Critical Review of the Hypervib1 Model to Assess Pile Vibro-Drivability

The vibratory driving technique is used for driving piles, sheet piles, tubes and rods into the ground by imparting to the element a longitudinal periodic motion. The small amplitude vibrations induced by the equipment reduce the ground resistance which allows penetration under the action of a relatively small axial force. The technique offers an alternative to impact driving due to lower installation costs and reduced environmental disturbance (noise, vibration, etc.) especially in sensitive environments, such as industrial and urban sites or offshore wind farm sites. The vibratory technique is also preferred when the maximum stress levels imparted to the driven element are of concern. Despite the advantages of the vibratory driving technique, its application remains however mainly driven by pragmatic aspects. Within that context, the access to experience databases and full-scale field test results is of valuable interest. The aim of this paper is to review the Hypervib1 model developed by (Holeyman 1993) for assessing the vibratory drivability of piles and sheet piles, based on the analysis of such experimental results. New findings and developments brought to the model are discussed. Conclusions in terms of reliability of the method are finally drawn.     

GPR Signatures of Pipes and Walls with Emphasis on the Effect of Inclined Scanning Trajectory

This study investigates the effects of some commonly encountered constraints such as inclined scanning trajectory, multiple targets in the vicinity and material variation on GPR responses of pipes and walls. Further, the effects of wall inclination and broken walls are also explored in GPR signatures. Interpretation of such signatures in GPR data for archaeological and geotechnical surveys has been a challenge. A physical model was created to simulate buried pipes and walls under controlled conditions by maintaining density and moisture content of the soil medium. The presence of PVC pipes, plastered brick and stone walls buried in the dry sand have been investigated and major observations have been reported. The inclined scanning trajectory on buried pipes shows a change in curvature of hyperbola-like signatures. Inclined transects near the ends of pipes and walls manifest single limb GPR signatures. The responses of multiple pipes and walls show dependence on separation of targets and footprint of an antenna. One can discern stone walls from brick walls by recognizing the diffraction of waves by irregular stones in GPR responses. The signatures of walls differ from pipes with respect to the width of the apex and variation in the intensity in the limb.     

Community vulnerability to hazards: introducing local expert knowledge into the equation

The accuracies of three different evolutionary artificial neural network (ANN) approaches, ANN with genetic algorithm (ANN-GA), ANN with particle swarm optimization (ANN-PSO) and ANN with imperialist competitive algorithm (ANN-ICA), were compared in estimating groundwater levels (GWL) based on precipitation, evaporation and previous GWL data. The input combinations determined using auto-, partial auto- and cross-correlation analyses and tried for each model are: (i) GWL _t?1 and GWL _t?2; (ii) GWL _t?1, GWL _t?2 and P _t ; (iii) GWL _t?1, GWL _t?2 and E _t ; (iv) GWL _t?1, GWL _t?2, P _t and E _t ; (v) GWL _t?1, GWL _t?2 and P _t?1 where GWL _t , P _t and E _t indicate the GWL, precipitation and evaporation at time t, individually. The optimal ANN-GA, ANN-PSO and ANN-ICA models were obtained by trying various control parameters. The best accuracies of the ANN-GA, ANN-PSO and ANN-ICA models were obtained from input combination (i). The mean square error accuracies of the ANN-GA and ANN-ICA models were increased by 165 and 124% using ANN-PSO model. The results indicated that the ANN-PSO model performed better than the other models in modeling monthly groundwater levels.     

Analytical derivation of water retention for random monodisperse granular media

The mechanics of water retention in unsaturated granular media is of critical importance to a broad range of disciplines including soil science, geotechnical engineering, hydrology and agriculture. Fundamental to water retention is the relationship between degree of saturation and suction, referred to as the water retention curve (WRC). The majority of WRC models are empirically based and seldom incorporate physically meaningful parameters. This study presents an analytical model for the WRC that considers separate contributions from fully filled pores and partially filled pores containing liquid bridges. A recently established unique k-gamma pore volume distribution function for randomly assembled monodisperse granular materials is adopted to determine the contributions of fully filled pores. Calculation of the contribution of residual pore water retained in partially filled pores is undertaken by representing pores as individual cells shaped as platonic shapes of various sizes and determining the volume of all liquid bridges suspended between particles within the pore cells. Weighting factors for the various cell types are obtained from the pore volume distribution to determine the relative contribution of different pore cell geometries to the total residual pore water. The combined model accurately describes experimental data for monodisperse spherical glass beads for both wetting and drying, even though the underlying assumptions do not reflect exactly the complex, interconnected and highly irregular geometry of the pore space. A single parameter provides the lateral shift between the wetting and drying curves. The results of this study provide a geometric understanding of the mechanisms of water retention in granular media.     

