Cobble cam: grain‐size measurements of sand to boulder from digital photographs and autocorrelation analyses

A new application of the autocorrelation grain size analysis technique for mixed to coarse sediment settings has been investigated. Photographs of sand‐ to boulder‐sized sediment along the Elwha River delta beach were taken from approximately 1·2 m above the ground surface, and detailed grain size measurements were made from 32 of these sites for calibration and validation. Digital photographs were found to provide accurate estimates of the long and intermediate axes of the surface sediment (r² > 0·98), but poor estimates of the short axes (r² = 0·68), suggesting that these short axes were naturally oriented in the vertical dimension. The autocorrelation method was successfully applied resulting in total irreducible error of 14% over a range of mean grain sizes of 1 to 200 mm. Compared with reported edge and object‐detection results, it is noted that the autocorrelation method presented here has lower error and can be applied to a much broader range of mean grain sizes without altering the physical set‐up of the camera (～200‐fold versus ～6‐fold). The approach is considerably less sensitive to lighting conditions than object‐detection methods, although autocorrelation estimates do improve when measures are taken to shade sediments from direct sunlight. The effects of wet and dry conditions are also evaluated and discussed. The technique provides an estimate of grain size sorting from the easily calculated autocorrelation standard error, which is correlated with the graphical standard deviation at an r² of 0·69. The technique is transferable to other sites when calibrated with linear corrections based on photo‐based measurements, as shown by excellent grain‐size analysis results (r² = 0·97, irreducible error = 16%) from samples from the mixed grain size beaches of Kachemak Bay, Alaska. Thus, a method has been developed to measure mean grain size and sorting properties of coarse sediments. Copyright © 2009 John Wiley & Sons, Ltd.     

Student Learning in an Introductory GIS Course: Using a Project‐Based Approach

Introductory courses in Geographic Information Science (GIS) expose students to the concepts and practices necessary for future academic and professional use of GIS tools. Traditional GIS courses balance lectures in the theories of GIS with pre‐built and pre‐packaged lab activities to learn the practices of GIS. This article presents a case study of an experimental introductory course in which students conducted novel, independent project‐based group research under the supervision of graduate or advanced undergraduate students enrolled in the course, culminating in a class presentation and publication quality paper. Surveys and interviews indicated that students reacted more positively to project‐based group research than to traditional activities. Students felt the projects better prepared them for ‘real world’ applications of GIS, and recommend project‐based group research in other GIS coursework. Additionally, our findings indicate that students appreciate interactions with peers of varying skill levels and experiences, as these broaden their capabilities to work with other GIS users.     

Important considerations about space‐time data: Modeling,scrutiny, and ratification

Space‐time data are becoming more abundant as time goes by, with hands‐on interest in them becoming more prevalent. These data have a very sensitive ordering in space and time, one that the simplest of recording errors can scramble. These data are also complex, containing both spatial and temporal autocorrelation coupled with their interaction. One goal of many researchers is to disentangle and account for these autocorrelation components in a parsimonious way. This article presents three competing model specifications to achieve this end. In addition, it outlines seven best practices for vetting space‐time datasets. This article cites a publicly available corrupt (containing at least errors of omission) rabies dataset to illustrate how a large volume of potentially valuable data can be rendered meaningless. In addition, it exemplifies postulated contentions about the United States National Cancer Institute Surveillance, Epidemiology, and End Results Program’s 1969–2018 population‐by‐county dataset, a collection of population counts held in high esteem. One major empirical finding is that this particular dataset exhibits traits that may merit remedial revisions action. A key conceptual finding is a suggested set of best practices for space‐time data proofreading. These two findings contribute to an ultimate goal of a large collection of certified open access space‐time datasets supporting repeatable and replicable scientific analyses.     

http://www.sciencedirect.com/science/article/pii/S167498711400067X

The Proterozoic Bamble Sector, South Norway, is one of the world＇s classic amphiboliteto granulite- facies transition zones. It is characterized by a well-developed isograd sequence, with isolated ＇granulite-facies islands＇ in the amphibolite-facies portion of the transition zone. The area is notable for the discovery of C02-dominated fluid inclusions in the granolite-facies rocks by Jacques Touter in the late 1960＇s, which triggered discussion of the role of carbonic fluids during granulite genesis. The aim of this review is to provide an overview of the current state of knowledge of the Bamble Sector, with an emphasis on the Arendal-Froland-Nelaug-Tvedestrand area and off shore islands （most prominantly Tromay and Hisoy） where the transition zone is best developed. After a brief overview of the history of geological research and mining in the area, aspects of sedimentary, metamorphic and magmatic petrology of the Bamble Sector are discussed, including the role of fluids. Issues relevant to current geotectonic models for SW Scandinavia, directly related to the Bamble Sector, are discussed at the end of the review.     

