Sm−Nd dating of multiple garnet growth events in an arc-continent collision zone,northwestern U.S. Cordillera

Integrated petrologic and Sm–Nd isotopic studies in garnet amphibolites along the Salmon River suture zone, western Idaho, delineate two periods of amphibolite grade metamorphism separated by at least 16 million years. In one amphibolite,P–T studies indicate a single stage of metamorphism with final equilibration at 600°C and 8–9 kbar. The Sm–Nd isotopic compositions of plagioclase, apatite, hornblende, and garnet define a precise, 8-point isochron of 128±3 Ma (MSWD=1.2) interpreted as mineral growth at the metamorphic peak. A⁴⁰Ar/³⁹Ar age for this hornblende indicates cooling through 525°C at 119±2 Ma. In a nearby amphibolite, garnets with a two-stage growth history consist of inclusion-rich cores surrounded by discontinuous, inclusion-free overgrowths. Temporal constraints for core and overgrowth development were derived from Sm–Nd garnet — whole rock pairs in which the garnet fractions consist of varying proportions of inclusion-free to inclusion-bearing fragments. Three garnet fractions with apparent ages of 144, 141, and 136 Ma are thought to represent mixtures between late Jurassic (pre-144 Ma) inherited radiogenic components preserved within garnet cores and early Cretaceous (128 Ma) garnet overgrowths. These observations confirm the resilience of garnet to diffusive exchange of trace elements during polymetamorphism at amphibolite facies conditions. Our geochronologic results show that metamorphism of arc-derived rocks in western Idaho was episodic and significantly older than in arc rocks along the eastern margin of the Wrangellian Superterrane in British Columbia and Alaska. The pre-144 Ma event may be an expression of the late Jurassic amalgamation of marginal oceanic arc-related terranes (e.g., Olds Ferry, Baker, Wallowa) during the initial phases of their collision with North American rocks. Peak metamorphism at 128 Ma reflects tectonic burial along the leading edge of the Wallowa arc terrane during its final penetration and suturing to cratonic North America.     

Infrared imaging and spectroscopy with arrays at the University of Montreal

The Montreal Infrared Camera (MONICA) consists of a LN₂ cryostat enclosing a NICMOS3 array, re-imaging optics and a filter wheel mechanism containing broad-band and circular variable filters. A polarimetry mode with a warm half wave plate and a cold polarizer/filter combination is also supported. At the CFHT 0.5 (FWHM) images are routinely obtained with limiting magnitudes of 22.8 at J and 21.7 at K (S/N=3 in 1hr).The Spectrometre Infrarouge de Montréal (SIMON) is a versatile grating spectrometer with spectral resolutions ranging from 300 to 5000. Presently under construction, this spectrometer will initially contain a 512×512 HgCdTe array. Use of reflective optics will allow a future upgrade to a similar format InSb array, extending the wavelength coverage to 5m. SIMON will also have an imaging mode to facilitate the centering of objects within interchangeable slits.     

4.8 – 20 μm Imaging of orion BN/KL: II. A new look at luminosity sources and the role of IRc2

We have reconsidered the energetics of the BN/KL infrared complex, using array images at nine wavelengths between 4.8 and 20 m, and find a much lower luminosity for IRc2 than the generally accepted value. The new observations resolve larcsec structure throughout the region, including several new compact sources within a few arcsec of IRc2 and significant details imaged in the 9.7 m silicate feature. Together with other recent work, the results suggest that luminous stars associated with three compact HII regions found within BN/KL, rather than IRc2, may be the more significant luminosity sources for the complex.     

Assessing streams in Germany with benthic invertebrates: Development of a multimetric invertebrate based assessment system

The main aim of the study was to develop a multimetric assessment system for macroinvertebrate communities of small and mid-sized streams in Germany in accordance with the Water Framework Directive of the European Union. The system should be applicable by water authorities, capable of distinguishing between different impacts, and specifically adapted to all types of small and mid-sized rivers in Germany. An assessment system has been developed consisting of two modules based on the established indices for saprobic degradation and acidity, and a third module covering general degradation. For the third module a new multimetric index (MMI) was developed and tested using preclassifications for stream hydromorphological degradation, land use and general impairment as impact measures. More information on sampling method, season and the type of dominating human impairment allowed to further analyse the index' capabilities and sensitivity. It performed well in all seasons and detected all types of impairment except acidity. The usefulness of the impact measures used in this study is discussed with regard to the development of a multimetric index. The comparison of the new index with other indices showed that it is especially sensitive in detecting macroinvertebrate community responses to hydromorphological degradation and pollution such as the German AQEM index, while IBI 12 and Renkonen's similarity more reflect general community shifts caused by any type of disturbance. The new assessment system will be proposed for future use by state agencies for nationwide monitoring in the context of the Water Framework Directive implementation.     