The junction of Fensch and Moselle rivers,France; mineralogy and composition of river materials

The Moselle river flows in the north-east of France, from Vosges Mountains to neighboring countries Luxembourg and Germany. One of its tributaries, the Fensch river, drains a highly industrialized watershed, strongly impacted by mining, smelting and surfacing activities. The objective of this work, part of a general research program on Moselle watershed (Zone Atelier Moselle) was to assess the impact of the polluted Fensch river on the global quality of the Moselle river. For that purpose, water, sediments and suspended particulate matter were sampled in both rivers, upstream and downstream the junction. Four main sampling campaigns were carried out, in winter during a flood event and in spring at low water level. On a first step, mineralogical analyses (XRD and FTIR) and chemical analyses (ICP-MS, ICP-AES), were performed on sediments, suspended particulate matters and filtered waters. Major and trace elements concentrations were obtained on two different granulometric fractions (0–2 mm and 0–50 μm) revealing the enrichment in heavy metals of fine particles. From one collecting campaign to another, seasonal variations could be evidenced on suspended matter composition even though major minerals (calcite, quartz and kaolinite) were always present. Furthermore, spatial variations were evidenced for Fensch and Moselle downstream sediments. Thus, very fine-grained sediments, poorly crystallized, displaying at the same time higher metal concentrations and higher organic matter content than in Fensch river material, were collected downstream, in a low hydrodynamic conditions zone, assumed as a preferential sedimentary zone or even as a placer. Strong correlations could be revealed between iron content and contaminant concentrations, confirming the origin of polluted material.     

Stratigraphy and geochemistry of pillow basalts within the ophiolitic mélange of the Izmir–Ankara–Erzincan suture zone: implications for the geotectonic character of the northern branch of Neotethys

The Izmir-Ankara-Erzincan suture zone of Turkey is a broad zone of ophiolitic mélange containing numerous fragmented blocks ranging in age from Triassic to Cretaceous. Stratigraphic sequences for various mélange units are compared, together with the geochemistry of associated basaltic pillow lavas of Cretaceous age. A review of geochemical data for the pillow lavas demonstrate: (a) a dominant group of alkalic basalts with enriched incompatible elements, variable Zr/Y and Zr/Nb ratios, and (b) a range of tholeiitic basalts with slightly depleted to mildly enriched (normalized) rare earth patterns, (La/Yb)_N 0.4-3.0, and generally low Zr/Y ratios. The alkalic basalts can be chemically matched to Pacific Ocean seamounts, although the close association of red radiolarites and cherts suggests that many basalts represent the margins of such structures, rather than the main seamount edifice. Nd-Sr isotope data are typical for ocean island basalts and represent an admixture of a dominant EM-1 source and a depleted MORB-like source. Enhanced δ¹⁸O compositions are a consequence of submarine alteration and not crustal contamination. Tholeiitic compositions have affinities with both N- and E-type MORB, although most are probably representative of tholeiitic ocean islands. Overall the basalts are mainly representative of structures built on the ocean floor, rather than the oceanic crust itself, being scraped off the subducting crust and preserved in the mélange of the accretionary wedge.     

Inverse groundwater modelling in the Willunga Basin,South Australia

A new inverse technique for modelling groundwater flow, based on a functional minimization technique, has been used to calibrate a groundwater flow model of a subregion of the Port Willunga aquifer within the Willunga Basin in South Australia. The Willunga Basin is the location of extensive viticulture, irrigated primarily by groundwater, the levels and quality of which have declined significantly over the last 40 years. The new method is able to generate estimates of transmissivity, storativity and groundwater recharge over the whole subregion as a time-varying continuous surface; previous methods estimate local discrete parameter values at specific times. The new method has also been shown to produce accurate head values for the subregion and very good estimates of groundwater recharge. Its ultimate goal will be to provide a new and invaluable tool for significantly improved groundwater resource management. Supported in part by US National Science Foundation grants, DMS-0107492 and DMS-0079478.     