Field characterization and data integration to define the hydraulic heterogeneity of a shallow granular aquifer at a sub-watershed scale

Providing a sound basis for aquifer management or remediation requires that hydrogeological investigations carried out to understand groundwater flow and contaminant transport be based on representative data that capture the heterogeneous spatial distribution of aquifer hydraulic properties. This paper describes a general workflow allowing the characterization of the heterogeneity of the hydraulic properties of granular aquifers at an intermediate scale of a few km². The workflow involves characterization and data integration steps that were applied on a 12-km² study area encompassing a decommissioned landfill emitting a leachate plume and its main surface water receptors. The sediments composing the aquifer were deposited in a littoral–sublittoral environment and show evidence of small-scale transitional heterogeneities. Cone penetrometer tests (CPT) combined with soil moisture and electrical resistivity (SMR) measurements were thus used to identify and characterize spatial heterogeneities in hydraulic properties over the study area. Site-specific statistical relationships were needed to infer hydrofacies units and to estimate hydraulic properties from high-resolution CPT/SMR soundings distributed all over the study area. A learning machine approach was used due to the complex statistical relationships between colocated hydraulic and CPT/SMR data covering the full range of aquifer materials. Application of this workflow allowed the identification of hydrofacies units and the estimation of horizontal hydraulic conductivity, vertical hydraulic conductivity and porosity over the study area. The paper describes and discusses data acquisition and integration methodologies that can be adapted to different field situations, while making the aquifer characterization process more time-efficient and less labor-intensive.     

Social and economic vulnerability of coastal communities to sea-level rise and extreme flooding

This paper assesses the socioeconomic consequences of extreme coastal flooding events. Wealth and income impacts associated with different social groups in coastal communities in Israel are estimated. A range of coastal flood hazard zones based on different scenarios are identified. These are superimposed on a composite social vulnerability index to highlight the spatial variation in the socioeconomic structure of those areas exposed to flooding. Economic vulnerability is captured by the exposure of wealth and income. For the former, we correlate the distribution of housing stock at risk with the socioeconomic characteristics of threatened populations. We also estimate the value of residential assets exposed under the different scenarios. For the latter, we calculate the observed change in income distribution of the population under threat of inundation. We interpret the change in income distribution as an indicator of recovery potential.     

Does stress transmission in forelands depend on structural style? Distinctive stress magnitudes during Sevier thin‐skinned and Laramide thick‐skinned layer‐parallel shortening in the Bighorn Basin (USA) revealed by stylolite and calcite twinning paleopiezometry

The Sheep Mountain‐Little Sheep Mountain Anticlines, Bighorn Basin (USA) formed as basement‐cored Laramide structures in the formerly undeformed foreland of the thin‐skinned Sevier orogen. We take advantage of the well‐constrained microstructural network there to reconstruct differential stress magnitudes that prevailed during both Sevier and Laramide layer‐parallel shortening (LPS), before the onset of large‐scale folding. Differential stress magnitudes determined from tectonic stylolites are compared and combined to previous stress estimates from calcite twinning paleopiezometry in the same formations. During stress loading related to LPS, differential stress magnitudes transmitted from the distant Sevier thin‐skinned orogen into the sedimentary cover of the Bighorn basin (11–43 MPa) are higher than the differential stress magnitudes accompanying the early stage of LPS related to the thick‐skinned Laramide deformation (2–19 MPa). This study illustrates that the tectonic style of an orogen affects the transmission of early orogenic stress into the stable continental interior.     

Synchrotron IR study of hydrous ringwoodite (γ-Mg2SiO4) up to 30 GPa

High-pressure synchrotron infrared (IR) absorption spectra were collected between 650 and 4,000 cm⁻¹ at ambient temperature for hydrous Mg-ringwoodite (γ-Mg₂SiO₄) up to 30 GPa. The main feature in the OH⁻ stretching region is an extremely broad band centred at 3,150 cm⁻¹. The hydrogen bond is strong for most protons and the most probable site for protonation is the tetrahedral edge. With increasing pressure, this band shifts downward while decreasing its integrated intensity until disappearance at a pressure of 25 GPa. Only one band at 2,450 cm⁻¹ and an absorption plateau persist with a maximum wavenumber of 3,800 cm⁻¹. This behaviour is reversible upon pressure release. We interpret this as a second-order phase transition occurring in hydrated Mg-ringwoodite at high pressure (beyond ∼ 25 GPa). This result is compatible with the observation by Kleppe et al. (Phys Chem Miner 29:473–476, 2002a) who suggested the presence of Si–O–Si linkages and/or partial increase in the coordination of Si. Beyond the phase transition, the protons are delocalized and their environment on the ringwoodite structure is probably quite different from that at low pressure. Data obtained in situ at high pressures and temperatures are needed to better understand the effect of protonation on the structure and to better constrain this phase transition.     

