Comparative phylogeography of African rain forest trees: A review of genetic signatures of vegetation history in the Guineo-Congolian region

The biogeographic history of the African rain forests has been contentious. Phylogeography, the study of the geographic distribution of genetic lineages within species, can highlight the signatures of historical events affecting the demography and distribution of species (i.e. population fragmentation or size changes, range expansion/contraction) and, thereby, the ecosystems they belong to. The accumulation of recent data for African rain forests now enables a first biogeographic synthesis for the region. In this review, we explain which phylogeographic patterns are expected under different scenarios of past demographic change, and we give an overview of the patterns detected in African rain forest trees to discuss whether they support alternative hypotheses regarding the history of the African rain forest cover. The major genetic discontinuities in the region support the role of refugia during climatic oscillations, though not necessarily following the classically proposed scenarios. We identify in particular a genetic split between the North and the South of the Lower Guinean region. Finally we provide some perspectives for future study.     

Fluid inclusion and cathodoluminescence studies on fluorite from the Kerio valley, Kenya

The Kerio valley lies between the Elgeyo escarpment and the Tugen hills which mark the western margin of the Kenya rift valley. The main fluorite deposits are located in the southern part of the valley at Kimwarer, Choff and Kamnaon.Three types of inclusion fillings were identified: Liquid+Vapour, Liquid+Daughter Minerals and Liquid. The L+V type is dominant. Inclusions occur as clusters, trails along the crystal growth zones and as isolated ones. Low salinities, apparently lower than the 5% wt. NaCl equivalent, were established. Homogenization temperatures suggest that fluorite mineralization took place at different stages and at temperatures between 120 and 180 °C. Isolated readings above 180°C may be referring to the original inclusions in limestone. These measurements and the absence of CO₂ in the inclusions, as well as the occurrence of vugs and crustifications with fluorite, suggest that mineralization took place at relatively shallow depths.Emission spectrum lines representing Eu²⁺, Dy³⁺, Tb³⁺ and Sm³⁺ in fluorite were identified. Sm³⁺ was detected only in the pinkish luminescence of veined fluorite, whereas the pinkish zone in banded fluorite contains Tb³⁺. Eu²⁺ which gives the strongest emission lines in the blue part of the visible spectrum, apparently is responsible for the strong blue cathodoluminescence (CL) in fluorite. The dominance of Eu²⁺ peaks further points to the fact that fluorite mineralization in the Kerio valley took place in an environment that was enriched in Lanthanide Rare Earth Elements (LREE). The presence of rare earths and radioactive elements in fluorite points towards their enrichment in the environment of fluorite mineralization. A juvenile origin of mineral forming solutions is proposed.Two generations of fluorite were established: allotriomorphic fluorite, forming the matrix, and the idiomorphic variety, occurring either in barite or in druzes in early fluorite. Barite in turn forms idiomorphic crystals in allotriomorphic fluorite. Relics of calcite occur in both K-feldspars and in early fluorite. Oxides and hydroxides of Fe, Mn, Ti and Al commonly occur in open spaces in fluorite. Of significance is the presence of gold in fluorite. Fluorite mineralization is of hydrothermal origin in the post-Miocene era and was formed as a result of metasomatic replacement of marble and open space fillings.     

Application of the photoacoustic method for characterization of natural galena (PbS)

Electron transport properties of single crystal and polycrystalline natural mineral galena (PbS) samples from the Trep?a mine, Yugoslavia, were determined using the photoacoustic frequency transmission technique. Their thermal diffusivity (D _T≈0.16 × 10^?5 m² s^?1), the coefficient of diffusion (D between 0.15×10^?2 0.16×10^?2 m² s^?1) and lifetime of the excess carrier (τ≈35 μs and the front and rear recombination velocity (s _g≈65.5 m s^?1 and s _b≈66.4 m s^?1, respectively), were calculated by comparing the experimental results and the theoretical photoacoustic amplitude and phase signals. The lattice parameter obtained by X-ray work was a?=5.936?Å. The free carrier concentration of these single-crystal samples was measured using the Hall method (N?=?3×10¹⁸ cm^?3). Measurements of the optical reflectivity of the same samples, as a function of wavelength, in the infrared and far infrared ranges, were performed. In the far infrared range a free electron plasma frequency was observed and numerically analyzed, using the least-squares fitting procedure. The values of optical parameters were calculated and the value of the free carrier concentration obtained by the Hall method was confirmed.     

Reaction rims of orthopyroxene and plagioclase around chrome spinels in olivine from Skye and Rhum (NW Scotland)

Reaction between chrome spinel and its supernatant magma due to changes in magmatic composition or temperature is well known; its effects can be observed in these rocks. However, evidence of solid-solid reaction between chrome spinels and enclosing olivine is also present, in the form of relict diffusion profiles in some of the olivines, and an orthopyroxene reaction product rimming the spinel. In addition, the Rhum specimens contain rims of plagioclase resulting from solid-liquid reaction around chrome spinels within the margins of olivine. Detailed microprobe traverses and analysis of reaction products have been made in an attempt to determine the equations for these reactions.     

Determination of the anisotropic thermal conductivity of the Boom Clay based on a combined numerical interpretation of two in situ heater tests at different scales

Acta Geotechnica - In the HADES underground research laboratory in Belgium, a large-scale PRACLAY Heater test and a small-scale ATLAS Heater test are performed to examine the...     