Shear modulus and damping ratio of grouted sand

An experimental comparative study of three different grouted sands in terms of their effects on the values of two dynamic properties is presented. The dynamic properties studied are the shear modulus and the damping ratio which are determined with resonant column tests and cyclic triaxial tests. The behaviour of a pure Fontainebleau sand is compared with the behaviour of a Fontainebleau sand grouted with a silicate grout, a micro-fine cement grout and a mineral grout. The effects of the grouting treatment, the type of grout, the confining pressure, and the strains, on the shear modulus and the damping ratio are studied. The test results have shown that grouting improves the stiffness of the sand especially for small strains. Whatever the type of material, confining stress improves the shear modulus whereas it has a negligible effect on the damping ratio. When strain increases, the shear modulus decreases and the damping ratio increases.     

Multivariate Analysis of Incomplete Mapped Data

Classical multivariate analyses are based on matrix algebra and enable the analysis of a table containing measurements of a set of variables for a set of sites. Incomplete mapped data consist of measurements of a set of variables recorded for the same geographical region but for different zonal systems and with only a partial sampling of this zone. This kind of data cannot be analysed with usual multivariate methods because there is no common system of sites for all variables. We propose a new approach using GIS technology and NIPALS, an iterative multivariate method, to analyse the spatial patterns of this kind of data. Moreover, an extension of our method is that it can be used for areal interpolation purposes. We illustrate the method in analysing data concerning the distribution of roe deer weights over several years in a reserve.     

The structure and sharpness of (Mg,Fe)2SiO4 phase transformations in the transition zone

To calculate accurately the pressure interval and mineral proportions (i.e. yields) across the olivine to wadsleyite and wadsleyite to ringwoodite transformations requires a detailed knowledge of the non-ideality of Fe-Mg mixing in these (Mg,Fe)₂SiO₄ solid solutions. In order to constrain the activity-composition relations that describe non-ideal mixing, Fe-Mg partitioning experiments have been conducted between magnesiowüstite and (Mg,Fe)₂SiO₄ olivine, wadsleyite and ringwoodite as a function of pressure at 1400°C. Using known activity-composition relations for magnesiowüstite the corresponding relations for the three polymorphs were determined from the partitioning data. In all experiments the presence of metallic iron ensured redox conditions compatible with the Earth’s transition zone. The non-ideality of the (Mg,Fe)₂SiO₄ solid solutions was found to decrease in the order W^wadsleyite_FeMg>W^ringwoodite_FeMg>W^olivine_FeMg. These partitioning data were used, along with published phase equilibria measurements for the Mg₂SiO₄ and Fe₂SiO₄ end-member transformations, to produce an internally consistent thermodynamic model for the Mg₂SiO₄-Fe₂SiO₄ system at 1400°C. Using this model the pressure interval of the olivine to wadsleyite transformation is calculated to be significantly smaller than previous determinations. By combining these results with Fe-Mg partitioning data for garnet, the widths of transition zone phase transformations in a peridotite composition were calculated. The olivine to wadsleyite transformation at 1400°C in dry peridotite was found to occur over a pressure interval equivalent to approximately 6 km depth and the mineral yields were found to vary almost linearly with depth across the transformation. This transformation is likely to be even sharper at higher temperatures or could be significantly broader in wet mantle or in regions with a significant vertical component of mantle flow. The entire range of estimated widths for the 410 km discontinuity (4-35 km) could, therefore, be explained by the olivine to wadsleyite transformation in a peridotite composition over a range of quite plausible mantle temperatures and H₂O contents. The wadsleyite to ringwoodite transformation in peridotite mantle was calculated to take place over an interval of 20 km at 1400°C. This transformation yield was also found to be near linear.     

Post-collisional transition from calc-alkaline to alkaline volcanism during the Neogene in Oranie (Algeria): magmatic expression of a slab breakoff

During the Neogene, a magmatic change from calc-alkaline to alkaline types occurred in all the regions surrounding the western Mediterranean. This change has been studied in Oranie (western Algeria). In this area, potassic to shoshonitic calc-alkaline andesites (with La/Nb ratios in the range 4–6) were mainly erupted between 12 and 9 Ma. They were followed (between 10 and 7 Ma) by basalts displaying geochemical features which are transitional between calc-alkaline and alkaline lavas (La/Nb=1–1.7). After a ca. 3-Ma quiescence period, volcanic activity resumed, with the eruption of OIB-type alkaline basalts (La/Nb=0.5–0.6), from 4 to 0.8 Ma. A combined geochemical approach, using incompatible elements and Sr, Nd and O isotopes, allows us to conclude that the transitional basalts derived from the melting of a heterogeneous mantle source, at the boundary between lithosphere and asthenosphere. We propose that melting of a previously subduction-modified lithospheric mantle occurred between 12 and 10 Ma, in response to the upwelling of hot asthenosphere flowing up into an opening gap above a detached sinking slab. As a result, calc-alkaline magmas were formed. From 10 to 7 Ma, the transitional basalts were generated through melting of the boundary mantle zone between the lithosphere and the upwelling asthenosphere. During that stage, the contribution of the lithospheric source was still predominant. Then, as sinking of the oceanic slab progressed, the increasing uprise of the asthenosphere led to the formation and emplacement (from 4 to 0.8 Ma) of typical within-plate alkaline basalts derived from a plume-modified asthenospheric mantle.