Orthophosphate and biotite chemistry from orthopyroxene-bearing migmatites from California and South India: The role of a fluid-phase in the evolution of granulite-facies migmatites

Migmatites from Cone Peak, California, USA and the Satnur-Sangam road, Southern Karnataka, India contain coarser grained orthopyroxene-bearing leucosomes with subordinate biotite in finer grained hornblende-biotite-pyroxene-bearing hosts. At both localities the leucosomes are enriched in quartz and feldspar and have a higher ratio of pyroxene to hornblende + biotite compared to the host rocks. Biotite grains in leucosomes along the Satnur-Sangam road are concentrated at the margins of orthopyroxene grains and have lower abundances of Ti, Fe, and Cl and a higher abundance of F than biotite grains from the host rock. Fluorapatite grains in all rocks from both localities contain monazite inclusions similar to those produced experimentally by metasomatically induced dissolution and reprecipitation. Some fluorapatite grains at both localities are partially rimmed by allanite. The only compositional differences found between fluorapatite grains in the leucosomes and host rocks were higher concentrations of Cl in grains in leucosomes from Cone Peak. The mineralogies of the rocks suggest that the leucosomes formed by dehydration melting reactions that consumed feldspar, quartz, hornblende, and biotite and produced orthopyroxene. Allanite rims at the margins of fluorapatite grains may have formed by the later retrogression of monazite rims formed by incongruent dissolution of fluorapatite in the melt. Biotite grains at the margins of orthopyroxene crystals in the leucosomes from the Satnur-Sangam road apparently formed by retrogression of orthopyroxene upon the solidification of the anatectic melt. A similar high-grade retrogression did not affect orthopyroxene crystals at Cone Peak, indicating that H₂O was removed from the crystallizing leucosomes probably in a low H₂O activity fluid. Compositional differences between the paleosome and neosomes at Cone Peak are best explained by metasomatic interaction with concentrated brines while elevated Cl concentrations in fluorapatites in the leucosome suggest interaction with a Cl-bearing fluid. Brines may have been responsible for an exchange of elements between the host rock along the Satnur-Sangam road and zones of melt generation now marked by leucosomes, but fluid flow appears to have been less vigorous than at Cone Peak.     

Deconvolving the δO seawater component from subseasonal coral δO and Sr/Ca at Rarotonga in the southwestern subtropical Pacific for the period 1726 to 1997

To reconstruct oceanographic variations in the subtropical South Pacific, 271-year long subseasonal time series of Sr/Ca and δ¹⁸O were generated from a coral growing at Rarotonga (21.5°S, 159.5°W). In this case, coral Sr/Ca appears to be an excellent proxy for sea surface temperature (SST) and coral δ¹⁸O is a function of both SST and seawater δ¹⁸O composition (δ¹⁸O_sw). Here, we focus on extracting the δ¹⁸O_sw signal from these proxy records. A method is presented assuming that coral Sr/Ca is solely a function of SST and that coral δ¹⁸O is a function of both SST and δ¹⁸O_sw. This method separates the effects of δ¹⁸O_sw from SST by breaking the instantaneous changes of coral δ¹⁸O into separate contributions by instantaneous SST and δ¹⁸O_sw changes, respectively. The results show that on average δ¹⁸O_sw at Rarotonga explains ∼39% of the variance in δ¹⁸O and that variations in SST explains the remaining ∼61% of δ¹⁸O variance. Reconstructed δ¹⁸O_sw shows systematic increases in summer months (December-February) consistent with the regional pattern of variations in precipitation and evaporation. The δ¹⁸O_sw also shows a positive linear correlation with satellite-derived estimated salinity for the period 1980 to 1997 (r = 0.72). This linear correlation between reconstructed δ¹⁸O_sw and salinity makes it possible to use the reconstructed δ¹⁸O_sw to estimate the past interannual and decadal salinity changes in this region. Comparisons of coral δ¹⁸O and δ¹⁸O_sw at Rarotonga with the Pacific decadal oscillation index suggest that the decadal and interdecadal salinity and SST variability at Rarotonga appears to be related to basin-scale decadal variability in the Pacific.