and are enriched in heavy rare earth elements (HREEs) over middle rare earth elements (MREEs) and have an accentuated negative Eu anomaly, which indicates that the grains co-crystallised with plagioclase. These magmatic zircons document the formation of oceanic crust at 163 ± 2 Ma. In contrast, zircons from the vein contain inclusions of garnet, omphacite, and rutile, which indicate that they crystallised under eclogite-facies conditions. The vein zircons have Th/U ratios < 0.09, lack Eu anomalies, and are only weakly enriched in HREE with respect to MREE. These features are consistent with a garnet-bearing, plagioclase-free, i.e., eclogite-facies paragenesis. Vein zircons yield an age of 45 ± 1 Ma, which is evidence for Eocene subduction-zone metamorphism of the Monviso ophiolite.In the vein, the apparent coexistence of zircon, omphacite, and garnet permits the determination of a set of trace element distribution coefficients among these minerals at high pressure. This set of partitioning can demonstrate chemical equilibrium among these phases in rocks that show less clear evidence of textural equilibrium. In addition, zircon age can now be linked to sensors of metamorphic pressure-temperature conditions. The presence of zircon and rutile in the vein is another example of high field strength element (HFSE) mobility over short distances in aqueous fluids at eclogite-facies conditions. However, the concentrations of Zr and Hf in the aqueous fluid are estimated to be at least a factor of 10 less than primitive mantle values.Mass balance calculations demonstrate that zircon hosts > 95% of the bulk Zr, 90% of Hf, and ∼25% of U in the vein. Zircon is a residual phase in subducted basalts and sediments up to temperatures of at least 800 to 900 °C. Therefore, residual zircon in subducted crust, together with rutile, control the HFSE in liberated subduction zone fluids/melts and might be partly responsible for negative Zr and Hf anomalies in subduction zone magmas.     

Crystal-chemistry of clinopyroxenes from potassic and ultrapotassic rocks in central Italy: implications on their genesis

The clinopyroxenes mentioned have been investigated by single crystal X-ray diffraction combined with electron microprobe analysis. The aim of this study was to characterize the crystal-chemical variations of clinopyroxenes in order to delineate the intracrystalline constraints which are characteristic of specific magmatic environments. Clinopyroxenes (cpx) crystallized from peralkaline ultrapotassic melt with kamafugitic and lamproitic affinities are characterized by high Si contents, which are insensitive to variations in silica abundance and silica saturation of the melt. The high Si occupancy in clinopyroxenes from kamafugitic magma is coupled to large M1 (i.e. Mg and Fe²⁺) and M2 (high Ca occupancy) sites, whereas in clinopyroxenes from magmas with lamproitic affinity, high Si content is combined with large M1 but small M2 sites. Clinopyroxenes from Romantype alkaline potassic and ultrapostassic rocks are characterized by an expanded tetrahedron (high ^IVA1 content) and small M1 site which is combined with small M2 polyhedron in clinopyroxenes from the potassic rocks and large M2 site in those from the ultrapotassic rocks.     

Use of immunofluorescence technique in cultured fibroblasts from Mediterranean cetaceans as new "in vitro" tool to investigate effects of environmental contaminants

The aim of the present study was to propose the immunofluorescence technique in cultured fibroblasts from Mediterranean cetaceans as a new "in vitro" tool to explore the susceptibility of these marine mammals to different xenobiotic compounds. The cell lines were cultured from integument biopsies of free-ranging and stranded cetaceans (dead within 12h). Using the indirect immunofluorescence assay, we detected endogenous proteins induced by different contaminants. Here we present the method used for qualitative and quantitative evaluation of cytochromes P450 (CYP1A1 and CYP2B) induced by some POPs (DDTs and PCBs) and emerging contaminants (PBDEs) in fibroblast cell cultures of striped dolphin (Stenella coeruleoalba) and bottlenose dolphin (Tursiops truncatus). Immunofluorescence was quantified with a specially designed Olympus macro, DetectIntZ. A major result was the possibility of using this "in vitro" assay to quantify induction of endogenous proteins.     

The influence of local topography for wind direction on Mars: two examples of dune fields in crater basins

In this work, we perform an analysis of large dark dunes within Moreux Crater and Herschel Crater on Mars using High Resolution Imaging Science Experiment (HiRISE) and Context Camera (CTX) data sets. These data allow us to conduct a detailed analysis of dune morphology and slip faces, concluding that the studied dune fields are influenced by topographically‐controlled complex wind directions. Our morphological analysis reveals that inside Moreux Crater in particular, the topographic setting dominates the wind flow direction, leading to the development of a sand transport pathway encircling the central peak of the crater. The dune fields in Herschel Crater are also affected by winds controlled by variable topography as suggested by the presence of complex dunes and dune fields. Our analysis indicate that the studied dune systems is not the result of paleo‐wind regimes. Furthermore, we perform thermal inertia measurements using thermal emission spectrometer (TES) data, which indicate that the studied dune fields consist of medium sand 250–500 µm in diameter. Copyright © 2012 John Wiley & Sons, Ltd.     

Europe adapts to climate change: Comparing National Adaptation Strategies

For the last two decades, European climate policy has focused almost exclusively on mitigation of climate change. It was only well after the turn of the century, with impacts of climate change increasingly being observed, that adaptation was added to the policy agenda and EU Member States started to develop National Adaptation Strategies (NASs). This paper reviews seven National Adaptation Strategies that were either formally adopted or under development by Member States at the end of 2008. The strategies are analysed under the following six themes. Firstly, the factors motivating and facilitating the development of a national adaptation strategy. Secondly, the scientific and technical support needed for the development and implementation of such a strategy. Thirdly, the role of the strategy in information, communication and awareness-raising of the adaptation issue. Fourthly, new or existing forms of multi-level governance to implement the proposed actions. Fifthly, how the strategy addresses integration and coordination with other policy domains. Finally, how the strategy suggests the implementation and how the strategy is evaluated. The paper notes that the role of National Adaptation Strategies in the wider governance of adaptation differs between countries but clearly benchmarks a new political commitment to adaptation at national policy levels. However, we also find that in most cases approaches for implementing and evaluating the strategies are yet to be defined. The paper concludes that even though the strategies show great resemblance in terms of topics, methods and approaches, there are many institutional challenges, including multi-level governance and policy integration issues, which can act as considerable barriers in future policy implementation.     

Magnetic data analysis at low latitudes using magnitude transforms

Magnitude transforms include magnitude magnetic anomalies (MMA), their gradients and Laplacians. They can be calculated from the total magnetic anomalies or other component anomalies. Magnitude magnetic anomalies have a space distribution different from that of the component anomalies. Their values are non‐negative and their respective patterns are similar to the positive gravity anomalies. Magnitude transforms are an effective tool for magnetic data analysis due to their simplified pattern and direct correlation with the space location of the source. They have advantages over the traditionally used reduction‐to‐the‐pole (RTP) transform, especially at low magnetic latitudes. The calculation of magnitudes of the anomalous field requires the total field data to be transformed into the component anomalies, while the reduction‐to‐the‐pole transform also includes a rotation of the magnetization vector, the orientation of which is usually assumed. For equal latitudes, the transfer functions of component‐component transforms in the frequency domain show better stability than the component‐component‐rotation transfer function. This is illustrated by a comparison of analytical expressions, and synthetic models of magnetic fields. The Dixon seamount case shows the possibilities for an improved data analysis and more confident source recognition at low latitudes using magnetic transforms.