A Raman spectroscopic study on the structural disorder of monazite–(Ce)

This study addresses whether Raman spectra can be used to estimate the degree of accumulated radiation damage in monazite-(Ce) samples whose chemical composition was previously determined. Our results indicate that the degree of disorder in monazite–(Ce), as observed from increasing Raman band broadening, generally depends on both the structural state (i.e., radiation damage) and the chemical composition (i.e., incorporation of non-formula elements). The chemical effects were studied on synthetic orthophosphates grown using the Li-Mo flux method, and non radiation-damaged analogues of the naturally radiation-damaged monazite–(Ce) samples, produced by dry annealing. We found that the “chemical” Raman-band broadening of natural monazite–(Ce) can be predicted by the empirical formula, $$ {\hbox{FWHM}} {\hbox{[c}}{{\hbox{m}}^{ - {1}}}{]} = {3}{.95} + {26}{.66} \times {\hbox{(Th}} + {\hbox{U}} + {\hbox{Ca}} + {\hbox{Pb)}} {\hbox{[apfu]}} $$ where, FWHM = full width at half maximum of the main Raman band of monazite–(Ce) (i.e., the symmetric PO₄ stretching near 970?cm^?1), and (Th+U+Ca+Pb) = sum of the four elements in apfu (atoms per formula unit). Provided the chemical composition of a natural monazite–(Ce) is known, this “chemical band broadening” can be used to estimate the degree of structural radiation damage from the observed FWHM of the ν₁(PO₄) band of that particular sample using Raman spectroscopy. Our annealing studies on a wide range of monazite–(Ce) reference materials and other monazite–(Ce) samples confirmed that this mineral virtually never becomes highly radiation damaged. Potential advantages and the practical use of the proposed method in the Earth sciences are discussed.     

Surface changes on crystalline stones due to salt crystallisation

This study assesses the changes on the surface of crystalline stones due to salt crystallisation. Efflorescence was forced to grow on the surface of granite and marbles through 60 cycles of salt crystallisation with sodium sulphate. Changes on surface roughness, gloss and colour were measured every 15 cycles and the specimens were examined with naked eye and SEM. Sodium sulphate produces damage which depends on mineral composition. Results show that granites experience a mechanical decay with an increase in roughness. Peaks of mica can be observed on the surface and cracks widen and grow deeper. Colour and gloss do not show any significant change, although gloss decreases with an increase in surface roughness. In marbles, the decay is mainly chemical. Surface roughness increases due to dissolution of the calcite. White marbles exhibit yellowing. Gloss decreases during the first cycles—as grain boundaries become more visible—but tends to regain almost its initial value as the number of cycles increases. In this case, gloss does not show any relation with surface roughness.     

Effects of sludge pretreatment on sludge reduction in a lab-scale anaerobic/anoxic/oxic system treating domestic wastewater

Excess sludge disposal is one of the serious challenges in biological wastewater treatment. Reduction of sludge production would be an ideal way to solve sludge-associated problems rather than the post-treatment of the sludge produced. In this study, a new wastewater treatment process combining anaerobic/anoxic/oxic system with thermochemical sludge pretreatment was tested in a laboratory scale experiment. In this study, the effects of the sludge pretreatment on the excess sludge production in anaerobic/anoxic/oxic were investigated. The system was operated in two Runs (1 and 2). In Run 1, the system was operated as a reference and in Run 2, a part of the mixed liquid was pretreated thermochemically and was returned to the bioreactor. The average solubilization efficiency of pretreated sludge was found to be about 35 % during the study period of 220 days. Sludge production rate in Run 2 was less than that in Run 1 by about 52 %. Total phosphorous was removed by enhanced biological phosphorous removal with the removal efficiency of 83–87 % and 81–83 % for Run 1 and Run 2, respectively. Total nitrogen removal in Run 2 (79–82 %) was slightly higher than that in Run 1 (68–75 %). The mixed liquor suspended solids/mixed liquor volatile suspended solids ratio was identical after both runs in the range 78–83 %. The effluent water qualities were not significantly affected when operated with thermochemical pretreatment at pH 11 and 60 °C for 3 h during 7 months. From the present study it is concluded that thermochemical sludge pretreatment of anaerobic/anoxic/oxic process plays an important role in reduction of sludge production.     

Cordieritite and Leucogranite Formation during Emplacement of Highly Peraluminous Magma: the El Pilon Granite Complex (Sierras Pampeanas, Argentina)

Cordieritites and highly peraluminous granites within the ElPilón granite complex, Sierras Pampeanas, Argentina,were emplaced during a medium-P, high-T metamorphic event duringthe initial decompression of a Cambrian orogen along the southwesternmargin of Gondwana. Very fresh orbicular and massive cordierititebodies with up to 90% cordieritite are genetically associatedwith a cordierite monzogranite pluton and a larger body of porphyriticgranodiorite. The petrogenesis of this association has beenstudied using petrographical, mineralogical, thermobarometric,geochemical, geochronological and isotope methods. The graniticmagmas were formed by anatexis of mid-crustal metamorphic rocksformed earlier in the Pampean orogeny. The cordieritites appearat the top of feeder conduits that connected the source regionlocated at