Vulnerability assessment in a volcanic risk evaluation in Central Mexico through a multi-criteria-GIS approach

The Valley of Toluca is a major industrial and agricultural area in Central Mexico, especially the City of Toluca, the capital of The State of Mexico. The Nevado de Toluca volcano is located to the southwest of The Toluca Basin. Results obtained from the vulnerability assessment phase of the study area (5,040 km² and 42 municipalities) are presented here as a part of a comprehensive volcanic risk assessment of The Toluca Basin. Information has been gathered and processed at a municipal level including thematic maps at 1:250,000 scale. A database has been built, classified and analyzed within a GIS environment; additionally, a Multi-Criteria Evaluation (MCE) approach was applied as an aid for the decision-making process. Cartographic results were five vulnerability maps: (1) Total Population, (2) Land Use/Cover, (3) Infrastructure, (4) Economic Units and (5) Total Vulnerability. Our main results suggest that the Toluca and Tianguistenco urban and industrial areas, to the north and northeast of The Valley of Toluca, are the most vulnerable areas, for their high concentration of population, infrastructure, economic activity, and exposure to volcanic events.     

Impact of recharge water temperature on bioclogging during managed aquifer recharge: a laboratory study

To investigate the effect of recharge water temperature on bioclogging processes and mechanisms during seasonal managed aquifer recharge (MAR), two groups of laboratory percolation experiments were conducted: a winter test and a summer test. The temperatures were controlled at ~5±2 and ~15±3 °C, and the tests involved bacterial inoculums acquired from well water during March 2014 and August 2015, for the winter and summer tests, respectively. The results indicated that the sand columns clogged ~10 times faster in the summer test due to a 10-fold larger bacterial growth rate. The maximum concentrations of total extracellular polymeric substances (EPS) in the winter test were approximately twice those in the summer test, primarily caused by a ~200 μg/g sand increase of both loosely bound EPS (LB-EPS) and tightly bound EPS (TB-EPS). In the first half of the experimental period, the accumulation of bacteria cells and EPS production induced rapid bioclogging in both the winter and summer tests. Afterward, increasing bacterial growth dominated the bioclogging in the summer test, while the accumulation of LB-EPS led to further bioclogging in the winter test. The biological analysis determined that the dominant bacteria in experiments for both seasons were different and the bacterial community diversity was ~50% higher in the winter test than that for summer. The seasonal inoculums could lead to differences in the bacterial community structure and diversity, while recharge water temperature was considered to be a major factor influencing the bacterial growth rate and metabolism behavior during the seasonal bioclogging process.     

Landslides triggered by the 2016 Mj 7.3 Kumamoto,Japan, earthquake

The aim of this study is to establish a detailed and complete inventory of the landslides triggered by the Mj 7.3 (Mw 7.0) Kumamoto, Japan, earthquake sequence of 15 April 2016 (16 April in JST). Based on high-resolution (0.5–2 m) optical satellite images, we delineated 3,467 individual landslides triggered by the earthquake, occupying an area of about 6.9 km². Then they were validated by aerial photographs with very high-resolution (better than 0.5 m) and oblique field photos. Of them, 3,460 landslides are distributed in an elliptical area about 6000 km², with a NE-SW directed 120-km-long long axis and a 60-km-long NW-SE trending short axis. Most of the landslides are shallow, disrupted falls and slides, with a few flow-type slides and rock and soil avalanches. The analysis of correlation between the landslides and several control factors shows the areas of elevation 1000–1200 m, stratum of Q₃-Hvf, seismic intensity VIII and VIII+, and peak ground acceleration (PGA) 0.4–0.6 g register the highest landslide abundance. This study also discussed the relationship between the spatial pattern of the landslides and the seismotectonic structure featured by a strike-slip fault with a normal component and the volcanism in the study area.